[PATCH] regulator: pwm: Fix machine constraints application

[Vincent Whitchurch]

If the zero duty cycle doesn't correspond to any voltage in the voltage
table, the PWM regulator returns an -EINVAL from get_voltage_sel() which
results in the core erroring out with a "failed to get the current
voltage" and ending up not applying the machine constraints.

Instead, return -ENOTRECOVERABLE which makes the core set the voltage
since it's at an unknown value.

For example, with this device tree:

	fooregulator {
		compatible = "pwm-regulator";
		pwms = <&foopwm 0 100000>;
		regulator-min-microvolt = <2250000>;
		regulator-max-microvolt = <2250000>;
		regulator-name = "fooregulator";
		regulator-always-on;
		regulator-boot-on;
		voltage-table = <2250000 30>;
	};

Before this patch:

  fooregulator: failed to get the current voltage(-22)

After this patch:

  fooregulator: Setting 2250000-2250000uV
  fooregulator: 2250 mV

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
---
 drivers/regulator/pwm-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 3234b118b53e..990bd50771d8 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -279,7 +279,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
 		return ret;
 	}
 
-	drvdata->state			= -EINVAL;
+	drvdata->state			= -ENOTRECOVERABLE;
 	drvdata->duty_cycle_table	= duty_cycle_table;
 	drvdata->desc.ops = &pwm_regulator_voltage_table_ops;
 	drvdata->desc.n_voltages	= length / sizeof(*duty_cycle_table);
-- 
2.28.0