Re: [PATCH v2] dma-pool: Fix too large DMA pools on medium systems

[David Rientjes]

On Sun, 21 Jun 2020, Guenter Roeck wrote:

> >> This patch results in a boot failure in some of my powerpc boot tests,
> >> specifically those testing boots from mptsas1068 devices. Error message:
> >>
> >> mptsas 0000:00:02.0: enabling device (0000 -> 0002)
> >> mptbase: ioc0: Initiating bringup
> >> ioc0: LSISAS1068 A0: Capabilities={Initiator}
> >> mptbase: ioc0: ERROR - Unable to allocate Reply, Request, Chain Buffers!
> >> mptbase: ioc0: ERROR - didn't initialize properly! (-3)
> >> mptsas: probe of 0000:00:02.0 failed with error -3
> >>
> >> Configuration is bamboo:44x/bamboo_defconfig plus various added drivers.
> >> Qemu command line is
> >>
> >> qemu-system-ppc -kernel vmlinux -M bamboo \
> >>      -m 256 -no-reboot -snapshot -device mptsas1068,id=scsi \
> >>      -device scsi-hd,bus=scsi.0,drive=d0,wwn=0x5000c50015ea71ac -drive \
> >>      file=rootfs.ext2,format=raw,if=none,id=d0 \
> >>      --append "panic=-1 slub_debug=FZPUA root=/dev/sda  mem=256M console=ttyS0" \
> >>      -monitor none -nographic
> >>
> >> canyonlands_defconfig with sam460ex machine and otherwise similar command line
> >> fails as well.
> >>
> >> Reverting this patch fixes the problem.
> > 
> > This looks like the minimum value of 128 KiB is not sufficient, and the
> > bug is in the intention of 1d659236fb43c4d2 ("dma-pool: scale the
> > default DMA coherent pool size with memory capacity")?
> > Before, there was a single pool of (fixed) 256 KiB size, now there are
> > up to three coherent pools (DMA, DMA32, and kernel), albeit of smaller
> > size (128 KiB each).
> > 
> > Can you print the requested size in drivers/message/fusion/mptbase.c:
> > PrimeIocFifos()?
> 
> 172928 bytes
> 
> > Does replacing all SZ_128K by SZ_256K in my patch help?
> 
> Yes, it does.
> 

The new coherent pools should auto expand when they are close to being 
depleted but there's no guarantee that it can be done fast enough.  
Switching the min size to be the previous min size (256KB) seems like the 
best option and it matches what 
Documentation/admin-guide/kernel-parameters.txt still stays.

I'll also send a patch to point in the right direction when this happens.