[PATCH 04/10] usb: xhci-rcar: convert to readl_poll_timeout_atomic()

From: Chunfeng Yun
Date: Wed Aug 19 2020 - 08:43:47 EST


Use readl_poll_timeout_atomic() to simplify code

Cc: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
drivers/usb/host/xhci-rcar.c | 43 ++++++++++++-------------------------------
1 file changed, 12 insertions(+), 31 deletions(-)

diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index c1025d3..74f836f 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -6,6 +6,7 @@
*/

#include <linux/firmware.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
@@ -127,8 +128,7 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
void __iomem *regs = hcd->regs;
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
const struct firmware *fw;
- int retval, index, j, time;
- int timeout = 10000;
+ int retval, index, j;
u32 data, val, temp;
u32 quirks = 0;
const struct soc_device_attribute *attr;
@@ -166,32 +166,19 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
writel(temp, regs + RCAR_USB3_DL_CTRL);

- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0)
- break;
- udelay(1);
- }
- if (time == timeout) {
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
+ val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0),
+ 1, 10000);
+ if (retval < 0)
break;
- }
}

temp = readl(regs + RCAR_USB3_DL_CTRL);
temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
writel(temp, regs + RCAR_USB3_DL_CTRL);

- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) {
- retval = 0;
- break;
- }
- udelay(1);
- }
- if (time == timeout)
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL),
+ val, (val & RCAR_USB3_DL_CTRL_FW_SUCCESS), 1, 10000);

release_firmware(fw);

@@ -200,18 +187,12 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)

static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
{
- int timeout = 1000;
+ int retval;
u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK;

- while (timeout > 0) {
- val = readl(hcd->regs + RCAR_USB3_AXH_STA);
- if ((val & mask) == mask)
- return true;
- udelay(1);
- timeout--;
- }
-
- return false;
+ retval = readl_poll_timeout_atomic(hcd->regs + RCAR_USB3_AXH_STA,
+ val, ((val & mask) == mask), 1, 1000);
+ return !!retval;
}

/* This function needs to initialize a "phy" of usb before */
--
1.9.1