[net-next 6/6] dt-bindings: marvell,prestera: Add description for device-tree bindings

From: Vadym Kochan
Date: Thu May 28 2020 - 11:14:21 EST


Add brief description how to configure base mac address binding in
device-tree.

Describe requirement for the PCI port which is connected to the ASIC, to
allow access to the firmware related registers.

Signed-off-by: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
---
.../bindings/net/marvell,prestera.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
index 83370ebf5b89..e28938ddfdf5 100644
--- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -45,3 +45,37 @@ dfx-server {
ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
};
+
+Marvell Prestera SwitchDev bindings
+-----------------------------------
+Optional properties:
+- compatible: must be "marvell,prestera"
+- base-mac-provider: describes handle to node which provides base mac address,
+ might be a static base mac address or nvme cell provider.
+
+Example:
+
+eeprom_mac_addr: eeprom-mac-addr {
+ compatible = "eeprom,mac-addr-cell";
+ status = "okay";
+
+ nvmem = <&eeprom_at24>;
+};
+
+prestera {
+ compatible = "marvell,prestera";
+ status = "okay";
+
+ base-mac-provider = <&eeprom_mac_addr>;
+};
+
+The current implementation of Prestera Switchdev PCI interface driver requires
+that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range:
+
+&cp0_pcie0 {
+ ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000
+ 0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000
+ 0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>;
+ phys = <&cp0_comphy0 0>;
+ status = "okay";
+};
--
2.17.1