Re: [PATCH 3/4] arm64: dts: ti: Add support for J7200 SoC

[Grygorii Strashko]

On 23/07/2020 11:46, Lokesh Vutla wrote:
> The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
> It is targeted for automotive gateway, vehicle compute systems,
> Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
> The SoC aims to meet the complex processing needs of modern embedded
> products.
>
> Some highlights of this SoC are:
> * Dual Cortex-A72s in a single cluster, two clusters of lockstep
>    capable dual Cortex-R5F MCUs and a Centralized Device Management and
>    Security Controller (DMSC).
> * Configurable L3 Cache and IO-coherent architecture with high data
>    throughput capable distributed DMA architecture under NAVSS.
> * Integrated Ethernet switch supporting up to a total of 4 external ports
>    in addition to legacy Ethernet switch of up to 2 ports.
> * Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems,
>    20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C
>    and I2C, eCAP/eQEP, eHRPWM among other peripherals.
> * One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
>    management.
>
> See J7200 Technical Reference Manual (SPRUIU1, June 2020)
> for further details: https://www.ti.com/lit/pdf/spruiu1
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx>
> ---
>   arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 199 ++++++++++++++++++
>   .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      |  84 ++++++++
>   arch/arm64/boot/dts/ti/k3-j7200.dtsi          | 165 +++++++++++++++
>   3 files changed, 448 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
>   create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
>   create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> new file mode 100644
> index 000000000000..70c8f7e941fb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> @@ -0,0 +1,199 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for J7200 SoC Family Main Domain peripherals
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +&cbass_main {
> +	msmc_ram: sram@70000000 {
> +		compatible = "mmio-sram";
> +		reg = <0x0 0x70000000 0x0 0x100000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x0 0x70000000 0x100000>;
> +
> +		atf-sram@0 {
> +			reg = <0x0 0x20000>;
> +		};
> +	};
> +
> +	gic500: interrupt-controller@1800000 {
> +		compatible = "arm,gic-v3";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
> +		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
> +
> +		/* vcpumntirq: virtual CPU interface maintenance interrupt */
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> +		gic_its: msi-controller@1820000 {
> +			compatible = "arm,gic-v3-its";
> +			reg = <0x00 0x01820000 0x00 0x10000>;
> +			socionext,synquacer-pre-its = <0x1000000 0x400000>;
> +			msi-controller;
> +			#msi-cells = <1>;
> +		};
> +	};
> +
> +	main_navss: navss@30000000 {
> +		compatible = "simple-mfd";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;

Can we return back
ti,sci-dev-id = <199>;

here? it's needed for DMA PSI-L pairing.

Option: add it as part of dma/net submission.

[...]

--
Best regards,
grygorii