Re: [PATCH v2 1/3] dt-bindings: pinctrl: Convert ingenic,pinctrl.txt to YAML

[Paul Cercueil]

Hi Rob,

Le jeu. 28 mai 2020 à 15:42, Rob Herring <robh@xxxxxxxxxx> a écrit :
> On Wed, May 20, 2020 at 02:22:32AM +0200, Paul Cercueil wrote:
> >  Convert the ingenic,pinctrl.txt doc file to ingenic,pinctrl.yaml.
> >
> >  In the process, some compatible strings now require a fallback, as 
> > the
> >  corresponding SoCs are pin-compatible with their fallback variant.
> >
> >  Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> >  ---
> >
> >  Notes:
> >      v2: - Use 'pinctrl' instead of 'pin-controller' as the node name
> >          - remove 'additionalProperties: false' since we will have 
> > pin conf nodes
>
> You need to describe those nodes and not just allow anything.

These nodes don't have any constraint on their name, so I would need a 
wildcard property for children nodes. That's not something I can 
express in YAML right now, is it?

-Paul

> >   .../bindings/pinctrl/ingenic,pinctrl.txt      |  81 -----------
> >   .../bindings/pinctrl/ingenic,pinctrl.yaml     | 136 
> > ++++++++++++++++++
> >   2 files changed, 136 insertions(+), 81 deletions(-)
> >   delete mode 100644 
> > Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
> >   create mode 100644 
> > Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
>
>
> >  diff --git 
> > a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml 
> > b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
> >  new file mode 100644
> >  index 000000000000..5be2b1e95b36
> >  --- /dev/null
> >  +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
> >  @@ -0,0 +1,136 @@
> >  +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >  +%YAML 1.2
> >  +---
> >  +$id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml#
> >  +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >  +
> >  +title: Ingenic SoCs pin controller devicetree bindings
> >  +
> >  +description: >
> >  +  Please refer to pinctrl-bindings.txt in this directory for 
> > details of the
> >  +  common pinctrl bindings used by client devices, including the 
> > meaning of the
> >  +  phrase "pin configuration node".
> >  +
> >  +  For the Ingenic SoCs, pin control is tightly bound with GPIO 
> > ports. All pins
> >  +  may be used as GPIOs, multiplexed device functions are 
> > configured within the
> >  +  GPIO port configuration registers and it is typical to refer to 
> > pins using the
> >  +  naming scheme "PxN" where x is a character identifying the GPIO 
> > port with
> >  +  which the pin is associated and N is an integer from 0 to 31 
> > identifying the
> >  +  pin within that GPIO port. For example PA0 is the first pin in 
> > GPIO port A,
> >  +  and PB31 is the last pin in GPIO port B. The JZ4740, the X1000 
> > and the X1830
> >  +  contains 4 GPIO ports, PA to PD, for a total of 128 pins. The 
> > JZ4760, the
> >  +  JZ4770 and the JZ4780 contains 6 GPIO ports, PA to PF, for a 
> > total of 192
> >  +  pins.
> >  +
> >  +maintainers:
> >  +  - Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> >  +
> >  +properties:
> >  +  nodename:
>
> It's $nodename as that's not a real property. And that will expose the
> error in the example for you.
>
> >  +    pattern: "^pinctrl@[0-9a-f]+$"
> >  +
> >  +  compatible:
> >  +    oneOf:
> >  +      - enum:
> >  +        - ingenic,jz4740-pinctrl
> >  +        - ingenic,jz4725b-pinctrl
> >  +        - ingenic,jz4760-pinctrl
> >  +        - ingenic,jz4770-pinctrl
> >  +        - ingenic,jz4780-pinctrl
> >  +        - ingenic,x1000-pinctrl
> >  +        - ingenic,x1500-pinctrl
> >  +        - ingenic,x1830-pinctrl
> >  +      - items:
> >  +        - const: ingenic,jz4760b-pinctrl
> >  +        - const: ingenic,jz4760-pinctrl
> >  +      - items:
> >  +        - const: ingenic,x1000e-pinctrl
> >  +        - const: ingenic,x1000-pinctrl
> >  +
> >  +  reg:
> >  +    maxItems: 1
> >  +
> >  +  "#address-cells":
> >  +    const: 1
> >  +
> >  +  "#size-cells":
> >  +    const: 0
> >  +
> >  +patternProperties:
> >  +  "^gpio@[0-9]$":
> >  +    type: object
> >  +    properties:
> >  +      compatible:
> >  +        enum:
> >  +          - ingenic,jz4740-gpio
> >  +          - ingenic,jz4725b-gpio
> >  +          - ingenic,jz4760-gpio
> >  +          - ingenic,jz4770-gpio
> >  +          - ingenic,jz4780-gpio
> >  +          - ingenic,x1000-gpio
> >  +          - ingenic,x1500-gpio
> >  +          - ingenic,x1830-gpio
> >  +
> >  +      reg:
> >  +        items:
> >  +          - description: The GPIO bank number
> >  +
> >  +      gpio-controller: true
> >  +
> >  +      "#gpio-cells":
> >  +        const: 2
> >  +
> >  +      gpio-ranges:
> >  +        maxItems: 1
> >  +
> >  +      interrupt-controller: true
> >  +
> >  +      "#interrupt-cells":
> >  +        const: 2
> >  +        description:
> >  +          Refer to ../interrupt-controller/interrupts.txt for more 
> > details.
> >  +
> >  +      interrupts:
> >  +        maxItems: 1
> >  +
> >  +    required:
> >  +      - compatible
> >  +      - reg
> >  +      - gpio-controller
> >  +      - "#gpio-cells"
> >  +      - interrupts
> >  +      - interrupt-controller
> >  +      - "#interrupt-cells"
> >  +
> >  +    additionalProperties: false
> >  +
> >  +required:
> >  +  - compatible
> >  +  - reg
> >  +  - "#address-cells"
> >  +  - "#size-cells"
> >  +
> >  +examples:
> >  +  - |
> >  +    pin-controller@10010000 {
> >  +      compatible = "ingenic,jz4770-pinctrl";
> >  +      reg = <0x10010000 0x600>;
> >  +
> >  +      #address-cells = <1>;
> >  +      #size-cells = <0>;
> >  +
> >  +      gpio@0 {
> >  +        compatible = "ingenic,jz4770-gpio";
> >  +        reg = <0>;
> >  +
> >  +        gpio-controller;
> >  +        gpio-ranges = <&pinctrl 0 0 32>;
> >  +        #gpio-cells = <2>;
> >  +
> >  +        interrupt-controller;
> >  +        #interrupt-cells = <2>;
> >  +
> >  +        interrupt-parent = <&intc>;
> >  +        interrupts = <17>;
> >  +      };
> >  +    };
> >  --
> >  2.26.2