[PATCH 1/3] clk: zynqmp: Use firmware specific common clock flags

From: Amit Sunil Dhamne
Date: Mon Jun 29 2020 - 20:30:25 EST


From: Rajan Vaja <rajan.vaja@xxxxxxxxxx>

Currently firmware passes CCF specific flags to ZynqMP clock driver.
So firmware needs to be updated if CCF flags are changed. The firmware
should have its own 'flag number space' that is distinct from the
common clk framework's 'flag number space'. So define and use ZynqMP
specific common clock flags instead of using CCF flags.

Signed-off-by: Rajan Vaja <rajan.vaja@xxxxxxxxxx>
Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xxxxxxxxxx>
---
drivers/clk/zynqmp/clk-zynqmp.h | 22 ++++++++++++++++++++++
drivers/clk/zynqmp/clkc.c | 25 +++++++++++++++++++++++--
2 files changed, 45 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/zynqmp/clk-zynqmp.h b/drivers/clk/zynqmp/clk-zynqmp.h
index 5beeb41..d8e580b 100644
--- a/drivers/clk/zynqmp/clk-zynqmp.h
+++ b/drivers/clk/zynqmp/clk-zynqmp.h
@@ -10,6 +10,28 @@

#include <linux/firmware/xlnx-zynqmp.h>

+/* Common Flags */
+/* must be gated across rate change */
+#define ZYNQMP_CLK_SET_RATE_GATE BIT(0)
+/* must be gated across re-parent */
+#define ZYNQMP_CLK_SET_PARENT_GATE BIT(1)
+/* propagate rate change up one level */
+#define ZYNQMP_CLK_SET_RATE_PARENT BIT(2)
+/* do not gate even if unused */
+#define ZYNQMP_CLK_IGNORE_UNUSED BIT(3)
+/* do not use the cached clk rate */
+#define ZYNQMP_CLK_GET_RATE_NOCACHE BIT(6)
+/* don't re-parent on rate change */
+#define ZYNQMP_CLK_SET_RATE_NO_REPARENT BIT(7)
+/* do not use the cached clk accuracy */
+#define ZYNQMP_CLK_GET_ACCURACY_NOCACHE BIT(8)
+/* recalc rates after notifications */
+#define ZYNQMP_CLK_RECALC_NEW_RATES BIT(9)
+/* clock needs to run to set rate */
+#define ZYNQMP_CLK_SET_RATE_UNGATE BIT(10)
+/* do not gate, ever */
+#define ZYNQMP_CLK_IS_CRITICAL BIT(11)
+
enum topology_type {
TYPE_INVALID,
TYPE_MUX,
diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c
index db8d0d7..8663587 100644
--- a/drivers/clk/zynqmp/clkc.c
+++ b/drivers/clk/zynqmp/clkc.c
@@ -385,14 +385,35 @@ static int __zynqmp_clock_get_topology(struct clock_topology *topology,
{
int i;
u32 type;
+ u32 flag;

for (i = 0; i < ARRAY_SIZE(response->topology); i++) {
type = FIELD_GET(CLK_TOPOLOGY_TYPE, response->topology[i]);
if (type == TYPE_INVALID)
return END_OF_TOPOLOGY_NODE;
topology[*nnodes].type = type;
- topology[*nnodes].flag = FIELD_GET(CLK_TOPOLOGY_FLAGS,
- response->topology[i]);
+ flag = FIELD_GET(CLK_TOPOLOGY_FLAGS, response->topology[i]);
+ topology[*nnodes].flag = 0;
+ topology[*nnodes].flag |= (flag & ZYNQMP_CLK_SET_RATE_GATE) ?
+ CLK_SET_RATE_GATE : 0;
+ topology[*nnodes].flag |= (flag & ZYNQMP_CLK_SET_RATE_PARENT) ?
+ CLK_SET_RATE_PARENT : 0;
+ topology[*nnodes].flag |= (flag & ZYNQMP_CLK_IGNORE_UNUSED) ?
+ CLK_IGNORE_UNUSED : 0;
+ topology[*nnodes].flag |= (flag & ZYNQMP_CLK_GET_RATE_NOCACHE) ?
+ CLK_GET_RATE_NOCACHE : 0;
+ topology[*nnodes].flag |= (flag &
+ ZYNQMP_CLK_SET_RATE_NO_REPARENT) ?
+ CLK_SET_RATE_NO_REPARENT : 0;
+ topology[*nnodes].flag |= (flag &
+ ZYNQMP_CLK_GET_ACCURACY_NOCACHE) ?
+ CLK_GET_ACCURACY_NOCACHE : 0;
+ topology[*nnodes].flag |= (flag & ZYNQMP_CLK_RECALC_NEW_RATES) ?
+ CLK_RECALC_NEW_RATES : 0;
+ topology[*nnodes].flag |= (flag & ZYNQMP_CLK_SET_RATE_UNGATE) ?
+ CLK_SET_RATE_UNGATE : 0;
+ topology[*nnodes].flag |= (flag & ZYNQMP_CLK_IS_CRITICAL) ?
+ CLK_IS_CRITICAL : 0;
topology[*nnodes].type_flag =
FIELD_GET(CLK_TOPOLOGY_TYPE_FLAGS,
response->topology[i]);
--
2.7.4

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.