[PATCH v3 06/21] spi: dw: Update Rx sample delay in the config function

From: Serge Semin
Date: Thu Oct 01 2020 - 18:29:02 EST


Rx sample delay can be SPI device specific, and should be synchronously
initialized with the rest of the communication and peripheral device
related controller setups. So let's move the Rx-sample delay setup into
the DW APB SSI configuration update method.

Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
---
drivers/spi/spi-dw-core.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 478262fb4f8e..87c8f0028a23 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -294,13 +294,18 @@ static void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
spi_set_clk(dws, clk_div);
dws->current_freq = speed_hz;
}
+
+ /* Update RX sample delay if required */
+ if (dws->cur_rx_sample_dly != chip->rx_sample_dly) {
+ dw_writel(dws, DW_SPI_RX_SAMPLE_DLY, chip->rx_sample_dly);
+ dws->cur_rx_sample_dly = chip->rx_sample_dly;
+ }
}

static int dw_spi_transfer_one(struct spi_controller *master,
struct spi_device *spi, struct spi_transfer *transfer)
{
struct dw_spi *dws = spi_controller_get_devdata(master);
- struct chip_data *chip = spi_get_ctldata(spi);
u8 imask = 0;
u16 txlevel = 0;
int ret;
@@ -326,12 +331,6 @@ static int dw_spi_transfer_one(struct spi_controller *master,
if (master->can_dma && master->can_dma(master, spi, transfer))
dws->dma_mapped = master->cur_msg_mapped;

- /* Update RX sample delay if required */
- if (dws->cur_rx_sample_dly != chip->rx_sample_dly) {
- dw_writel(dws, DW_SPI_RX_SAMPLE_DLY, chip->rx_sample_dly);
- dws->cur_rx_sample_dly = chip->rx_sample_dly;
- }
-
/* For poll mode just disable all interrupts */
spi_mask_intr(dws, 0xff);

--
2.27.0