[PATCH v2] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC

From: Tamseel Shams
Date: Sun Jun 28 2020 - 03:19:47 EST


In few older Samsung SoCs like s3c2410, s3c2412
and s3c2440, UART IP is having 2 interrupt lines.
However, in other SoCs like s3c6400, s5pv210,
exynos5433, and exynos4210 UART is having only 1
interrupt line. Due to this, "platform_get_irq(platdev, 1)"
call in the driver gives the following warning:
"IRQ index 1 not found" on recent platforms.

This patch re-factors the IRQ resources handling for
each platform and hence fixing the above warnings seen
on some platforms.

Signed-off-by: Tamseel Shams <m.shams@xxxxxxxxxxx>
---
Removed the RFC tag and using 'platform_get_irq_optional'
instead of 'platform_get_irq' as per comment received from
Robin Murphy.

drivers/tty/serial/samsung_tty.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 6ef614d8648c..60554f42e208 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -60,6 +60,7 @@ struct s3c24xx_uart_info {
char *name;
unsigned int type;
unsigned int fifosize;
+ unsigned int irq_cnt;
unsigned long rx_fifomask;
unsigned long rx_fifoshift;
unsigned long rx_fifofull;
@@ -1908,10 +1909,13 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
else {
port->irq = ret;
ourport->rx_irq = ret;
- ourport->tx_irq = ret + 1;
+ if (ourport->info->irq_cnt == 1)
+ ourport->tx_irq = ret;
+ else
+ ourport->tx_irq = ret + 1;
}

- ret = platform_get_irq(platdev, 1);
+ ret = platform_get_irq_optional(platdev, 1);
if (ret > 0)
ourport->tx_irq = ret;
/*
@@ -2387,6 +2391,7 @@ static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
.name = "Samsung S3C2410 UART",
.type = PORT_S3C2410,
.fifosize = 16,
+ .irq_cnt = 2,
.rx_fifomask = S3C2410_UFSTAT_RXMASK,
.rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
.rx_fifofull = S3C2410_UFSTAT_RXFULL,
@@ -2414,6 +2419,7 @@ static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
.name = "Samsung S3C2412 UART",
.type = PORT_S3C2412,
.fifosize = 64,
+ .irq_cnt = 2,
.has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
@@ -2443,6 +2449,7 @@ static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
.name = "Samsung S3C2440 UART",
.type = PORT_S3C2440,
.fifosize = 64,
+ .irq_cnt = 2,
.has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
@@ -2471,6 +2478,7 @@ static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
.name = "Samsung S3C6400 UART",
.type = PORT_S3C6400,
.fifosize = 64,
+ .irq_cnt = 1,
.has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
@@ -2498,6 +2506,7 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
.info = &(struct s3c24xx_uart_info) {
.name = "Samsung S5PV210 UART",
.type = PORT_S3C6400,
+ .irq_cnt = 1,
.has_divslot = 1,
.rx_fifomask = S5PV210_UFSTAT_RXMASK,
.rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
@@ -2526,6 +2535,7 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
.info = &(struct s3c24xx_uart_info) { \
.name = "Samsung Exynos UART", \
.type = PORT_S3C6400, \
+ .irq_cnt = 1, \
.has_divslot = 1, \
.rx_fifomask = S5PV210_UFSTAT_RXMASK, \
.rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
--
2.17.1