Re: [net-next v5 PATCH 0/7] Add PRP driver

[Murali Karicheri]

Hi Dave,

On 7/27/20 3:21 PM, David Miller wrote:
> From: Murali Karicheri <m-karicheri2@xxxxxx>
> Date: Wed, 22 Jul 2020 10:40:15 -0400
>
> > This series is dependent on the following patches sent out to
> > netdev list. All (1-3) are already merged to net/master as of
> > sending this, but not on the net-next master branch. So need
> > to apply them to net-next before applying this series. v3 of
> > the iproute2 patches can be merged to work with this series
> > as there are no updates since then.
> >
> > [1] https://marc.info/?l=linux-netdev&m=159526378131542&w=2
> > [2] https://marc.info/?l=linux-netdev&m=159499772225350&w=2
> > [3] https://marc.info/?l=linux-netdev&m=159499772425352&w=2
> >
> > This series adds support for Parallel Redundancy Protocol (PRP)
> > in the Linux HSR driver as defined in IEC-62439-3. PRP Uses a
> > Redundancy Control Trailer (RCT) the format of which is
> > similar to HSR Tag. This is used for implementing redundancy.
>   ...
>
> Series applied to net-next, thank you.
Thanks for applying this series. Just wondering who will
pick up the v3 of the iproute2 patch I have posted to go
with this.

https://marc.info/?l=linux-netdev&m=159499933326135&w=2

I will reply to that thread as well.

Thanks
--
Murali Karicheri
Texas Instruments