Re: [PATCH v2 1/1] edac: fsl_ddr_edac: fix expected data message

From: Gregor Herburger
Date: Fri Sep 04 2020 - 09:45:14 EST


On Fri, Sep 04, 2020 at 11:17:18AM +0200, Borislav Petkov wrote:
> Your mail client broke threading...
>
Indeed. Guess I have to change the mail client. Sorry for that.
> On Fri, Sep 04, 2020 at 06:52:24AM +0000, Gregor Herburger wrote:
>
> > The cap_low, cap_high and syndrome are used in the printk following the if-Block.
> > This will make expected data / captured data look the same.
>
> Right.
>
> > @@ -334,18 +337,32 @@ static void fsl_mc_check(struct mem_ctl_info *mci)
> >                 sbe_ecc_decode(cap_high, cap_low, syndrome,
> >                                 &bad_data_bit, &bad_ecc_bit);
> >
> > +               exp_high = cap_high;
> > +               exp_low = cap_low;
> > +               exp_syndrome = syndrome;
> > +
> >                 if (bad_data_bit != -1)
> > +               {
>
> Opening brace is on the same line for if-statements.
>
> >                         fsl_mc_printk(mci, KERN_ERR,
> >                                 "Faulty Data bit: %d\n", bad_data_bit);
> > +
> > +                       if (bad_data_bit < 32)
> > +                               exp_low = cap_low ^ (1 << bad_data_bit);
> > +                       else
> > +                               exp_high = cap_high ^ (1 << (bad_data_bit - 32));
> > +               }
> > +
> >                 if (bad_ecc_bit != -1)
> > +               {
>
> Ditto.
>
> >                         fsl_mc_printk(mci, KERN_ERR,
> >                                 "Faulty ECC bit: %d\n", bad_ecc_bit);
> >
> > +                       exp_syndrome = syndrome ^ (1 << bad_ecc_bit);
> > +               }
> > +
> >                 fsl_mc_printk(mci, KERN_ERR,
> >                         "Expected Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
> > -                       cap_high ^ (1 << (bad_data_bit - 32)),
> > -                       cap_low ^ (1 << bad_data_bit),
> > -                       syndrome ^ (1 << bad_ecc_bit));
> > +                       exp_high, exp_low, exp_syndrome);
> >         }
> >
> >           fsl_mc_printk(mci, KERN_ERR,
> >                           "Captured Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
> >                           cap_high, cap_low, syndrome);
> >
> > How about something like this?
>
> My only concern here is that you'll be printing "Expected Data ..."
> unconditionally even if either or both - bad_data_bit and bad_ecc_bit
> - are -1.
That shouldn't happen. The whole if-block is only executed when a single
bit correctable error has occured (DDR_EDE_SBE). So we always should have
bad_data_bit or bad_ecc_bit (exclusively).

>
> If the driver cannot decode the data and/or ECC syndrome bits, then it
> should say so - not dump expected data and claim that it is a valid
> information.
>
Ok, that is reaonable. But that shouldn't that go into sbe_ecc_decode()?.
Currently sbe_ecc_decude() returns on the first error it finds. So we would
have to rework this function.

> So maybe in addition to the above:
>
> if (bad_data_bit != -1) {
> ...
> } else {
> fsl_mc_printk(..., "Unable to decode the Faulty Data bit");
> }
>
> and the same for the ECC bit.
>
I suggest adding such an message to sbe_ecc_decode(). Also to add an
return 0 on success and to check that before printing infos about single
bit errors.

> And then print only the expected data for the bit which sbe_ecc_decode()
> found correctly and not say anything otherwise.
>
Also i just noticed in the kernel log is no hint that this is an
single bit error. Maybe we should add this too?