RE: [PATCH v2 2/2] arm64: mm: reserve per-numa CMA after numa_init

From: Song Bao Hua (Barry Song)
Date: Thu Jun 25 2020 - 23:44:17 EST




> -----Original Message-----
> From: Robin Murphy [mailto:robin.murphy@xxxxxxx]
> Sent: Thursday, June 25, 2020 11:16 PM
> To: Song Bao Hua (Barry Song) <song.bao.hua@xxxxxxxxxxxxx>; hch@xxxxxx;
> m.szyprowski@xxxxxxxxxxx; will@xxxxxxxxxx;
> ganapatrao.kulkarni@xxxxxxxxxx; catalin.marinas@xxxxxxx
> Cc: iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx; Linuxarm <linuxarm@xxxxxxxxxx>;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Nicolas
> Saenz Julienne <nsaenzjulienne@xxxxxxx>; Steve Capper
> <steve.capper@xxxxxxx>; Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>;
> Mike Rapoport <rppt@xxxxxxxxxxxxx>
> Subject: Re: [PATCH v2 2/2] arm64: mm: reserve per-numa CMA after
> numa_init
>
> On 2020-06-25 08:43, Barry Song wrote:
> > Right now, smmu is using dma_alloc_coherent() to get memory to save
> queues
> > and tables. Typically, on ARM64 server, there is a default CMA located at
> > node0, which could be far away from node2, node3 etc.
> > with this patch, smmu will get memory from local numa node to save
> command
> > queues and page tables. that means dma_unmap latency will be shrunk
> much.
> > Meanwhile, when iommu.passthrough is on, device drivers which call dma_
> > alloc_coherent() will also get local memory and avoid the travel between
> > numa nodes.
> >
> > Cc: Christoph Hellwig <hch@xxxxxx>
> > Cc: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> > Cc: Will Deacon <will@xxxxxxxxxx>
> > Cc: Robin Murphy <robin.murphy@xxxxxxx>
> > Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@xxxxxxxxxx>
> > Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
> > Cc: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> > Cc: Steve Capper <steve.capper@xxxxxxx>
> > Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> > Cc: Mike Rapoport <rppt@xxxxxxxxxxxxx>
> > Signed-off-by: Barry Song <song.bao.hua@xxxxxxxxxxxxx>
> > ---
> > arch/arm64/mm/init.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
> > index 1e93cfc7c47a..07d4d1fe7983 100644
> > --- a/arch/arm64/mm/init.c
> > +++ b/arch/arm64/mm/init.c
> > @@ -420,6 +420,8 @@ void __init bootmem_init(void)
> >
> > arm64_numa_init();
> >
> > + dma_pernuma_cma_reserve();
> > +
>
> It might be worth putting this after the hugetlb_cma_reserve() call for
> clarity, since the comment below applies equally to this call too.

Yep, it looks even better though dma_pernuma_cma_reserve() is self-documenting by name.

>
> Robin.
>
> > /*
> > * must be done after arm64_numa_init() which calls numa_init() to
> > * initialize node_online_map that gets used in hugetlb_cma_reserve()
> >
Thanks
Barry