Re: [PATCH v1] mtd: spi-nor: Add support for Winbond w25q64jv spi flash

From: Tudor.Ambarus
Date: Mon Jun 29 2020 - 15:02:23 EST


On 6/29/20 5:53 PM, Sven Van Asbroeck wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Hi Tudor,
>
> On Mon, Jun 29, 2020 at 8:50 AM <Tudor.Ambarus@xxxxxxxxxxxxx> wrote:
>>
>> I'm reading the following datasheet:
>> https://www.winbond.com/resource-files/w25q64jv%20revj%2003272018%20plus.pdf
>>
>> w25q64jvm (0xef7017) comes with QE bit set to a 0 state, but can be
>> set to 1, so Quad mode can be supported. Would you please set SPI_NOR_DUAL_READ
>> and SPI_NOR_QUAD_READ flags and test and see if Quad works? If all good,
>> please specify in the commit message with which controller you did the tests.
>>
>
> Good point !
>
> Unfortunately I'm using the spi controller on an imx6 ("fsl,imx51-ecspi") which
> does not support dual or quad mode. So I cannot possibly test this :)
>
> How would you like to proceed? Should I keep this as a private patch, and
> wait until someone comes along who can test this on more capable
> controller h/w ?
>
> Or should I re-spin the patch without the flags?
>

Re-spin the patch without the flags. We can add them later on, when someone can
test them.

Cheers,
ta