Re: [PATCH v2 5/8] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings

From: Krzysztof Kozlowski
Date: Sun Jul 05 2020 - 14:13:19 EST


On Thu, Jul 02, 2020 at 10:34:14PM +0200, Marek Szyprowski wrote:
> On 02.07.2020 17:51, Krzysztof Kozlowski wrote:
> > There is no need to keep DMA controller nodes under AMBA bus node.
> > Remove the "amba" node to fix dtschema warnings like:
> >
> > amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> >
> > ---
> >
> > Changes since v1:
> > 1. Remove the bus, as suggested by Marek
> > ---
> > arch/arm/boot/dts/exynos3250.dtsi | 47 +++----
> > arch/arm/boot/dts/exynos4.dtsi | 70 +++++-----
> > .../boot/dts/exynos4210-universal_c210.dts | 2 +-
> > arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++-------
> > arch/arm/boot/dts/exynos5410.dtsi | 46 +++----
> > arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++----------
> > 6 files changed, 174 insertions(+), 213 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
> > index 044e5da64a76..d3fb45a56527 100644
> > --- a/arch/arm/boot/dts/exynos3250.dtsi
> > +++ b/arch/arm/boot/dts/exynos3250.dtsi
> > @@ -418,33 +418,26 @@
> > status = "disabled";
> > };
> >
> > - amba {
> > - compatible = "simple-bus";
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > - ranges;
> > -
> > - pdma0: pdma@12680000 {
> > - compatible = "arm,pl330", "arm,primecell";
> > - reg = <0x12680000 0x1000>;
> > - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cmu CLK_PDMA0>;
> > - clock-names = "apb_pclk";
> > - #dma-cells = <1>;
> > - #dma-channels = <8>;
> > - #dma-requests = <32>;
> > - };
> > -
> > - pdma1: pdma@12690000 {
> > - compatible = "arm,pl330", "arm,primecell";
> > - reg = <0x12690000 0x1000>;
> > - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cmu CLK_PDMA1>;
> > - clock-names = "apb_pclk";
> > - #dma-cells = <1>;
> > - #dma-channels = <8>;
> > - #dma-requests = <32>;
> > - };
> > + pdma0: pdma@12680000 {
> > + compatible = "arm,pl330", "arm,primecell";
> > + reg = <0x12680000 0x1000>;
> > + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cmu CLK_PDMA0>;
> > + clock-names = "apb_pclk";
> > + #dma-cells = <1>;
> > + #dma-channels = <8>;
> > + #dma-requests = <32>;
> > + };
> > +
> > + pdma1: pdma@12690000 {
> > + compatible = "arm,pl330", "arm,primecell";
> > + reg = <0x12690000 0x1000>;
> > + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cmu CLK_PDMA1>;
> > + clock-names = "apb_pclk";
> > + #dma-cells = <1>;
> > + #dma-channels = <8>;
> > + #dma-requests = <32>;
> > };
> >
> > adc: adc@126c0000 {
> > diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> > index d2779a790ce3..a1e54449f33f 100644
> > --- a/arch/arm/boot/dts/exynos4.dtsi
> > +++ b/arch/arm/boot/dts/exynos4.dtsi
> > @@ -669,45 +669,37 @@
> > status = "disabled";
> > };
> >
> > - amba: amba {
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > - compatible = "simple-bus";
> > - interrupt-parent = <&gic>;
> > - ranges;
> > -
> > - pdma0: pdma@12680000 {
> > - compatible = "arm,pl330", "arm,primecell";
> > - reg = <0x12680000 0x1000>;
> > - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clock CLK_PDMA0>;
> > - clock-names = "apb_pclk";
> > - #dma-cells = <1>;
> > - #dma-channels = <8>;
> > - #dma-requests = <32>;
> > - };
> > -
> > - pdma1: pdma@12690000 {
> > - compatible = "arm,pl330", "arm,primecell";
> > - reg = <0x12690000 0x1000>;
> > - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clock CLK_PDMA1>;
> > - clock-names = "apb_pclk";
> > - #dma-cells = <1>;
> > - #dma-channels = <8>;
> > - #dma-requests = <32>;
> > - };
> > -
> > - mdma1: mdma@12850000 {
> > - compatible = "arm,pl330", "arm,primecell";
> > - reg = <0x12850000 0x1000>;
> > - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clock CLK_MDMA>;
> > - clock-names = "apb_pclk";
> > - #dma-cells = <1>;
> > - #dma-channels = <8>;
> > - #dma-requests = <1>;
> > - };
> > + pdma0: pdma@12680000 {
> > + compatible = "arm,pl330", "arm,primecell";
> > + reg = <0x12680000 0x1000>;
> > + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clock CLK_PDMA0>;
> > + clock-names = "apb_pclk";
> > + #dma-cells = <1>;
> > + #dma-channels = <8>;
> > + #dma-requests = <32>;
> > + };
> > +
> > + pdma1: pdma@12690000 {
> > + compatible = "arm,pl330", "arm,primecell";
> > + reg = <0x12690000 0x1000>;
> > + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clock CLK_PDMA1>;
> > + clock-names = "apb_pclk";
> > + #dma-cells = <1>;
> > + #dma-channels = <8>;
> > + #dma-requests = <32>;
> > + };
> > +
> > + mdma1: mdma@12850000 {
> > + compatible = "arm,pl330", "arm,primecell";
> > + reg = <0x12850000 0x1000>;
> > + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clock CLK_MDMA>;
> > + clock-names = "apb_pclk";
> > + #dma-cells = <1>;
> > + #dma-channels = <8>;
> > + #dma-requests = <1>;
> > };
> >
> > fimd: fimd@11c00000 {
> > diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> > index 02fde1a75ebd..e07aa3aa93bd 100644
> > --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
> > +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> > @@ -181,7 +181,7 @@
> > };
> > };
> >
> > -&amba {
> > +&soc {
>
>
> What about the alphabetical order of the labels here?

Yes, I'll keep them ordered. Thanks.

Best regards,
Krzysztof