Re: [PATCH v3 12/14] dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs

From: Rob Herring
Date: Fri Sep 04 2020 - 18:36:54 EST


On Fri, Sep 4, 2020 at 9:25 AM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> Driver requires different amount of clocks for different SoCs. Describe
> these requirements properly to fix dtbs_check warnings like:
>
> arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml: nand-controller@33002000: clock-names:1: 'gpmi_apb' was expected
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>
> ---
>
> Changes since v1:
> 1. Do not require order of clocks (use pattern).

To the extent that you can, you should fix the order in dts files
first. If we just adjust the schemas to match the dts files, then
what's the point?

> ---
> .../devicetree/bindings/mtd/gpmi-nand.yaml | 76 +++++++++++++++----
> 1 file changed, 61 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
> index 28ff8c581837..e08e0a50929e 100644
> --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
> +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
> @@ -9,9 +9,6 @@ title: Freescale General-Purpose Media Interface (GPMI) binding
> maintainers:
> - Han Xu <han.xu@xxxxxxx>
>
> -allOf:
> - - $ref: "nand-controller.yaml"
> -
> description: |
> The GPMI nand controller provides an interface to control the NAND
> flash chips. The device tree may optionally contain sub-nodes
> @@ -58,22 +55,10 @@ properties:
> clocks:
> minItems: 1
> maxItems: 5
> - items:
> - - description: SoC gpmi io clock
> - - description: SoC gpmi apb clock
> - - description: SoC gpmi bch clock
> - - description: SoC gpmi bch apb clock
> - - description: SoC per1 bch clock
>
> clock-names:
> minItems: 1
> maxItems: 5
> - items:
> - - const: gpmi_io
> - - const: gpmi_apb
> - - const: gpmi_bch
> - - const: gpmi_bch_apb
> - - const: per1_bch
>
> fsl,use-minimum-ecc:
> type: boolean
> @@ -107,6 +92,67 @@ required:
>
> unevaluatedProperties: false
>
> +allOf:
> + - $ref: "nand-controller.yaml"
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx23-gpmi-nand
> + - fsl,imx28-gpmi-nand
> + then:
> + properties:
> + clocks:
> + items:
> + - description: SoC gpmi io clock
> + clock-names:
> + items:
> + - const: gpmi_io
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx6q-gpmi-nand
> + - fsl,imx6sx-gpmi-nand
> + then:
> + properties:
> + clocks:
> + items:
> + - description: SoC gpmi io clock
> + - description: SoC gpmi apb clock
> + - description: SoC gpmi bch clock
> + - description: SoC gpmi bch apb clock
> + - description: SoC per1 bch clock
> + clock-names:
> + items:
> + - pattern: "^(gpmi_(io|apb|bch|bch_apb)|per1_bch)$"
> + - pattern: "^(gpmi_(io|apb|bch|bch_apb)|per1_bch)$"
> + - pattern: "^(gpmi_(io|apb|bch|bch_apb)|per1_bch)$"
> + - pattern: "^(gpmi_(io|apb|bch|bch_apb)|per1_bch)$"
> + - pattern: "^(gpmi_(io|apb|bch|bch_apb)|per1_bch)$"

BTW, you can make 'items' a schema rather than a list to apply a
constraint to all entries:

maxItems: 5
items:
pattern: "^(gpmi_(io|apb|bch|bch_apb)|per1_bch)$"

> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: fsl,imx7d-gpmi-nand
> + then:
> + properties:
> + clocks:
> + items:
> + - description: SoC gpmi io clock
> + - description: SoC gpmi bch apb clock
> + clock-names:
> + minItems: 2
> + maxItems: 2

You can drop these. It's the default based on the size of 'items'.

> + items:
> + - pattern: "^gpmi_(io|bch_apb)$"
> + - pattern: "^gpmi_(io|bch_apb)$"

Surely here we can define the order.

> +
> examples:
> - |
> nand-controller@8000c000 {
> --
> 2.17.1
>