[PATCH v3] e1000e: Increase iteration on polling MDIC ready bit

From: Kai-Heng Feng
Date: Thu Sep 24 2020 - 12:45:58 EST


We are seeing the following error after S3 resume:
[ 704.746874] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
[ 704.844232] e1000e 0000:00:1f.6 eno1: MDI Write did not complete
[ 704.902817] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
[ 704.903075] e1000e 0000:00:1f.6 eno1: reading PHY page 769 (or 0x6020 shifted) reg 0x17
[ 704.903281] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
[ 704.903486] e1000e 0000:00:1f.6 eno1: writing PHY page 769 (or 0x6020 shifted) reg 0x17
[ 704.943155] e1000e 0000:00:1f.6 eno1: MDI Error
...
[ 705.108161] e1000e 0000:00:1f.6 eno1: Hardware Error

As Andrew Lunn pointed out, MDIO has nothing to do with phy, and indeed
increase polling iteration can resolve the issue.

The root cause is quite likely Intel ME, since it's a blackbox to the
kernel so the only approach we can take is to be patient and wait
longer.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
---
v3:
- Moving delay to end of loop doesn't save anytime, move it back.
- Point out this is quitely likely caused by Intel ME.

v2:
- Increase polling iteration instead of powering down the phy.

drivers/net/ethernet/intel/e1000e/phy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index e11c877595fb..e6d4acd90937 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -203,7 +203,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
* Increasing the time out as testing showed failures with
* the lower time out
*/
- for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 10); i++) {
udelay(50);
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
--
2.17.1