Re: [PATCH v8 0/3] phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver

[Laurent Pinchart]

Hi Vinod,

On Mon, Jun 29, 2020 at 03:09:43PM +0530, Vinod Koul wrote:
> On 13-05-20, 20:22, Laurent Pinchart wrote:
> > Hello,
> > 
> > The patch series adds a PHY driver for the Xilinx ZynqMP gigabit serial
> > transceivers (PS-GTR). The PS-GTR is a set of 4 PHYs that can be used by
> > the PCIe, USB 3.0, DisplayPort, SATA and Ethernet controllers that are
> > part of the Serial I/O Unit (SIOU).
> > 
> > The code is based on a previous version sent by Anurag Kumar Vulisha and
> > available at [1]. The DT bindings have been converted to YAML, and both
> > the bindings and the driver have been considerably reworked (and
> > simplified). The most notable changes is the removal of manual handling
> > of the reset lines of the PHY users (which belongs to the PHY users
> > themselves), and moving to the standard PHY .power_on() and .configure()
> > operations to replace functions that were previously exported by the
> > driver. Please see individual patches for a more detailed changelog.
> > 
> > Compared to v7, review comments on the PHY driver have been taken into
> > account, and the DT bindings have switched to the GPL-2.0-only OR
> > BSD-2-Clause license
> > 
> > The code is based on v5.6 and has been tested with DisplayPort on the
> > Xilinx ZC106 board.
> 
> This (dt patch and 8.1 update) fails to apply for me, can you please
> rebased on phy-next and resend. Also I saw this while trying to apply:
> 
> WARNING: Misordered MAINTAINERS entry - list 'S:' before 'T:'
> #403: FILE: MAINTAINERS:18605:
> +T:	git https://github.com/Xilinx/linux-xlnx.git
> +S:	Supported

Rebased, fixed and resent.

-- 
Regards,

Laurent Pinchart