Re: [PATCH v6 2/2] soc: mediatek: add mt6779 devapc driver

From: Neal Liu
Date: Tue Aug 18 2020 - 02:21:10 EST


Hi Chun-Kuang,

On Tue, 2020-08-18 at 10:44 +0800, Neal Liu wrote:
> Hi Chun-Kuang,
>
> On Mon, 2020-08-17 at 23:13 +0800, Chun-Kuang Hu wrote:
> > Hi, Neal:
> >
> > Neal Liu <neal.liu@xxxxxxxxxxxx> 於 2020年8月17日 週一 下午12:02寫道:
> > >
> > > Hi Chun-Kuang,
> > >
> > > On Sat, 2020-08-15 at 11:03 +0800, Chun-Kuang Hu wrote:
> > > > Hi, Neal:
> > > >
> > > > Neal Liu <neal.liu@xxxxxxxxxxxx> 於 2020年8月13日 週四 上午11:33寫道:
> > > > >
> > > > > MediaTek bus fabric provides TrustZone security support and data
> > > > > protection to prevent slaves from being accessed by unexpected
> > > > > masters.
> > > > > The security violation is logged and sent to the processor for
> > > > > further analysis or countermeasures.
> > > > >
> > > > > Any occurrence of security violation would raise an interrupt, and
> > > > > it will be handled by mtk-devapc driver. The violation
> > > > > information is printed in order to find the murderer.
> > > > >
> > > > > Signed-off-by: Neal Liu <neal.liu@xxxxxxxxxxxx>
> > > > > ---
> > > >
> > > > [snip]
> > > >
> > > > > +/*
> > > > > + * devapc_violation_irq - the devapc Interrupt Service Routine (ISR) will dump
> > > > > + * violation information including which master violates
> > > > > + * access slave.
> > > > > + */
> > > > > +static irqreturn_t devapc_violation_irq(int irq_number,
> > > > > + struct mtk_devapc_context *ctx)
> > > > > +{
> > > > > + /*
> > > > > + * Mask slave's irq before clearing vio status.
> > > > > + * Must do it to avoid nested interrupt and prevent
> > > > > + * unexpected behavior.
> > > > > + */
> > > > > + mask_module_irq(ctx, true);
> > > >
> > > > I still don't understand why nested interrupt happen. If two CPU
> > > > process different devapc interrupt at the same time, mask interrupt
> > > > could not prevent these two CPU to sync vio dbg at the same time. As I
> > > > know, in ARM CPU, only CPU0 process irq handler, and all devapc
> > > > interrupt has the same priority, so why nested interrupt happen? Could
> > > > you explain more detail about how nested interrupt happen?
> > >
> > > If there is another violation happened before previous violation is
> > > fully handled, nested interrupt would happen.
> > >
> > > Let's me take an example:
> > > vio A happen
> > > enter A ISR
> > > ... vio B happen
> > > finish A ISR enter B ISR
> > > ...
> > > finish B ISR
> > >
> > > We mask all module's irq to avoid nested interrupt.
> >
> > This is not 'nested' interrupt. After A ISR is finished, B ISR happen.
> > So A ISR and B ISR are consecutive interrupt, not nested interrupt.
> > To compare mask irq and no mask irq, Let's consider this situation:
> >
> > 1. 1000 consecutive violation happen, the time period between two
> > violation is 0.01 ms, so the total time is 10ms. (In 10ms, 1000
> > violation happen)
> > 2. One ISR handle time is 1 ms, so in one ISR handler, 100 violation happen.
> >
> > For mask irq solution, 10 ISR handler is trigger. For no mask irq
> > solution, 11 ISR handler is trigger.
> > I think these two solution have similar result, and no mask irq
> > solution print more information (If these 1000 violation is trigger by
> > 20 different driver, no mask solution may show one more driver than
> > mask solution)
> > So I think it's not necessary to mask irq in irq handler.
> >
>
> No, my example is B ISR is entered before A ISR finished.
> Why this is not nested?
> vio A happen
> enter A ISR
> ... vio B happen
> ... enter B ISR
> finish A ISR
> ...
> ...
> finish B ISR
>

I have some misunderstanding about how ARM CPU & GIC works. I'll confirm
it and get back to you. Please ignore previous mail thread.
Thanks !

> > >
> > > >
> > > > > +
> > > > > + while (devapc_sync_vio_dbg(ctx))
> > > > > + devapc_extract_vio_dbg(ctx);
> > > > > +
> > > > > + /*
> > > > > + * Ensure that violation info are written
> > > > > + * before further operations
> > > > > + */
> > > > > + smp_mb();
> > > > > +
> > > > > + clear_vio_status(ctx);
> > > > > + mask_module_irq(ctx, false);
> > > > > +
> > > > > + return IRQ_HANDLED;
> > > > > +}
> > > > > +
> > > >
> > > > [snip]
> > > >
> > > > > +
> > > > > +static int mtk_devapc_remove(struct platform_device *pdev)
> > > > > +{
> > > > > + struct mtk_devapc_context *ctx = platform_get_drvdata(pdev);
> > > > > +
> > > > > + stop_devapc(ctx);
> > > > > +
> > > > > + if (ctx->infra_clk)
> > > >
> > > > This always true.
> > >
> > > Does it mean that remove function would be called only if probe function
> > > is returned successfully?
> >
> > Yes.
> >
> > > Is there any chance this function would be called directly?
> >
> > No.
> >
> > Regards,
> > Chun-Kuang.
> >
> > >
> > > >
> > > > Regards,
> > > > Chun-Kuang.
> > > >
> > > > > + clk_disable_unprepare(ctx->infra_clk);
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +static struct platform_driver mtk_devapc_driver = {
> > > > > + .probe = mtk_devapc_probe,
> > > > > + .remove = mtk_devapc_remove,
> > > > > + .driver = {
> > > > > + .name = KBUILD_MODNAME,
> > > > > + .of_match_table = mtk_devapc_dt_match,
> > > > > + },
> > > > > +};
> > > > > +
> > > > > +module_platform_driver(mtk_devapc_driver);
> > > > > +
> > > > > +MODULE_DESCRIPTION("Mediatek Device APC Driver");
> > > > > +MODULE_AUTHOR("Neal Liu <neal.liu@xxxxxxxxxxxx>");
> > > > > +MODULE_LICENSE("GPL");
> > > > > --
> > > > > 1.7.9.5
> > > > > _______________________________________________
> > > > > Linux-mediatek mailing list
> > > > > Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> > > > > http://lists.infradead.org/mailman/listinfo/linux-mediatek
> > >
>
>