Re: [PATCH v7 3/3] ARM: dts: stm32: add initial support for stm32mp157-odyssey board

[Alexandre Torgue]

Hi Marcin,

On 8/9/20 6:44 PM, Marcin Sloniewski wrote:
> Add support for Seeed Studio's stm32mp157c odyssey board.
> Board consists of SoM with stm32mp157c with 4GB eMMC and 512 MB DDR3 RAM
> and carrier board with USB and ETH interfaces, SD card connector,
> wifi and BT chip AP6236.
>
> In this patch only basic kernel boot is supported and interfacing
> SD card and on-board eMMC.
>
> Signed-off-by: Marcin Sloniewski <marcin.sloniewski@xxxxxxxxx>
> ---

Series applied on stm32-next.

Regards
Alex