[PATCH 2/3] hwmon: (adm9240) Create functions for updating measure and config

From: Chris Packham
Date: Thu Sep 24 2020 - 04:51:21 EST


Split the body of adm9240_update_device() into two helper functions
adm9240_update_measure() and adm9240_update_config(). Although neither
of the new helpers returns an error yet lay the groundwork for
propagating failures through to the sysfs readers.

Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
drivers/hwmon/adm9240.c | 202 +++++++++++++++++++++++++++-------------
1 file changed, 138 insertions(+), 64 deletions(-)

diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index f95dde1b9c7f..951674de0b35 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -158,53 +158,100 @@ static void adm9240_write_fan_div(struct i2c_client *client, int nr,
nr + 1, 1 << old, 1 << fan_div);
}

-static struct adm9240_data *adm9240_update_device(struct device *dev)
+static int adm9240_update_measure(struct adm9240_data *data)
{
- struct adm9240_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
int i;

+ for (i = 0; i < 6; i++) { /* read voltages */
+ data->in[i] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_IN(i));
+ }
+ data->alarms = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_INT(0)) |
+ i2c_smbus_read_byte_data(client,
+ ADM9240_REG_INT(1)) << 8;
+
+ /*
+ * read temperature: assume temperature changes less than
+ * 0.5'C per two measurement cycles thus ignore possible
+ * but unlikely aliasing error on lsb reading. --Grant
+ */
+ data->temp = (i2c_smbus_read_byte_data(client,
+ ADM9240_REG_TEMP) << 8) |
+ i2c_smbus_read_byte_data(client,
+ ADM9240_REG_TEMP_CONF);
+
+ for (i = 0; i < 2; i++) { /* read fans */
+ data->fan[i] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_FAN(i));
+
+ /* adjust fan clock divider on overflow */
+ if (data->valid && data->fan[i] == 255 &&
+ data->fan_div[i] < 3) {
+
+ adm9240_write_fan_div(client, i,
+ ++data->fan_div[i]);
+
+ /* adjust fan_min if active, but not to 0 */
+ if (data->fan_min[i] < 255 &&
+ data->fan_min[i] >= 2)
+ data->fan_min[i] /= 2;
+ }
+ }
+
+ return 0;
+}
+
+static int adm9240_update_config(struct adm9240_data *data)
+{
+ struct i2c_client *client = data->client;
+ int i;
+
+ for (i = 0; i < 6; i++) {
+ data->in_min[i] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_IN_MIN(i));
+ data->in_max[i] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_IN_MAX(i));
+ }
+ for (i = 0; i < 2; i++) {
+ data->fan_min[i] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_FAN_MIN(i));
+ }
+ for (i = 0; i < 2; i++) {
+ data->temp_max[i] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_TEMP_MAX(i));
+ }
+
+ /* read fan divs and 5-bit VID */
+ i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
+ data->fan_div[0] = (i >> 4) & 3;
+ data->fan_div[1] = (i >> 6) & 3;
+ data->vid = i & 0x0f;
+ data->vid |= (i2c_smbus_read_byte_data(client,
+ ADM9240_REG_VID4) & 1) << 4;
+ /* read analog out */
+ data->aout = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_ANALOG_OUT);
+
+ return 0;
+}
+
+static struct adm9240_data *adm9240_update_device(struct device *dev)
+{
+ struct adm9240_data *data = dev_get_drvdata(dev);
+ int err;
+
mutex_lock(&data->update_lock);

/* minimum measurement cycle: 1.75 seconds */
if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4))
|| !data->valid) {
-
- for (i = 0; i < 6; i++) { /* read voltages */
- data->in[i] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_IN(i));
- }
- data->alarms = i2c_smbus_read_byte_data(client,
- ADM9240_REG_INT(0)) |
- i2c_smbus_read_byte_data(client,
- ADM9240_REG_INT(1)) << 8;
-
- /*
- * read temperature: assume temperature changes less than
- * 0.5'C per two measurement cycles thus ignore possible
- * but unlikely aliasing error on lsb reading. --Grant
- */
- data->temp = (i2c_smbus_read_byte_data(client,
- ADM9240_REG_TEMP) << 8) |
- i2c_smbus_read_byte_data(client,
- ADM9240_REG_TEMP_CONF);
-
- for (i = 0; i < 2; i++) { /* read fans */
- data->fan[i] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_FAN(i));
-
- /* adjust fan clock divider on overflow */
- if (data->valid && data->fan[i] == 255 &&
- data->fan_div[i] < 3) {
-
- adm9240_write_fan_div(client, i,
- ++data->fan_div[i]);
-
- /* adjust fan_min if active, but not to 0 */
- if (data->fan_min[i] < 255 &&
- data->fan_min[i] >= 2)
- data->fan_min[i] /= 2;
- }
+ err = adm9240_update_measure(data);
+ if (err < 0) {
+ data->valid = 0;
+ mutex_unlock(&data->update_lock);
+ return ERR_PTR(err);
}
data->last_updated_measure = jiffies;
}
@@ -212,33 +259,12 @@ static struct adm9240_data *adm9240_update_device(struct device *dev)
/* minimum config reading cycle: 300 seconds */
if (time_after(jiffies, data->last_updated_config + (HZ * 300))
|| !data->valid) {
-
- for (i = 0; i < 6; i++) {
- data->in_min[i] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_IN_MIN(i));
- data->in_max[i] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_IN_MAX(i));
+ err = adm9240_update_config(data);
+ if (err < 0) {
+ data->valid = 0;
+ mutex_unlock(&data->update_lock);
+ return ERR_PTR(err);
}
- for (i = 0; i < 2; i++) {
- data->fan_min[i] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_FAN_MIN(i));
- }
- for (i = 0; i < 2; i++) {
- data->temp_max[i] = i2c_smbus_read_byte_data(client,
- ADM9240_REG_TEMP_MAX(i));
- }
-
- /* read fan divs and 5-bit VID */
- i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
- data->fan_div[0] = (i >> 4) & 3;
- data->fan_div[1] = (i >> 6) & 3;
- data->vid = i & 0x0f;
- data->vid |= (i2c_smbus_read_byte_data(client,
- ADM9240_REG_VID4) & 1) << 4;
- /* read analog out */
- data->aout = i2c_smbus_read_byte_data(client,
- ADM9240_REG_ANALOG_OUT);
-
data->last_updated_config = jiffies;
data->valid = 1;
}
@@ -253,6 +279,10 @@ static ssize_t temp1_input_show(struct device *dev,
struct device_attribute *dummy, char *buf)
{
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", data->temp / 128 * 500); /* 9-bit value */
}

@@ -261,6 +291,10 @@ static ssize_t max_show(struct device *dev, struct device_attribute *devattr,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", data->temp_max[attr->index] * 1000);
}

@@ -295,6 +329,10 @@ static ssize_t in_show(struct device *dev, struct device_attribute *devattr,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", IN_FROM_REG(data->in[attr->index],
attr->index));
}
@@ -304,6 +342,10 @@ static ssize_t in_min_show(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[attr->index],
attr->index));
}
@@ -313,6 +355,10 @@ static ssize_t in_max_show(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[attr->index],
attr->index));
}
@@ -386,6 +432,10 @@ static ssize_t fan_show(struct device *dev, struct device_attribute *devattr,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
1 << data->fan_div[attr->index]));
}
@@ -395,6 +445,10 @@ static ssize_t fan_min_show(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[attr->index],
1 << data->fan_div[attr->index]));
}
@@ -404,6 +458,10 @@ static ssize_t fan_div_show(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", 1 << data->fan_div[attr->index]);
}

@@ -490,6 +548,10 @@ static ssize_t alarms_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%u\n", data->alarms);
}
static DEVICE_ATTR_RO(alarms);
@@ -499,6 +561,10 @@ static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
{
int bitnr = to_sensor_dev_attr(attr)->index;
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
}
static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0);
@@ -516,6 +582,10 @@ static ssize_t cpu0_vid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
}
static DEVICE_ATTR_RO(cpu0_vid);
@@ -525,6 +595,10 @@ static ssize_t aout_output_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct adm9240_data *data = adm9240_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout));
}

--
2.28.0