[PATCH v6 01/35] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer

From: Dmitry Osipenko
Date: Mon Sep 07 2020 - 22:12:46 EST


The tegra_i2c_flush_fifos() shouldn't sleep in atomic transfer and jiffies
are not updating if interrupts are disabled. Let's switch to use iopoll
API helpers for register-polling. The iopoll API provides helpers for both
atomic and non-atomic cases.

Note that this patch doesn't fix any known problem because normally FIFO
is flushed at the time of starting a new transfer.

Reviewed-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
drivers/i2c/busses/i2c-tegra.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 00d3e4d7a01e..ab88cdd70376 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -470,9 +470,9 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)

static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
{
- unsigned long timeout = jiffies + HZ;
- unsigned int offset;
- u32 mask, val;
+ u32 mask, val, offset, reg_offset;
+ void __iomem *addr;
+ int err;

if (i2c_dev->hw->has_mst_fifo) {
mask = I2C_MST_FIFO_CONTROL_TX_FLUSH |
@@ -488,12 +488,19 @@ static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
val |= mask;
i2c_writel(i2c_dev, val, offset);

- while (i2c_readl(i2c_dev, offset) & mask) {
- if (time_after(jiffies, timeout)) {
- dev_warn(i2c_dev->dev, "timeout waiting for fifo flush\n");
- return -ETIMEDOUT;
- }
- usleep_range(1000, 2000);
+ reg_offset = tegra_i2c_reg_addr(i2c_dev, offset);
+ addr = i2c_dev->base + reg_offset;
+
+ if (i2c_dev->is_curr_atomic_xfer)
+ err = readl_relaxed_poll_timeout_atomic(addr, val, !(val & mask),
+ 1000, 1000000);
+ else
+ err = readl_relaxed_poll_timeout(addr, val, !(val & mask),
+ 1000, 1000000);
+
+ if (err) {
+ dev_err(i2c_dev->dev, "failed to flush FIFO\n");
+ return err;
}
return 0;
}
--
2.27.0