[PATCH] drivers: staging: comedi: fixed duplicate words from checkpatch

From: Ethan Edwards
Date: Sat Aug 22 2020 - 16:22:53 EST


Fixed various different checkpatch duplicate word warnings, the TODO
file said to fix checkpatch warnings.

My old email didn't CC the mailing lists, ignore the old one, sorry.

Signed-off-by: Ethan Edwards <ethancarteredwards@xxxxxxxxx>
---
drivers/staging/comedi/comedi.h | 4 ++--
drivers/staging/comedi/comedidev.h | 2 +-
drivers/staging/comedi/drivers/addi_apci_1564.c | 4 ++--
drivers/staging/comedi/drivers/comedi_8255.c | 2 +-
drivers/staging/comedi/drivers/ni_tiocmd.c | 2 +-
drivers/staging/comedi/drivers/pcmuio.c | 2 +-
drivers/staging/comedi/drivers/quatech_daqp_cs.c | 2 +-
7 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h
index 09a940066c0e..b5d00a006dbb 100644
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@@ -680,7 +680,7 @@ struct comedi_rangeinfo {
* value of 1 volt.
*
* The only defined flag value is %RF_EXTERNAL (%0x100), indicating that the
- * the range needs to be multiplied by an external reference.
+ * range needs to be multiplied by an external reference.
*/
struct comedi_krange {
int min;
@@ -970,7 +970,7 @@ enum i8254_mode {
* major reasons exist why this caused major confusion for users:
* 1) The register values are _NOT_ in user documentation, but rather in
* arcane locations, such as a few register programming manuals that are
- * increasingly hard to find and the NI MHDDK (comments in in example code).
+ * increasingly hard to find and the NI MHDDK (comments in example code).
* There is no one place to find the various valid values of the registers.
* 2) The register values are _NOT_ completely consistent. There is no way to
* gain any sense of intuition of which values, or even enums one should use
diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index 0dff1ac057cd..0e1b95ef9a4d 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -627,7 +627,7 @@ extern const struct comedi_lrange range_unknown;
* @range: Array of &struct comedi_krange, one for each range.
*
* Each element of @range[] describes the minimum and maximum physical range
- * range and the type of units. Typically, the type of unit is %UNIT_volt
+ * and the type of units. Typically, the type of unit is %UNIT_volt
* (i.e. volts) and the minimum and maximum are in millionths of a volt.
* There may also be a flag that indicates the minimum and maximum are merely
* scale factors for an unknown, external reference.
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index fadefcb5c237..06fc7ed96200 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -544,7 +544,7 @@ static int apci1564_timer_insn_write(struct comedi_device *dev,
{
struct apci1564_private *devpriv = dev->private;

- /* just write the last last to the reload register */
+ /* just write the last to the reload register */
if (insn->n) {
unsigned int val = data[insn->n - 1];

@@ -628,7 +628,7 @@ static int apci1564_counter_insn_write(struct comedi_device *dev,
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned long iobase = devpriv->counters + APCI1564_COUNTER(chan);

- /* just write the last last to the reload register */
+ /* just write the last to the reload register */
if (insn->n) {
unsigned int val = data[insn->n - 1];

diff --git a/drivers/staging/comedi/drivers/comedi_8255.c b/drivers/staging/comedi/drivers/comedi_8255.c
index 3298725b9ba5..b7ca465933ee 100644
--- a/drivers/staging/comedi/drivers/comedi_8255.c
+++ b/drivers/staging/comedi/drivers/comedi_8255.c
@@ -248,7 +248,7 @@ EXPORT_SYMBOL_GPL(subdev_8255_mm_init);
* subdev_8255_regbase - get offset of 8255 registers or call-back context
* @s: comedi subdevice
*
- * Returns the 'regbase' parameter that was previously passed to to
+ * Returns the 'regbase' parameter that was previously passed to
* subdev_8255_init() or subdev_8255_mm_init() to set up the subdevice.
* Only valid if the subdevice was set up successfully.
*/
diff --git a/drivers/staging/comedi/drivers/ni_tiocmd.c b/drivers/staging/comedi/drivers/ni_tiocmd.c
index 2a9f7e9821a7..ab6d9e8269f3 100644
--- a/drivers/staging/comedi/drivers/ni_tiocmd.c
+++ b/drivers/staging/comedi/drivers/ni_tiocmd.c
@@ -286,7 +286,7 @@ int ni_tio_cmdtest(struct comedi_device *dev,
* This should be done, but we don't yet know the actual
* register values. These should be tested and then documented
* in the ni_route_values/ni_*.csv files, with indication of
- * who/when/which/how these these were tested.
+ * who/when/which/how these were tested.
* When at least a e/m/660x series have been tested, this code
* should be uncommented:
*
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 7e1fc6ffb48c..b299d648a0eb 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -48,7 +48,7 @@
*
* In the 48-channel version:
*
- * On subdev 0, the first 24 channels channels are edge-detect channels.
+ * On subdev 0, the first 24 channels are edge-detect channels.
*
* In the 96-channel board you have the following channels that can do edge
* detection:
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 1b1efa4d31f6..fe4408ebf6b3 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -164,7 +164,7 @@ static int daqp_clear_events(struct comedi_device *dev, int loops)

/*
* Reset any pending interrupts (my card has a tendency to require
- * require multiple reads on the status register to achieve this).
+ * multiple reads on the status register to achieve this).
*/
while (--loops) {
status = inb(dev->iobase + DAQP_STATUS_REG);
--
2.28.0