Re: [PATCH] ath10k: Wait until copy complete is actually done before completing

From: Kalle Valo
Date: Tue Jun 16 2020 - 04:11:39 EST


Douglas Anderson <dianders@xxxxxxxxxxxx> wrote:

> On wcn3990 we have "per_ce_irq = true". That makes the
> ath10k_ce_interrupt_summary() function always return 0xfff. The
> ath10k_ce_per_engine_service_any() function will see this and think
> that _all_ copy engines have an interrupt. Without checking, the
> ath10k_ce_per_engine_service() assumes that if it's called that the
> "copy complete" (cc) interrupt fired. This combination seems bad.
>
> Let's add a check to make sure that the "copy complete" interrupt
> actually fired in ath10k_ce_per_engine_service().
>
> This might fix a hard-to-reproduce failure where it appears that the
> copy complete handlers run before the copy is really complete.
> Specifically a symptom was that we were seeing this on a Qualcomm
> sc7180 board:
> arm-smmu 15000000.iommu: Unhandled context fault:
> fsr=0x402, iova=0x7fdd45780, fsynr=0x30003, cbfrsynra=0xc1, cb=10
>
> Even on platforms that don't have wcn3990 this still seems like it
> would be a sane thing to do. Specifically the current IRQ handler
> comments indicate that there might be other misc interrupt sources
> firing that need to be cleared. If one of those sources was the one
> that caused the IRQ handler to be called it would also be important to
> double-check that the interrupt we cared about actually fired.
>
> Tested-on: WCN3990 SNOC WLAN.HL.3.2.2-00490-QCAHLSWMTPL-1
>
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>

Patch applied to ath-next branch of ath.git, thanks.

8f9ed93d09a9 ath10k: Wait until copy complete is actually done before completing

--
https://patchwork.kernel.org/patch/11595887/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches