[PATCH 5.8 054/464] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3

From: Greg Kroah-Hartman
Date: Mon Aug 17 2020 - 11:22:34 EST


From: Christian Hewitt <christianshewitt@xxxxxxxxx>

[ Upstream commit f1bb924e8f5b50752a80fa5b48c43003680a7b64 ]

Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
tuning errors on VIM3 after a few hours uptime:

[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution failed: -5
[35359.953671] mmc0: tuning execution failed: -5
[35561.875332] mmc0: tuning execution failed: -5
[61733.348709] mmc0: tuning execution failed: -5

I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
to silence the error, then (re)add it to the VIM3L dts.

Fixes: 4f26cc1c96c9 ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi")
Fixes: 700ab8d83927 ("arm64: dts: khadas-vim3: add support for the SM1 based VIM3L")
Signed-off-by: Christian Hewitt <christianshewitt@xxxxxxxxx>
Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200721015950.11816-1-christianshewitt@xxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 1 -
arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 4 ++++
2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 1ef1e3672b967..ff5ba85b7562e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -270,7 +270,6 @@ &sd_emmc_a {

bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr50;
max-frequency = <100000000>;

non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index dbbf29a0dbf6d..026b21708b078 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -88,6 +88,10 @@ &pcie {
status = "okay";
};

+&sd_emmc_a {
+ sd-uhs-sdr50;
+};
+
&usb {
phys = <&usb2_phy0>, <&usb2_phy1>;
phy-names = "usb2-phy0", "usb2-phy1";
--
2.25.1