Re: [PATCH v3 04/17] arm64: dts: sc7180: Add OPP table for all qup devices

[Rajendra Nayak]

On 6/25/2020 8:47 PM, Matthias Kaehlcke wrote:
> Hi Rajendra,
>
> On Tue, Apr 28, 2020 at 07:02:52PM +0530, Rajendra Nayak wrote:
> > qup has a requirement to vote on the performance state of the CX domain
> > in sc7180 devices. Add OPP tables for these and also add power-domains
> > property for all qup instances.
> >
> > Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/sc7180.dtsi | 79 ++++++++++++++++++++++++++++++++++++
> >   1 file changed, 79 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > index 998f101..efba600 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -417,6 +417,25 @@
> >   			status = "disabled";
> >   		};
> >   
> > +		qup_opp_table: qup-opp-table {
> > +			compatible = "operating-points-v2";
> > +
> > +			opp-75000000 {
> > +				opp-hz = /bits/ 64 <75000000>;
> > +				required-opps = <&rpmhpd_opp_low_svs>;
> > +			};
> > +
> > +			opp-100000000 {
> > +				opp-hz = /bits/ 64 <100000000>;
> > +				required-opps = <&rpmhpd_opp_svs>;
> > +			};
> > +
> > +			opp-128000000 {
> > +				opp-hz = /bits/ 64 <128000000>;
> > +				required-opps = <&rpmhpd_opp_nom>;
> > +			};
> > +		};
> > +
> >   		qupv3_id_0: geniqup@8c0000 {
> >   			compatible = "qcom,geni-se-qup";
> >   			reg = <0 0x008c0000 0 0x6000>;
>
>
> no entries for i2c0?

I have actually wrongly added them for some i2c instances, I need to drop all of them.
geni i2c does not support dvfs, it just uses a fixed clock.

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation