[PATCH v4 2/3] dt-bindings: pinctrl: mt8192: add binding document

From: Zhiyong Tao
Date: Sun Aug 16 2020 - 20:18:29 EST


The commit adds mt8192 compatible node in binding document.

Signed-off-by: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
---
.../bindings/pinctrl/pinctrl-mt8192.yaml | 155 ++++++++++++++++++
1 file changed, 155 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
new file mode 100644
index 000000000000..5556def6b99b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8192.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8192 Pin Controller
+
+maintainers:
+ - Sean Wang <sean.wang@xxxxxxxxxxxx>
+
+description: |
+ The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: mediatek,mt8192-pinctrl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: |
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below
+ mentioned gpio binding representation for description of particular cells.
+ const: 2
+
+ gpio-ranges:
+ description: gpio valid number range.
+ maxItems: 1
+
+ reg:
+ description: |
+ Physical address base for gpio base registers. There are 11 GPIO
+ physical address base in mt8192.
+ maxItems: 11
+
+ reg-names:
+ description: |
+ Gpio base register names.
+ maxItems: 11
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ description: The interrupt outputs to sysirq.
+ maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '^pins':
+ type: object
+ description: |
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and
+ input schmitt.
+ An example of using macro:
+ pincontroller {
+ /* GPIO0 set as multifunction GPIO0 */
+ state_0_node_a {
+ pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+ };
+ /* GPIO1 set as multifunction PWM */
+ state_0_node_b {
+ pinmux = <PINMUX_GPIO1__FUNC_PWM_1>;
+ };
+ };
+ $ref: "pinmux-node.yaml"
+
+ properties:
+ pinmux:
+ description: |
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are defined
+ as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+ drive-strength:
+ description: |
+ It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See
+ dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8192-pinctrl";
+ reg = <0x10005000 0x1000>,
+ <0x11c20000 0x1000>,
+ <0x11d10000 0x1000>,
+ <0x11d30000 0x1000>,
+ <0x11d40000 0x1000>,
+ <0x11e20000 0x1000>,
+ <0x11e70000 0x1000>,
+ <0x11ea0000 0x1000>,
+ <0x11f20000 0x1000>,
+ <0x11f30000 0x1000>,
+ <0x1000b000 0x1000>;
+ reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
+ "iocfg_bl", "iocfg_br", "iocfg_lm",
+ "iocfg_lb", "iocfg_rt", "iocfg_lt",
+ "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 220>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+ #interrupt-cells = <2>;
+
+ pins {
+ pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+ output-low;
+ };
+ };
--
2.18.0