Re: [PATCH v3 2/2] PCI: dwc: Use an address in the driver data for MSI address

[Rob Herring]

+Niklas

On Fri, Sep 25, 2020 at 2:39 AM Jisheng Zhang
<Jisheng.Zhang@xxxxxxxxxxxxx> wrote:
>
> There's no need to allocate a page for the MSI address, we could use
> an address in the driver data.
>
> One side effect of this patch is fixing the MSI page leakage during
> suspend/resume. Take the pcie-tegra194.c for example, it calls
> dw_pcie_msi_init() in resume path, thus the previous MSI page is
> leaked.
>
> Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support")
> Suggested-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
> ---
>  .../pci/controller/dwc/pcie-designware-host.c | 22 ++-----------------
>  drivers/pci/controller/dwc/pcie-designware.h  |  1 -
>  2 files changed, 2 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index f08f4d97f321..bf25d783b5c5 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -126,9 +126,7 @@ static void dw_pci_setup_msi_msg(struct irq_data *d, struct msi_msg *msg)
>  {
>         struct pcie_port *pp = irq_data_get_irq_chip_data(d);
>         struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> -       u64 msi_target;
> -
> -       msi_target = (u64)pp->msi_data;
> +       u64 msi_target = virt_to_phys(&pp->msi_data);
>
>         msg->address_lo = lower_32_bits(msi_target);
>         msg->address_hi = upper_32_bits(msi_target);
> @@ -287,27 +285,11 @@ void dw_pcie_free_msi(struct pcie_port *pp)
>
>         irq_domain_remove(pp->msi_domain);
>         irq_domain_remove(pp->irq_domain);
> -
> -       if (pp->msi_page)
> -               __free_page(pp->msi_page);
>  }
>
>  void dw_pcie_msi_init(struct pcie_port *pp)
>  {
> -       struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> -       struct device *dev = pci->dev;
> -       u64 msi_target;
> -
> -       pp->msi_page = alloc_page(GFP_KERNEL);
> -       pp->msi_data = dma_map_page(dev, pp->msi_page, 0, PAGE_SIZE,
> -                                   DMA_FROM_DEVICE);
> -       if (dma_mapping_error(dev, pp->msi_data)) {
> -               dev_err(dev, "Failed to map MSI data\n");
> -               __free_page(pp->msi_page);
> -               pp->msi_page = NULL;
> -               return;
> -       }
> -       msi_target = (u64)pp->msi_data;
> +       u64 msi_target = virt_to_phys(&pp->msi_data);
>
>         /* Program the msi_data */
>         dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4,
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index f911760dcc69..a88e15a09745 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -195,7 +195,6 @@ struct pcie_port {
>         struct irq_domain       *irq_domain;
>         struct irq_domain       *msi_domain;
>         dma_addr_t              msi_data;

You should probably change the type here. u16 I guess since that's the
MSI data size.

With that,

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

Would be nice to hear from others that have touched this code as with
Fixes it's going to get backported.

Rob


> -       struct page             *msi_page;
>         struct irq_chip         *msi_irq_chip;
>         u32                     num_vectors;
>         u32                     irq_mask[MAX_MSI_CTRLS];
> --
> 2.28.0
>