[PATCH 5.6 092/161] spi: bcm-qspi: when tx/rx buffer is NULL set to 0

From: Greg Kroah-Hartman
Date: Tue Jun 16 2020 - 12:00:58 EST


From: Justin Chen <justinpopo6@xxxxxxxxx>

commit 4df3bea7f9d2ddd9ac2c29ba945c7c4db2def29c upstream.

Currently we set the tx/rx buffer to 0xff when NULL. This causes
problems with some spi slaves where 0xff is a valid command. Looking
at other drivers, the tx/rx buffer is usually set to 0x00 when NULL.
Following this convention solves the issue.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Justin Chen <justinpopo6@xxxxxxxxx>
Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20200420190853.45614-6-kdasu.kdev@xxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/spi/spi-bcm-qspi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -670,7 +670,7 @@ static void read_from_hw(struct bcm_qspi
if (buf)
buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
dev_dbg(&qspi->pdev->dev, "RD %02x\n",
- buf ? buf[tp.byte] : 0xff);
+ buf ? buf[tp.byte] : 0x0);
} else {
u16 *buf = tp.trans->rx_buf;

@@ -678,7 +678,7 @@ static void read_from_hw(struct bcm_qspi
buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
slot);
dev_dbg(&qspi->pdev->dev, "RD %04x\n",
- buf ? buf[tp.byte] : 0xffff);
+ buf ? buf[tp.byte / 2] : 0x0);
}

update_qspi_trans_byte_count(qspi, &tp,
@@ -733,13 +733,13 @@ static int write_to_hw(struct bcm_qspi *
while (!tstatus && slot < MSPI_NUM_CDRAM) {
if (tp.trans->bits_per_word <= 8) {
const u8 *buf = tp.trans->tx_buf;
- u8 val = buf ? buf[tp.byte] : 0xff;
+ u8 val = buf ? buf[tp.byte] : 0x00;

write_txram_slot_u8(qspi, slot, val);
dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
} else {
const u16 *buf = tp.trans->tx_buf;
- u16 val = buf ? buf[tp.byte / 2] : 0xffff;
+ u16 val = buf ? buf[tp.byte / 2] : 0x0000;

write_txram_slot_u16(qspi, slot, val);
dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);