[PATCH V6 02/10] remoteproc: qcom: Add secure PIL support

From: Gokul Sriram Palanisamy
Date: Fri Jul 03 2020 - 05:09:49 EST


IPQ8074 uses secure PIL. Hence, adding the support for the same.

Signed-off-by: Gokul Sriram Palanisamy <gokulsri@xxxxxxxxxxxxxx>
Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
Signed-off-by: Nikhil Prakash V <nprakash@xxxxxxxxxxxxxx>
---
drivers/remoteproc/qcom_q6v5_wcss.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)

diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 9e9d702..7fd494f 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -19,6 +19,7 @@
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/soc/qcom/mdt_loader.h>
+#include <linux/qcom_scm.h>
#include "qcom_common.h"
#include "qcom_q6v5.h"

@@ -86,6 +87,9 @@
#define TCSR_WCSS_CLK_ENABLE 0x14

#define MAX_HALT_REG 3
+
+#define WCNSS_PAS_ID 6
+
enum {
WCSS_IPQ8074,
WCSS_QCS404,
@@ -134,6 +138,7 @@ struct q6v5_wcss {
int crash_reason_smem;
u32 version;
bool requires_force_stop;
+ bool need_mem_protection;

struct qcom_rproc_glink glink_subdev;
struct qcom_rproc_ssr ssr_subdev;
@@ -152,6 +157,7 @@ struct wcss_data {
int ssctl_id;
const struct rproc_ops *ops;
bool requires_force_stop;
+ bool need_mem_protection;
};

static int q6v5_wcss_reset(struct q6v5_wcss *wcss)
@@ -251,6 +257,15 @@ static int q6v5_wcss_start(struct rproc *rproc)

qcom_q6v5_prepare(&wcss->q6v5);

+ if (wcss->need_mem_protection) {
+ ret = qcom_scm_pas_auth_and_reset(WCNSS_PAS_ID);
+ if (ret) {
+ dev_err(wcss->dev, "wcss_reset failed\n");
+ return ret;
+ }
+ goto wait_for_reset;
+ }
+
/* Release Q6 and WCSS reset */
ret = reset_control_deassert(wcss->wcss_reset);
if (ret) {
@@ -285,6 +300,7 @@ static int q6v5_wcss_start(struct rproc *rproc)
if (ret)
goto wcss_q6_reset;

+wait_for_reset:
ret = qcom_q6v5_wait_for_start(&wcss->q6v5, 5 * HZ);
if (ret == -ETIMEDOUT)
dev_err(wcss->dev, "start timed out\n");
@@ -717,6 +733,15 @@ static int q6v5_wcss_stop(struct rproc *rproc)
struct q6v5_wcss *wcss = rproc->priv;
int ret;

+ if (wcss->need_mem_protection) {
+ ret = qcom_scm_pas_shutdown(WCNSS_PAS_ID);
+ if (ret) {
+ dev_err(wcss->dev, "not able to shutdown\n");
+ return ret;
+ }
+ goto pas_done;
+ }
+
/* WCSS powerdown */
if (wcss->requires_force_stop) {
ret = qcom_q6v5_request_stop(&wcss->q6v5);
@@ -741,6 +766,7 @@ static int q6v5_wcss_stop(struct rproc *rproc)
return ret;
}

+pas_done:
clk_disable_unprepare(wcss->prng_clk);
qcom_q6v5_unprepare(&wcss->q6v5);

@@ -763,6 +789,12 @@ static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
{
struct q6v5_wcss *wcss = rproc->priv;

+ if (wcss->need_mem_protection)
+ return qcom_mdt_load(wcss->dev, fw, rproc->firmware,
+ WCNSS_PAS_ID, wcss->mem_region,
+ wcss->mem_phys, wcss->mem_size,
+ &wcss->mem_reloc);
+
return qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
0, wcss->mem_region, wcss->mem_phys,
wcss->mem_size, &wcss->mem_reloc);
@@ -1025,6 +1057,9 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
if (!desc)
return -EINVAL;

+ if (desc->need_mem_protection && !qcom_scm_is_available())
+ return -EPROBE_DEFER;
+
rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops,
desc->firmware_name, sizeof(*wcss));
if (!rproc) {
@@ -1038,6 +1073,7 @@ static int q6v5_wcss_probe(struct platform_device *pdev)

wcss->version = desc->version;
wcss->requires_force_stop = desc->requires_force_stop;
+ wcss->need_mem_protection = desc->need_mem_protection;

ret = q6v5_wcss_init_mmio(wcss, pdev);
if (ret)
@@ -1106,6 +1142,7 @@ static const struct wcss_data wcss_ipq8074_res_init = {
.wcss_q6_reset_required = true,
.ops = &q6v5_wcss_ipq8074_ops,
.requires_force_stop = true,
+ .need_mem_protection = true,
};

static const struct wcss_data wcss_qcs404_res_init = {
--
2.7.4