[PATCH 4.19 28/37] net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware

From: Greg Kroah-Hartman
Date: Fri Sep 25 2020 - 08:54:32 EST


From: Masahiro Yamada <masahiroy@xxxxxxxxxx>

commit 63b903dfebdea92aa92ad337d8451a6fbfeabf9d upstream.

As far as I understood from the Kconfig help text, this build rule is
used to rebuild the driver firmware, which runs on an old m68k-based
chip. So, you need m68k tools for the firmware rebuild.

wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI.
So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other
words, ifeq ($(ARCH),m68k) is false here.

I am keeping the dead code for now, but rebuilding the firmware requires
'as68k' and 'ld68k', which I do not have in hand.

Instead, the kernel.org m68k GCC [1] successfully built it.

Allowing a user to pass in CROSS_COMPILE_M68K= is handier.

[1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz

Suggested-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Signed-off-by: Masahiro Yamada <masahiroy@xxxxxxxxxx>
Signed-off-by: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/wan/Kconfig | 2 +-
drivers/net/wan/Makefile | 12 ++++++------
2 files changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -199,7 +199,7 @@ config WANXL_BUILD_FIRMWARE
depends on WANXL && !PREVENT_FIRMWARE_BUILD
help
Allows you to rebuild firmware run by the QUICC processor.
- It requires as68k, ld68k and hexdump programs.
+ It requires m68k toolchains and hexdump programs.

You should never need this option, say N.

--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -41,17 +41,17 @@ $(obj)/wanxl.o: $(obj)/wanxlfw.inc

ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
ifeq ($(ARCH),m68k)
- AS68K = $(AS)
- LD68K = $(LD)
+ M68KAS = $(AS)
+ M68KLD = $(LD)
else
- AS68K = as68k
- LD68K = ld68k
+ M68KAS = $(CROSS_COMPILE_M68K)as
+ M68KLD = $(CROSS_COMPILE_M68K)ld
endif

quiet_cmd_build_wanxlfw = BLD FW $@
cmd_build_wanxlfw = \
- $(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(AS68K) -m68360 -o $(obj)/wanxlfw.o; \
- $(LD68K) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
+ $(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(M68KAS) -m68360 -o $(obj)/wanxlfw.o; \
+ $(M68KLD) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
hexdump -ve '"\n" 16/1 "0x%02X,"' $(obj)/wanxlfw.bin | sed 's/0x ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' >$(obj)/wanxlfw.inc; \
rm -f $(obj)/wanxlfw.bin $(obj)/wanxlfw.o