Re: [Letux-kernel] [PATCH] omap5: Fix DSI base address and clocks

[David Shah]

In any case the HDMI bug has reappeared while testing 5.9-rc1, although
I can get the display to work by doing 'modprobe omapdrm' even if HDMI
is enabled (as before it loads automatically if HDMI is disabled).

Best

David

On Wed, 2020-08-19 at 08:58 +0300, Tony Lindgren wrote:
> * H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> [200818 09:58]:
> > > Am 18.08.2020 um 11:51 schrieb David Shah <dave@xxxxxx>:
> > > 
> > > DSI was not probing due to base address off by 0x1000, and
> > > sys_clk
> > > missing.
> > > 
> > > With this patch, the Pyra display works if HDMI is disabled in
> > > the
> > > device tree.
> > 
> > For me it also works if HDMI is not disabled.
> > So IMHO this comment is misleading.
> > 
> > Otherwise,
> > 
> > Tested-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> 
> Thanks pushed out into fixes. Looks like I missed removing the
> HDMI disabled comment part but seems like that's not critical
> and don't want to redo the branch after pushing out.
> 
> Regards,
> 
> Tony
> _______________________________________________
> https://projects.goldelico.com/p/gta04-kernel/
> Letux-kernel mailing list
> Letux-kernel@xxxxxxxxxxxxxxx
> http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel