Re: [PATCH v2] ARM: dts: r8a7742-iwg21d-q7: Add LCD support

From: Laurent Pinchart
Date: Sun Sep 27 2020 - 16:05:02 EST


Hi Prabhakar,

On Sun, Sep 27, 2020 at 02:01:50PM +0100, Lad, Prabhakar wrote:
> On Mon, Aug 24, 2020 at 1:48 AM Laurent Pinchart wrote:
> > On Thu, Aug 13, 2020 at 03:00:41PM +0100, Lad Prabhakar wrote:
> > > The iwg21d comes with a 7" capacitive touch screen, therefore
> > > add support for it.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
> >
> > Everything seems to match the schematics :-)
> >
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> >
> > > ---
> > > v1->v2
> > > * This patch is part of series [1] (rest of the patches have be accepted
> > > by Geert [2]).
> > > * Added regulator for lvds
> > > * Added reset pin for touchpanel
> > > * This patch is based on series [3]
> > >
> > > [1] https://patchwork.kernel.org/project/linux-renesas-soc/list/
> > > ?series=330277
> > > [2] https://git.kernel.org/pub/scm/linux/kernel/git/geert/
> > > renesas-devel.git/log/?h=renesas-arm-dt-for-v5.10
> > > [3] https://patchwork.kernel.org/project/linux-renesas-soc/list/
> > > ?series=330957
> > > ---
> > > arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 99 +++++++++++++++++++++++++
> > > 1 file changed, 99 insertions(+)
>
> Would you be queueing this patch along with DRM driver patches for v5.10 ?

No, I expect Geert to do so, DT patches go through his tree. I handle
the drivers and DT bindings.

> > > diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> > > index b3461a61a4bf..9bf4fbd9c736 100644
> > > --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> > > +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> > > @@ -30,6 +30,7 @@
> > >
> > > /dts-v1/;
> > > #include "r8a7742-iwg21m.dtsi"
> > > +#include <dt-bindings/pwm/pwm.h>
> > >
> > > / {
> > > model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H";
> > > @@ -52,6 +53,51 @@
> > > clock-frequency = <26000000>;
> > > };
> > >
> > > + lcd_backlight: backlight {
> > > + compatible = "pwm-backlight";
> > > + pwms = <&tpu 2 5000000 0>;
> > > + brightness-levels = <0 4 8 16 32 64 128 255>;
> > > + pinctrl-0 = <&backlight_pins>;
> > > + pinctrl-names = "default";
> > > + default-brightness-level = <7>;
> > > + enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
> > > + };
> > > +
> > > + lvds-receiver {
> > > + compatible = "ti,ds90cf384a", "lvds-decoder";
> > > + vcc-supply = <&vcc_3v3_tft1>;
> > > +
> > > + ports {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + port@0 {
> > > + reg = <0>;
> > > + lvds_receiver_in: endpoint {
> > > + remote-endpoint = <&lvds0_out>;
> > > + };
> > > + };
> > > + port@1 {
> > > + reg = <1>;
> > > + lvds_receiver_out: endpoint {
> > > + remote-endpoint = <&panel_in>;
> > > + };
> > > + };
> > > + };
> > > + };
> > > +
> > > + panel {
> > > + compatible = "edt,etm0700g0dh6";
> > > + backlight = <&lcd_backlight>;
> > > + power-supply = <&vcc_3v3_tft1>;
> > > +
> > > + port {
> > > + panel_in: endpoint {
> > > + remote-endpoint = <&lvds_receiver_out>;
> > > + };
> > > + };
> > > + };
> > > +
> > > reg_1p5v: 1p5v {
> > > compatible = "regulator-fixed";
> > > regulator-name = "1P5V";
> > > @@ -75,6 +121,17 @@
> > > };
> > > };
> > >
> > > + vcc_3v3_tft1: regulator-panel {
> > > + compatible = "regulator-fixed";
> > > +
> > > + regulator-name = "vcc-3v3-tft1";
> > > + regulator-min-microvolt = <3300000>;
> > > + regulator-max-microvolt = <3300000>;
> > > + enable-active-high;
> > > + startup-delay-us = <500>;
> > > + gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
> > > + };
> > > +
> > > vcc_sdhi2: regulator-vcc-sdhi2 {
> > > compatible = "regulator-fixed";
> > >
> > > @@ -129,12 +186,34 @@
> > > VDDIO-supply = <&reg_3p3v>;
> > > VDDD-supply = <&reg_1p5v>;
> > > };
> > > +
> > > + touch: touchpanel@38 {
> > > + compatible = "edt,edt-ft5406";
> > > + reg = <0x38>;
> > > + interrupt-parent = <&gpio0>;
> > > + interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
> > > + /* GP1_29 is also shared with audio codec reset pin */
> > > + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
> > > + vcc-supply = <&vcc_3v3_tft1>;
> > > + };
> > > };
> > >
> > > &cmt0 {
> > > status = "okay";
> > > };
> > >
> > > +&du {
> > > + status = "okay";
> > > +};
> > > +
> > > +&gpio0 {
> > > + touch-interrupt {
> > > + gpio-hog;
> > > + gpios = <24 GPIO_ACTIVE_LOW>;
> > > + input;
> > > + };
> > > +};
> > > +
> > > &hsusb {
> > > pinctrl-0 = <&usb0_pins>;
> > > pinctrl-names = "default";
> > > @@ -165,6 +244,11 @@
> > > function = "avb";
> > > };
> > >
> > > + backlight_pins: backlight {
> > > + groups = "tpu0_to2";
> > > + function = "tpu0";
> > > + };
> > > +
> > > i2c2_pins: i2c2 {
> > > groups = "i2c2_b";
> > > function = "i2c2";
> > > @@ -208,6 +292,17 @@
> > > };
> > > };
> > >
> > > +&lvds0 {
> > > + status = "okay";
> > > + ports {
> > > + port@1 {
> > > + lvds0_out: endpoint {
> > > + remote-endpoint = <&lvds_receiver_in>;
> > > + };
> > > + };
> > > + };
> > > +};
> > > +
> > > &rcar_sound {
> > > pinctrl-0 = <&sound_pins>;
> > > pinctrl-names = "default";
> > > @@ -261,6 +356,10 @@
> > > shared-pin;
> > > };
> > >
> > > +&tpu {
> > > + status = "okay";
> > > +};
> > > +
> > > &usbphy {
> > > status = "okay";
> > > };

--
Regards,

Laurent Pinchart