Re: [PATCH] clk: meson: g12a: mark fclk_div2 as critical

[Anand Moon]

Hi Stefan,

On Fri, 28 Aug 2020 at 03:14, Stefan Agner <stefan@xxxxxxxx> wrote:
>
> On Amlogic Meson G12b platform, similar to fclk_div3, the fclk_div2
> seems to be necessary for the system to operate correctly as well.
>
> Typically, the clock also gets chosen by the eMMC peripheral. This
> probably masked the problem so far. However, when booting from a SD
> card the clock seems to get disabled which leads to a system freeze.
>
> Let's mark this clock as critical, fixing boot from SD card on G12b
> platforms.
>
> Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
> ---

Thank you for this patch. I reported this a long time ago but could
not solve it.
Please add my
Tested-by: Anand Moon <linux.amoon@xxxxxxxxx>



>  drivers/clk/meson/g12a.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
> index fad616cac01e..2214b974f748 100644
> --- a/drivers/clk/meson/g12a.c
> +++ b/drivers/clk/meson/g12a.c
> @@ -298,6 +298,7 @@ static struct clk_regmap g12a_fclk_div2 = {
>                         &g12a_fclk_div2_div.hw
>                 },
>                 .num_parents = 1,
> +               .flags = CLK_IS_CRITICAL,
>         },
>  };
>
> --
> 2.28.0
>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-amlogic