[PATCH 00/15] sx9310 iio driver updates

[Daniel Campello]

The first patch resends the DT binding for the driver that was merged in
v5.8-rc1 with a small change to update for proper regulators. The second
through the eleventh patch fixes several issues dropped from v8 to v9
when the initial patch was merged. The twelveth patch fixes a few
printks that are missing newlines and should be totally non-trivial to
apply. The thirteenth patch drops channel_users because it's unused. The
final patch adds support to enable the svdd and vdd supplies so that
this driver can work on a board where the svdd supply isn't enabled at
boot and needs to be turned on before this driver starts to communicate
with the chip.


Daniel Campello (12):
  dt-bindings: iio: Add bindings for sx9310 sensor
  iio: sx9310: Update macros declarations
  iio: sx9310: Fix irq handling
  iio: sx9310: Remove acpi and of table macros
  iio: sx9310: Change from .probe to .probe_new
  iio: sx9310: Align memory
  iio: sx9310: Use long instead of int for channel bitmaps
  iio: sx9310: Use regmap_read_poll_timeout() for compensation
  iio: sx9310: Update copyright
  iio: sx9310: Simplify error return handling
  iio: sx9310: Use variable to hold &client->dev
  iio: sx9310: Miscellaneous format fixes

Stephen Boyd (3):
  iio: sx9310: Add newlines to printks
  iio: sx9310: Drop channel_users[]
  iio: sx9310: Enable vdd and svdd regulators at probe

 .../iio/proximity/semtech,sx9310.yaml         |  60 +++
 drivers/iio/proximity/sx9310.c                | 407 +++++++++---------
 2 files changed, 263 insertions(+), 204 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml

--
2.28.0.rc0.142.g3c755180ce-goog