[PATCH] dt-bindings: convert spmi.txt to spmi.yaml

From: Mauro Carvalho Chehab
Date: Wed Aug 19 2020 - 11:20:22 EST


Convert the SPMI bus documentation to JSON/yaml.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---

Rob,

As promissed, this patch converts the spmi.txt generic bus bindings to
html.

.../bindings/mfd/qcom,spmi-pmic.txt | 2 +-
.../bindings/spmi/qcom,spmi-pmic-arb.txt | 4 +-
.../devicetree/bindings/spmi/spmi.txt | 41 ------------
.../devicetree/bindings/spmi/spmi.yaml | 62 +++++++++++++++++++
4 files changed, 65 insertions(+), 44 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spmi/spmi.txt
create mode 100644 Documentation/devicetree/bindings/spmi/spmi.yaml

diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
index fffc8fde3302..79367a43b27d 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
@@ -37,7 +37,7 @@ Required properties:
or generalized "qcom,spmi-pmic".
- reg: Specifies the SPMI USID slave address for this device.
For more information see:
- Documentation/devicetree/bindings/spmi/spmi.txt
+ Documentation/devicetree/bindings/spmi/spmi.yaml

Required properties for peripheral child nodes:
- compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name.
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
index e16b9b5afc70..ca645e21fe47 100644
--- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
@@ -7,8 +7,8 @@ devices to control a single SPMI master.
The PMIC Arbiter can also act as an interrupt controller, providing interrupts
to slave devices.

-See spmi.txt for the generic SPMI controller binding requirements for child
-nodes.
+See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI
+controller binding requirements for child nodes.

See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
generic interrupt controller binding documentation.
diff --git a/Documentation/devicetree/bindings/spmi/spmi.txt b/Documentation/devicetree/bindings/spmi/spmi.txt
deleted file mode 100644
index 4bb10d161a27..000000000000
--- a/Documentation/devicetree/bindings/spmi/spmi.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-System Power Management Interface (SPMI) Controller
-
-This document defines a generic set of bindings for use by SPMI controllers. A
-controller is modelled in device tree as a node with zero or more child nodes,
-each representing a unique slave on the bus.
-
-Required properties:
-- #address-cells : must be set to 2
-- #size-cells : must be set to 0
-
-Child nodes:
-
-An SPMI controller node can contain zero or more child nodes representing slave
-devices on the bus. Child 'reg' properties are specified as an address, type
-pair. The address must be in the range 0-15 (4 bits). The type must be one of
-SPMI_USID (0) or SPMI_GSID (1) for Unique Slave ID or Group Slave ID respectively.
-These are the identifiers "statically assigned by the system integrator", as
-per the SPMI spec.
-
-Each child node must have one and only one 'reg' entry of type SPMI_USID.
-
-#include <dt-bindings/spmi/spmi.h>
-
- spmi@.. {
- compatible = "...";
- reg = <...>;
-
- #address-cells = <2>;
- #size-cells = <0>;
-
- child@0 {
- compatible = "...";
- reg = <0 SPMI_USID>;
- };
-
- child@7 {
- compatible = "...";
- reg = <7 SPMI_USID
- 3 SPMI_GSID>;
- };
- };
diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml
new file mode 100644
index 000000000000..8d72796b9bec
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/spmi.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/spmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Power Management Interface (SPMI) Controller
+
+maintainers:
+ - Josh Cartwright <joshc@xxxxxxxxxxxxxx>
+
+description: |
+ The System Power Management (SPMI) controller is a 2-wire bus defined
+ by the MIPI Alliance for power management control to be used on SoC designs.
+
+ SPMI controllers are modelled in device tree using a generic set of
+ bindings defined here, plus any bus controller specific properties, if
+ needed.
+
+ Each SPMI controller has zero or more child nodes (up to 16 ones), each
+ one representing an unique slave at the bus.
+
+properties:
+ $nodename:
+ pattern: "spmi@[0-9a-f]+"
+
+ compatible:
+ description: filled by the SPMI bus controller
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ "@([0-9]|1[0-5])$":
+ description: up to 16 child PMIC nodes
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/spmi/spmi.h>
+
+ spmi@.. {
+ compatible = "...";
+ reg = <...>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ child@0 {
+ compatible = "...";
+ reg = <0 SPMI_USID>;
+ };
+
+ child@7 {
+ compatible = "...";
+ reg = <7 SPMI_USID
+ 3 SPMI_GSID>;
+ };
+ };
--
2.26.2