Re: [PATCH 1/3] dt-bindings: pinctrl: Add bindings for Actions S500 SoC

[Cristian Ciocaltea]

On Wed, Jul 15, 2020 at 02:03:09PM -0600, Rob Herring wrote:
> On Thu, Jun 25, 2020 at 11:16:18PM +0300, Cristian Ciocaltea wrote:
> > Add pinctrl and gpio bindings for Actions Semi S500 SoC.
> > 
> > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
> > ---
> >  .../pinctrl/actions,s500-pinctrl.yaml         | 228 ++++++++++++++++++
> >  1 file changed, 228 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> > new file mode 100644
> > index 000000000000..856947c70844
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> > @@ -0,0 +1,228 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Actions Semi S500 SoC pinmux & GPIO controller
> > +
> > +maintainers:
> > +  - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > +
> > +description: |
> > +  Pinmux & GPIO controller manages pin multiplexing & configuration including
> > +  GPIO function selection & GPIO attributes configuration. Please refer to
> > +  pinctrl-bindings.txt in this directory for common binding part and usage.
> > +
> > +properties:
> > +  compatible:
> > +    const: actions,s500-pinctrl
> > +
> > +  reg:
> > +    minItems: 1
> > +    maxItems: 4
> 
> Need to enumerate what each register range is.

Hi Rob,

Thanks for the review!

Would the update below suffice?

  reg:
    description: |
      Specifies the memory region(s) associated with the pin-controller.
      To improve granularity, up to four register ranges can be provided:
      * GPIO Output + GPIO Input + GPIO Data
      * Multiplexing Control
      * PAD Pull Control + PAD Schmitt Trigger enable + PAD Control
      * PAD Drive Capacity Select

> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  gpio-controller: true
> > +
> > +  gpio-ranges:
> > +    maxItems: 1
> > +
> > +  '#gpio-cells':
> > +    description:
> > +      Specifies the pin number and flags, as defined in
> > +      include/dt-bindings/gpio/gpio.h
> > +    const: 2
> > +
> > +  interrupt-controller: true
> > +
> > +  '#interrupt-cells':
> > +    description:
> > +      Specifies the pin number and flags, as defined in
> > +      include/dt-bindings/interrupt-controller/irq.h
> > +    const: 2
> > +
> > +  interrupts:
> > +    description:
> > +      One interrupt per each of the 5 GPIO ports supported by the controller,
> > +      sorted by port number ascending order.
> > +    minItems: 5
> > +    maxItems: 5
> > +
> > +patternProperties:
> > +  '^.*$':
> > +    if:
> > +      type: object
> 
> For a new binding, can you do '-pins$' for the node names so we don't 
> need this if/then hack.

Right, the idea was to be consistent with the existing bindings for
S700 and S900, which allow free node names, although they are not yet
converted to yaml format.

> > +    then:
> > +      patternProperties:
> > +        'pinmux$':
> 
> Is this really a pattern? Can't tell from the example.

pinmux and pinconf subnodes may appear multiple times, that's why I
decided to match their names based on the suffix.

The example is not complex enough, I will change it to the following:

    mmc0_default: mmc0_default {
        pinmux {
            groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
                     "sd0_cmd_mfp", "sd0_clk_mfp";
            function = "sd0";
        };

        drv_pinconf {
            groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
            drive-strength = <8>;
        };

        bias_pinconf {
            pins = "sd0_d0", "sd0_d1", "sd0_d2",
                   "sd0_d3", "sd0_cmd";
            bias-pull-up;
        };
    };

> > +          type: object
> > +          description:
> > +            Pinctrl node's client devices specify pin muxes using subnodes,
> > +            which in turn use the standard properties below.
> > +          $ref: pinmux-node.yaml#
> > +
> > +          properties:
> > +            groups:
> > +              description:
> > +                List of gpio pin groups affected by the functions specified in
> > +                this subnode.
> > +              items:
> > +                oneOf:
> > +                  - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
> > +                      rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp,
> > +                      rmii_rxd1_mfp, rmii_rxd0_mfp, rmii_ref_clk_mfp,
> > +                      i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp,
> > +                      i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp,
> > +                      ks_in3_mfp, ks_out0_mfp, ks_out1_mfp, ks_out2_mfp,
> > +                      lvds_o_pn_mfp, dsi_dn0_mfp, dsi_dp2_mfp, lcd0_d17_mfp,
> > +                      dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp, lvds_ee_pn_mfp,
> > +                      spi0_i2c_pcm_mfp, spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp,
> > +                      lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp,
> > +                      uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp,
> > +                      sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, sd1_d0_d3_mfp,
> > +                      sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, uart0_rx_mfp,
> > +                      clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
> > +                      uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
> > +                      pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
> > +                      dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
> > +                      nand_ceb3_mfp]
> > +              minItems: 1
> > +              maxItems: 32
> > +
> > +            function:
> > +              description:
> > +                Specify the alternative function to be configured for the
> > +                given gpio pin groups.
> > +              enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
> > +                sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
> > +                i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
> > +                p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
> > +                mipi_csi, nand, spdif, ts, lcd0]
> > +
> > +          required:
> > +            - groups
> > +            - function
> > +
> > +          additionalProperties: false
> > +
> > +        'pinconf$':
> > +          type: object
> > +          description:
> > +            Pinctrl node's client devices specify pin configurations using
> > +            subnodes, which in turn use the standard properties below.
> > +          $ref: pincfg-node.yaml#
> > +
> > +          properties:
> > +            groups:
> > +              description:
> > +                List of gpio pin groups affected by the drive-strength property
> > +                specified in this subnode.
> > +              items:
> > +                oneOf:
> > +                  - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
> > +                      rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
> > +                      smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
> > +                      i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
> > +                      lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
> > +                      sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
> > +                      spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
> > +                      i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
> > +                      sens0_ckout_drv, uart3_all_drv]
> > +              minItems: 1
> > +              maxItems: 32
> > +
> > +            pins:
> > +              description:
> > +                List of gpio pins affected by the bias-pull-* and
> > +                input-schmitt-* properties specified in this subnode.
> > +              items:
> > +                oneOf:
> > +                  - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
> > +                      eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
> > +                      eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
> > +                      i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
> > +                      i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0,
> > +                      ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn,
> > +                      lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap,
> > +                      lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn,
> > +                      lvds_ecp, lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap,
> > +                      lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, dsi_dn3, dsi_dp1,
> > +                      dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0, dsi_dp2,
> > +                      dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, sd1_d1,
> > +                      sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
> > +                      spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
> > +                      uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
> > +                      sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0,
> > +                      dnand_ceb1, dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx,
> > +                      uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb,
> > +                      uart3_ctsb, pcm1_in, pcm1_clk, pcm1_sync, pcm1_out,
> > +                      i2c1_sclk, i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0,
> > +                      csi_dp0, csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3,
> > +                      csi_dp3, csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2,
> > +                      dnand_d3, dnand_d4, dnand_d5, dnand_d6, dnand_d7,
> > +                      dnand_rb, dnand_rdb, dnand_rdbn, dnand_wrb, porb,
> > +                      clko_25m, bsel, pkg0, pkg1, pkg2, pkg3]
> > +              minItems: 1
> > +              maxItems: 64
> > +
> > +            bias-pull-up: true
> > +            bias-pull-down: true
> > +
> > +            drive-strength:
> > +              description:
> > +                Selects the drive strength for the specified pins, in mA.
> > +              enum: [2, 4, 8, 12]
> > +
> > +            input-schmitt-enable: true
> > +            input-schmitt-disable: true
> > +
> > +          additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - gpio-controller
> > +  - gpio-ranges
> > +  - '#gpio-cells'
> > +  - interrupt-controller
> > +  - '#interrupt-cells'
> > +  - interrupts
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    pinctrl: pinctrl@b01b0000 {
> > +        compatible = "actions,s500-pinctrl";
> > +        reg = <0xe01b0000 0x1000>;
> > +        clocks = <&cmu 20>;
> > +        gpio-controller;
> > +        gpio-ranges = <&pinctrl 0 0 132>;
> > +        #gpio-cells = <2>;
> > +        interrupt-controller;
> > +        #interrupt-cells = <2>;
> > +        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +        i2c0_default: i2c0_default {
> > +            pinmux {
> > +                groups = "i2c0_mfp";
> > +                function = "i2c0";
> > +            };
> > +
> > +            pinconf {
> > +                pins = "i2c0_sclk", "i2c0_sdata";
> > +                bias-pull-up;
> > +            };
> > +        };
> > +    };
> > +
> > +...
> > -- 
> > 2.27.0
> >