[PATCH 17/25] ARM: dts: s5pv210: use defines for GPIO flags in Goni

From: Krzysztof Kozlowski
Date: Mon Sep 07 2020 - 12:21:54 EST


Replace hard-coded flags with defines for readability. No functional
change.

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm/boot/dts/s5pv210-goni.dts | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index c8714bf0b6e4..77d1c5144afd 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -11,6 +11,7 @@
*/

/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "s5pv210.dtsi"

@@ -51,7 +52,7 @@
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
reg = <0>;
- gpio = <&mp05 4 0>;
+ gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};

@@ -77,15 +78,15 @@
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
reg = <3>;
- gpio = <&gpj1 3 0>;
+ gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};

i2c_pmic: i2c-pmic {
compatible = "i2c-gpio";
- gpios = <&gpj4 0 0>, /* sda */
- <&gpj4 3 0>; /* scl */
+ gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>, /* sda */
+ <&gpj4 3 GPIO_ACTIVE_HIGH>; /* scl */
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
@@ -95,13 +96,13 @@
reg = <0x66>;

max8998,pmic-buck1-default-dvs-idx = <0>;
- max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
- <&gph0 4 0>;
+ max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+ <&gph0 4 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
<1200000>, <1200000>;

max8998,pmic-buck2-default-dvs-idx = <0>;
- max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+ max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;

regulators {
@@ -395,8 +396,8 @@
clock-frequency = <16000000>;
clocks = <&camera 0>;
clock-names = "mclk";
- nreset-gpios = <&gpb 2 0>;
- nstby-gpios = <&gpb 0 0>;
+ nreset-gpios = <&gpb 2 GPIO_ACTIVE_HIGH>;
+ nstby-gpios = <&gpb 0 GPIO_ACTIVE_HIGH>;

port {
noon010pc30_ep: endpoint {
--
2.17.1