[PATCH v3 0/4] regulator: mp886x: two features and dt json convert

[Jisheng Zhang]

This is to improve the mp886x regulator driver support.
patch1 implments .set_ramp_delay
patch2 and patch3 support the switch freq setting
patch4 converts dt binding to json-schema

Since v2:
 - Use mps,switch-frequency-hz instead of mps,switch-frequency
 - Add "maxItems: 2" to "mps,fb-voltage-divider" in dt-binding
 - Add a $ref to regulator.yaml in dt-binding

Since v1:
 - put any schema conversions at the end of the series as Mark
   suggested.

Jisheng Zhang (4):
  regulator: mp886x: implement set_ramp_delay
  dt-bindings: regulator: mp886x: support mps,switch-frequency-hz
  regulator: mp886x: support setting switch freq
  dt-bindings: regulator: Convert mp886x to json-schema

 .../devicetree/bindings/regulator/mp886x.txt  |  27 -----
 .../bindings/regulator/mps,mp886x.yaml        |  61 ++++++++++
 drivers/regulator/mp886x.c                    | 109 +++++++++++++++++-
 3 files changed, 167 insertions(+), 30 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml

-- 
2.28.0