[PATCH net-next 00/12] bridge: mrp: Add support for interconnect ring

From: Horatiu Vultur
Date: Mon Jul 06 2020 - 05:20:44 EST


This patch series extends existing MRP to add support for interconnect ring. An
interconnect ring is a ring that connects 2 rings. In this way is possible to
connect multiple rings. Each interconnect ring is form of 4 nodes, in which 3
have the role MIC(Media Redundancy Interconnect Client) and one has the role
MIM(Media Redundancy Interconnect Manager). All these nodes need to have the
same ID and the ID needs to be unique between multiple interconnect rings. And 2
nodes needs to be part of one ring and the other 2 nodes needs to be part of the
other ring that is connected.

+---------+
| |
+----------| MRM |---------------+
| | | |
| +---------+ |
| |
| |
| |
+--------------+ +-----------------+
| | | |
| MRC/MIC |------------------| MRC/MIM |
| | | |
+--------------+ +-----------------+
| |
|Interconnect port |Interconnect port
| |
| |
+--------------+ +-----------------+
| | | |
| MRC/MIC |----------------- | MRC/MIC |
| | | |
+--------------+ +-----------------+
| |
| |
| +---------+ |
| | | |
+----------| MRM |----------------+
| |
+---------+

Each node in a ring needs to have one of the following ring roles, MRM or MRC.
And it can also have an interconnect role like MIM or MIC if it is part of an
interconnect ring. In the figure above the MRM doesn't have any interconnect
role but the MRC from the top ring have the interconnect roles MIC respectively
MIM. Therefore it is not possible for a node to have only an interconnect role.

There are 2 ways for interconnect ring to detect when is open or closed:
1. To use CCM frames on the interconnect port to detect when the interconnect
link goes down/up. This mode is called LC-mode.
2. To send InTest frames on all 3 ports(2 ring ports and 1 interconnect port)
and detect when these frames are received back. This mode is called RC-mode.

This patch series adds support only for RC-mode. Where MIM sends InTest frames
on all 3 ports and detects when it receives back the InTest. When it receives
the InTest it means that the ring is closed so it would set the interconnect
port in blocking state. If it stops receiving the InTest frames then it would
set the port in forwarding state and it would send InTopo frames. These InTopo
frames will be received by MRM nodes and process them. And then the MRM will
send Topo frames in the rings so each client will clear its FDB.

Horatiu Vultur (12):
switchdev: mrp: Extend switchdev API for MRP Interconnect
bridge: uapi: mrp: Extend MRP attributes for MRP interconnect
bridge: mrp: Extend bridge interface
bridge: mrp: Extend br_mrp for MRP interconnect
bridge: mrp: Rename br_mrp_port_open to br_mrp_ring_port_open
bridge: mrp: Add br_mrp_in_port_open function
bridge: switchdev: mrp: Extend MRP API for switchdev for MRP
Interconnect
bridge: mrp: Implement the MRP Interconnect API
bridge: mrp: Extend MRP netlink interface for configuring MRP
interconnect
bridge: uapi: mrp: Extend MRP_INFO attributes for interconnect status
bridge: mrp: Extend br_mrp_fill_info
net: bridge: Add port attribute IFLA_BRPORT_MRP_IN_OPEN

include/linux/if_bridge.h | 1 +
include/net/switchdev.h | 38 +++
include/uapi/linux/if_bridge.h | 58 ++++
include/uapi/linux/if_link.h | 1 +
include/uapi/linux/mrp_bridge.h | 38 +++
net/bridge/br_mrp.c | 531 +++++++++++++++++++++++++++--
net/bridge/br_mrp_netlink.c | 182 +++++++++-
net/bridge/br_mrp_switchdev.c | 62 ++++
net/bridge/br_netlink.c | 3 +
net/bridge/br_private_mrp.h | 27 +-
tools/include/uapi/linux/if_link.h | 1 +
11 files changed, 906 insertions(+), 36 deletions(-)

--
2.27.0