Re: [PATCH 1/3] dt-bindings: Add support for Broadcom USB pin map driver

From: Rob Herring
Date: Mon Aug 24 2020 - 19:30:48 EST


On Wed, Aug 12, 2020 at 04:20:16PM -0400, Al Cooper wrote:
> Add DT bindings for the Broadcom USB pin map driver. This driver allows
> some USB input and output signals to be mapped to any GPIO instead
> of the normal dedicated pins to/from the XHCI controller.

Is this a driver or h/w block because bindings are for h/w blocks?

>
> Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
> ---
> .../bindings/usb/brcm,usb-pinmap.yaml | 63 +++++++++++++++++++
> 1 file changed, 63 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
> new file mode 100644
> index 000000000000..19cf6ad36373
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/brcm,usb-pinmap.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom USB pin map Controller Device Tree Bindings
> +
> +maintainers:
> + - Al Cooper <alcooperx@xxxxxxxxx>
> +
> +properties:
> + compatible:
> + items:
> + - const: brcm,usb-pinmap

2 space indentation please.

> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> + description: Must be defined if any out-gpios are specified.

'dependencies' can express this in schema.

> +
> + in-gpios:
> + description: Array of one or more GPIO pins used for input signals.

You need to define how many GPIOs are valid.

> +
> + in-names:
> + description: Array of input signal names, one per gpio in in-gpios.

No, this isn't how we name GPIOs. The part before '-gpios' is how.

> +
> + in-masks:
> + description: Array of enable and mask pairs, one per gpio in-gpios.

Needs a vendor prefix.

> +
> + out-gpios:
> + description: Array of one or more GPIO pins used for output signals.
> +
> + out-names:
> + description: Array of output signal names, one per gpio in out-gpios.
> +
> + out-masks:
> + description: Array of enable, value, changed and clear masks, one
> + per gpio in out-gpios.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + usb_pinmap: usb-pinmap@22000d0 {
> + compatible = "brcm,usb-pinmap";
> + reg = <0x22000d0 0x4>;
> + in-gpios = <&gpio 18 0>, <&gpio 19 0>;
> + in-names = "VBUS", "PWRFLT";
> + in-masks = <0x8000 0x40000 0x10000 0x80000>;
> + out-gpios = <&gpio 20 0>;
> + out-names = "PWRON";
> + out-masks = <0x20000 0x800000 0x400000 0x200000>;
> + interrupts = <0x0 0xb2 0x4>;
> + };
> +
> +...
> --
> 2.17.1
>