Re: [PATCH 2/5] Add manpages for move_mount(2) and open_tree(2)

From: Michael Kerrisk (man-pages)
Date: Sat Aug 22 2020 - 16:04:17 EST

Next message: Liam Beguin: "Re: [PATCH v3 1/1] phy: tusb1210: use bitmasks to set VENDOR_SPECIFIC2"
Previous message: Michael Kerrisk (man-pages): "Re: [PATCH 1/5] Add manpage for open_tree(2)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello David,

On Fri, 7 Aug 2020 at 16:02, David Howells <dhowells@xxxxxxxxxx> wrote:
>
> Add manual pages to document the move_mount and open_tree() system calls.

Notwithstanding the title and the commit message, this patch documents
just move_mount(). Could you revise the title and commit message for
the next iteration please.

> Signed-off-by: David Howells <dhowells@xxxxxxxxxx>
> ---
>
> man2/move_mount.2 | 275 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 275 insertions(+)
> create mode 100644 man2/move_mount.2
>
> diff --git a/man2/move_mount.2 b/man2/move_mount.2
> new file mode 100644
> index 000000000..aae9013fa
> --- /dev/null
> +++ b/man2/move_mount.2
> @@ -0,0 +1,275 @@
> +'\" t
> +.\" Copyright (c) 2020 David Howells <dhowells@xxxxxxxxxx>
> +.\"
> +.\" %%%LICENSE_START(VERBATIM)
> +.\" Permission is granted to make and distribute verbatim copies of this
> +.\" manual provided the copyright notice and this permission notice are
> +.\" preserved on all copies.
> +.\"
> +.\" Permission is granted to copy and distribute modified versions of this
> +.\" manual under the conditions for verbatim copying, provided that the
> +.\" entire resulting derived work is distributed under the terms of a
> +.\" permission notice identical to this one.
> +.\"
> +.\" Since the Linux kernel and libraries are constantly changing, this
> +.\" manual page may be incorrect or out-of-date. The author(s) assume no
> +.\" responsibility for errors or omissions, or for damages resulting from
> +.\" the use of the information contained herein. The author(s) may not
> +.\" have taken the same level of care in the production of this manual,
> +.\" which is licensed free of charge, as they might when working
> +.\" professionally.
> +.\"
> +.\" Formatted or processed versions of this manual, if unaccompanied by
> +.\" the source, must acknowledge the copyright and authors of this work.
> +.\" %%%LICENSE_END
> +.\"
> +.TH MOVE_MOUNT 2 2020-08-07 "Linux" "Linux Programmer's Manual"
> +.SH NAME
> +move_mount \- Move mount objects around the filesystem topology
> +.SH SYNOPSIS
> +.nf
> +.B #include <sys/types.h>
> +.br

Delete the previous line (".br), and the same below (twice).

> +.B #include <sys/mount.h>
> +.br

> +.B #include <unistd.h>
> +.br
> +.BR "#include <fcntl.h> " "/* Definition of AT_* constants */"
> +.PP
> +.BI "int move_mount(int " from_dirfd ", const char *" from_pathname ","
> +.BI " int " to_dirfd ", const char *" to_pathname ","
> +.BI " unsigned int " flags );
> +.fi
> +.PP
> +.IR Note :
> +There is no glibc wrapper for this system call.
> +.SH DESCRIPTION
> +The
> +.BR move_mount ()
> +call moves a mount from one place to another; it can also be used to attach an
> +unattached mount created by

s/created/previously created/ ?

> +.BR fsmount "() or " open_tree "() with " OPEN_TREE_CLONE .
> +.PP
> +If
> +.BR move_mount ()
> +is called repeatedly with a file descriptor that refers to a mount object,
> +then the object will be attached/moved the first time and then moved again and
> +again and again, detaching it from the previous mountpoint each time.

s/again and again and again/repeatedly/

s/mountpoint/mount point/

> +.PP
> +To access the source mount object or the destination mountpoint, no
> +permissions are required on the object itself, but if either pathname is
> +supplied, execute (search) permission is required on all of the directories
> +specified in
> +.IR from_pathname " or " to_pathname .
> +.PP
> +The caller does, however, require the appropriate capabilities or permission
> +to effect a mount.

Maybe better: s/effect/create/

> +.PP
> +.BR move_mount ()
> +uses
> +.IR from_pathname ", " from_dirfd " and part of " flags
> +to locate the mount object to be moved and
> +.IR to_pathname ", " to_dirfd " and another part of " flags
> +to locate the destination mountpoint. Each lookup can be done in one of a
> +variety of ways:
> +.TP
> +[*] By absolute path.
> +The pathname points to an absolute path and the dirfd is ignored. The file is
> +looked up by name, starting from the root of the filesystem as seen by the
> +calling process.
> +.TP
> +[*] By cwd-relative path.
> +The pathname points to a relative path and the dirfd is
> +.IR AT_FDCWD .
> +The file is looked up by name, starting from the current working directory.
> +.TP
> +[*] By dir-relative path.
> +The pathname points to relative path and the dirfd indicates a file descriptor
> +pointing to a directory. The file is looked up by name, starting from the
> +directory specified by
> +.IR dirfd .
> +.TP
> +[*] By file descriptor.
> +The pathname points to "", the dirfd points directly to the mount object to

Better: The pathname is an empty string ("")

> +move or the destination mount point and the appropriate
> +.B *_EMPTY_PATH
> +flag is set.
> +.PP
> +.I flags
> +can be used to influence a path-based lookup. A value for

s/A value/The value/

> +.I flags
> +is constructed by OR'ing together zero or more of the following constants:
> +.TP
> +.BR MOVE_MOUNT_F_EMPTY_PATH
> +.\" commit 65cfc6722361570bfe255698d9cd4dccaf47570d
> +If
> +.I from_pathname
> +is an empty string, operate on the file referred to by
> +.IR from_dirfd
> +(which may have been obtained using the
> +.BR open (2)
> +.B O_PATH
> +flag or
> +.BR open_tree ())
> +If
> +.I from_dirfd
> +is
> +.BR AT_FDCWD ,
> +the call operates on the current working directory.
> +In this case,
> +.I from_dirfd
> +can refer to any type of file, not just a directory.
> +This flag is Linux-specific; define
> +.B _GNU_SOURCE
> +.\" Before glibc 2.16, defining _ATFILE_SOURCE sufficed
> +to obtain its definition.
> +.TP
> +.B MOVE_MOUNT_T_EMPTY_PATH
> +As above, but operating on
> +.IR to_pathname " and " to_dirfd .
> +.TP
> +.B MOVE_MOUNT_F_NO_AUTOMOUNT

As noted by Karel in
https://lore.kernel.org/lkml/20191202115540.gx2dcimzns7osbra@10.255.255.10/
there is no MOVE_MOUNT_F_NO_AUTOMOUNT, but rather
MOVE_MOUNT_F_AUTOMOUNTS. Could you revise accordingly please.

> +Don't automount the terminal ("basename") component of
> +.I from_pathname
> +if it is a directory that is an automount point. This allows a mount object
> +that has an automount point at its root to be moved and prevents unintended
> +triggering of an automount point.
> +The
> +.B MOVE_MOUNT_F_NO_AUTOMOUNT
> +flag has no effect if the automount point has already been mounted over. This
> +flag is Linux-specific; define
> +.B _GNU_SOURCE
> +.\" Before glibc 2.16, defining _ATFILE_SOURCE sufficed
> +to obtain its definition.
> +.TP
> +.B MOVE_MOUNT_T_NO_AUTOMOUNT

As noted by Karel in
https://lore.kernel.org/lkml/20191202115540.gx2dcimzns7osbra@10.255.255.10/
there is no MOVE_MOUNT_T_NO_AUTOMOUNT, but rather
MOVE_MOUNT_T_AUTOMOUNTS. Could you revise accordingly please.

> +As above, but operating on
> +.IR to_pathname " and " to_dirfd .
> +This allows an automount point to be manually mounted over.
> +.TP
> +.B MOVE_MOUNT_F_SYMLINKS
> +If
> +.I from_pathname
> +is a symbolic link, then dereference it. The default for
> +.BR move_mount ()
> +is to not follow symlinks.
> +.TP
> +.B MOVE_MOUNT_T_SYMLINKS
> +As above, but operating on
> +.IR to_pathname " and " to_dirfd .
> +
> +.SH EXAMPLES
> +The
> +.BR move_mount ()
> +function can be used like the following:
> +.PP
> +.RS
> +.nf
> +move_mount(AT_FDCWD, "/a", AT_FDCWD, "/b", 0);
> +.fi
> +.RE
> +.PP
> +This would move the object mounted on "/a" to "/b". It can also be used in
> +conjunction with
> +.BR open_tree "(2) or " open "(2) with " O_PATH :
> +.PP
> +.RS
> +.nf
> +fd = open_tree(AT_FDCWD, "/mnt", 0);
> +move_mount(fd, "", AT_FDCWD, "/mnt2", MOVE_MOUNT_F_EMPTY_PATH);
> +move_mount(fd, "", AT_FDCWD, "/mnt3", MOVE_MOUNT_F_EMPTY_PATH);
> +move_mount(fd, "", AT_FDCWD, "/mnt4", MOVE_MOUNT_F_EMPTY_PATH);
> +.fi
> +.RE
> +.PP
> +This would attach the path point for "/mnt" to fd, then it would move the
> +mount to "/mnt2", then move it to "/mnt3" and finally to "/mnt4".
> +.PP
> +It can also be used to attach new mounts:
> +.PP
> +.RS
> +.nf
> +sfd = fsopen("ext4", FSOPEN_CLOEXEC);
> +fsconfig(sfd, FSCONFIG_SET_STRING, "source", "/dev/sda1", 0);
> +fsconfig(sfd, FSCONFIG_SET_FLAG, "user_xattr", NULL, 0);
> +fsconfig(sfd, FSCONFIG_CMD_CREATE, NULL, NULL, 0);
> +mfd = fsmount(sfd, FSMOUNT_CLOEXEC, MOUNT_ATTR_NODEV);
> +move_mount(mfd, "", AT_FDCWD, "/home", MOVE_MOUNT_F_EMPTY_PATH);
> +.fi
> +.RE
> +.PP
> +Which would open the Ext4 filesystem mounted on "/dev/sda1", turn on user
> +extended attribute support and create a mount object for it. Finally, the new
> +mount object would be attached with
> +.BR move_mount ()
> +to "/home".
> +
> +

Manual page source should in general never contain blank lines; these
can cause odd renderings in various formats (e.g., PDF). Could you
please fix this in all pages.

> +.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> +.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> +.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

Lines like the above are rather clutter in the page source. I prefer
not to have them. Could you remove in all pages please.

> +.SH RETURN VALUE
> +On success, 0 is returned. On error, \-1 is returned, and
> +.I errno
> +is set appropriately.
> +.SH ERRORS
> +.TP
> +.B EACCES
> +Search permission is denied for one of the directories
> +in the path prefix of
> +.IR pathname .
> +(See also
> +.BR path_resolution (7).)
> +.TP
> +.B EBADF
> +.IR from_dirfd " or " to_dirfd
> +is not a valid open file descriptor.
> +.TP
> +.B EFAULT
> +.IR from_pathname " or " to_pathname
> +is NULL or either one point to a location outside the process's accessible
> +address space.
> +.TP
> +.B EINVAL
> +Reserved flag specified in
> +.IR flags .
> +.TP
> +.B ELOOP
> +Too many symbolic links encountered while traversing the pathname.
> +.TP
> +.B ENAMETOOLONG
> +.IR from_pathname " or " to_pathname
> +is too long.
> +.TP
> +.B ENOENT
> +A component of
> +.IR from_pathname " or " to_pathname
> +does not exist, or one is an empty string and the appropriate
> +.B *_EMPTY_PATH
> +was not specified in
> +.IR flags .
> +.TP
> +.B ENOMEM
> +Out of memory (i.e., kernel memory).
> +.TP
> +.B ENOTDIR
> +A component of the path prefix of
> +.IR from_pathname " or " to_pathname
> +is not a directory or one or the other is relative and the appropriate
> +.I *_dirfd
> +is a file descriptor referring to a file other than a directory.
> +.SH VERSIONS
> +.BR move_mount ()
> +was added to Linux in kernel 4.18.

The version number here is wrong. It's 5.2. I presume this needs to be
fixed in all of the other pages.

> +.SH CONFORMING TO
> +.BR move_mount ()
> +is Linux-specific.
> +.SH NOTES
> +Glibc does not (yet) provide a wrapper for the
> +.BR move_mount ()
> +system call; call it using
> +.BR syscall (2).

By the way, do you know if anything is happening for the system calls
on the glibc side?

> +.SH SEE ALSO
> +.BR fsmount (2),
> +.BR fsopen (2),
> +.BR open_tree (2)

Thanks,

Michael

--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/

Next message: Liam Beguin: "Re: [PATCH v3 1/1] phy: tusb1210: use bitmasks to set VENDOR_SPECIFIC2"
Previous message: Michael Kerrisk (man-pages): "Re: [PATCH 1/5] Add manpage for open_tree(2)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]