Re: [PATCH net-next 0/8] net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode

From: Jakub Kicinski
Date: Fri Oct 02 2020 - 19:07:56 EST


On Fri, 2 Oct 2020 16:04:21 -0700 Jakub Kicinski wrote:
> On Fri, 2 Oct 2020 12:56:43 +0300 Grygorii Strashko wrote:
> > On 02/10/2020 02:08, Jakub Kicinski wrote:
> > > On Thu, 1 Oct 2020 13:52:50 +0300 Grygorii Strashko wrote:
> > >> This series adds multi-port support in mac-only mode (multi MAC mode) to TI
> > >> AM65x CPSW driver in preparation for enabling support for multi-port devices,
> > >> like Main CPSW0 on K3 J721E SoC or future CPSW3g on K3 AM64x SoC.
> > >>
> > >> The multi MAC mode is implemented by configuring every enabled port in "mac-only"
> > >> mode (all ingress packets are sent only to the Host port and egress packets
> > >> directed to target Ext. Port) and creating separate net_device for
> > >> every enabled Ext. port.
> > >
> > > Do I get it right that you select the mode based on platform? Can the
> > > other mode still be supported on these platforms?
> > >
> > > Is this a transition to normal DSA mode where ports always have netdevs?
> >
> > The idea here is to start in multi mac mode by default, as we still
> > have pretty high demand for this. Then, and we are working on it, the
> > switchdev mode is going to be introduces (not DSA). The switch
> > between modes will happen by using devlink option - the approach is
> > similar to what was used for Sitara CPSW cpsw_new.c driver [1].
>
> What's unclear from the patches is whether the default configuration
> for already supported platforms will change?
>
> All the patches sound like they are "in preparation for support of K3
> J721E" etc. So this is just code restructuring with no user-visible
> changes?

Another way of putting the question perhaps would be - is num_ports
always 1 for existing platforms?