[PATCH 7/9] pci: dwc: qcom: do phy power on before pcie init

From: Sivaprakash Murugesan
Date: Sun Jul 05 2020 - 05:18:39 EST


Commit cc1e06f033af ("phy: qcom: qmp: Use power_on/off ops for PCIe")
changed phy ops from init/deinit to power on/off, due to this phy enable
is getting called after pcie init.

On some platforms like ipq8074 phy should be inited before accessing the
pcie register space, otherwise the system would hang.

So move phy_power_on API before pcie init API.

Fixes: commit cc1e06f033af ("phy: qcom: qmp: Use power_on/off ops for PCIe")
Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@xxxxxxxxxxxxxx>
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@xxxxxxxxxxxxxx>
Signed-off-by: Sivaprakash Murugesan <sivaprak@xxxxxxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-qcom.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 138e1a2d21cc..aa52a2124760 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1222,18 +1222,18 @@ static int qcom_pcie_host_init(struct pcie_port *pp)

qcom_ep_reset_assert(pcie);

- ret = pcie->ops->init(pcie);
+ ret = phy_power_on(pcie->phy);
if (ret)
return ret;

- ret = phy_power_on(pcie->phy);
+ ret = pcie->ops->init(pcie);
if (ret)
- goto err_deinit;
+ goto err_disable_phy;

if (pcie->ops->post_init) {
ret = pcie->ops->post_init(pcie);
if (ret)
- goto err_disable_phy;
+ goto err_deinit;
}

dw_pcie_setup_rc(pp);
@@ -1252,10 +1252,10 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
qcom_ep_reset_assert(pcie);
if (pcie->ops->post_deinit)
pcie->ops->post_deinit(pcie);
-err_disable_phy:
- phy_power_off(pcie->phy);
err_deinit:
pcie->ops->deinit(pcie);
+err_disable_phy:
+ phy_power_off(pcie->phy);

return ret;
}
--
2.7.4