[PATCH 5.7 078/265] usb: cdns3: trace: using correct dir value

From: Sasha Levin
Date: Mon Jun 29 2020 - 17:59:22 EST


From: Peter Chen <peter.chen@xxxxxxx>

commit ba3a80fe0fb67d8790f62b7bc60df97406d89871 upstream.

It should use the correct direction value from register, not depends
on previous software setting. It fixed the EP number wrong issue at
trace when the TRBERR interrupt occurs for EP0IN.

When the EP0IN IOC has finished, software prepares the setup packet
request, the expected direction is OUT, but at that time, the TRBERR
for EP0IN may occur since it is DMULT mode, the DMA does not stop
until TRBERR has met.

Cc: <stable@xxxxxxxxxxxxxxx>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/cdns3/trace.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h
index 8d121e207fd8f..755c565822575 100644
--- a/drivers/usb/cdns3/trace.h
+++ b/drivers/usb/cdns3/trace.h
@@ -156,7 +156,7 @@ DECLARE_EVENT_CLASS(cdns3_log_ep0_irq,
__dynamic_array(char, str, CDNS3_MSG_MAX)
),
TP_fast_assign(
- __entry->ep_dir = priv_dev->ep0_data_dir;
+ __entry->ep_dir = priv_dev->selected_ep;
__entry->ep_sts = ep_sts;
),
TP_printk("%s", cdns3_decode_ep0_irq(__get_str(str),
--
2.25.1