Re: [Patch 2/2] media: ti-vpe: Add the VIP driver

From: Hans Verkuil
Date: Thu May 28 2020 - 04:09:20 EST


On 26/05/2020 23:57, Benoit Parrot wrote:
> Hans,
>
> Thanks for the review.
>
> Hans Verkuil <hverkuil@xxxxxxxxx> wrote on Tue [2020-May-26 13:48:35 +0200]:
>> On 23/05/2020 00:54, Benoit Parrot wrote:
>>> VIP stands for Video Input Port, it can be found on devices such as
>>> DRA7xx and provides a parallel interface to a video source such as
>>> a sensor or TV decoder. Each VIP can support two inputs (slices) and
>>> a SoC can be configured with a variable number of VIP's.
>>> Each slice can supports two ports each connected to its own
>>> sub-device.
>>>
>>> Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
>>> Signed-off-by: Nikhil Devshatwar <nikhil.nd@xxxxxx>
>>> ---
>>> drivers/media/platform/Kconfig | 13 +
>>> drivers/media/platform/ti-vpe/Makefile | 2 +
>>> drivers/media/platform/ti-vpe/vip.c | 4158 ++++++++++++++++++++++++
>>> drivers/media/platform/ti-vpe/vip.h | 724 +++++
>>> 4 files changed, 4897 insertions(+)
>>> create mode 100644 drivers/media/platform/ti-vpe/vip.c
>>> create mode 100644 drivers/media/platform/ti-vpe/vip.h
>>>

<snip>

>>> +static int vip_enum_fmt_vid_cap(struct file *file, void *priv,
>>> + struct v4l2_fmtdesc *f)
>>> +{
>>> + struct vip_stream *stream = file2stream(file);
>>> + struct vip_port *port = stream->port;
>>> + struct vip_fmt *fmt;
>>> +
>>> + vip_dbg(3, stream, "enum_fmt index:%d\n", f->index);
>>> + if (f->index >= port->num_active_fmt)
>>> + return -EINVAL;
>>> +
>>> + fmt = port->active_fmt[f->index];
>>> +
>>> + f->pixelformat = fmt->fourcc;
>>> + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>>
>> No need to set the type field.
>
> Ok.
>
>>
>>> + vip_dbg(3, stream, "enum_fmt fourcc:%s\n",
>>> + fourcc_to_str(f->pixelformat));
>>
>> Excessive debugging.
>
> Why excessive?

Two debug messages for a simple function like this seems overkill.

Besides, the v4l2 core already has debugging support for ioctl calls:

https://linuxtv.org/downloads/v4l-dvb-apis-new/driver-api/v4l2-dev.html#video-device-debugging

>
>>
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int vip_enum_framesizes(struct file *file, void *priv,
>>> + struct v4l2_frmsizeenum *f)
>>> +{
>>> + struct vip_stream *stream = file2stream(file);
>>> + struct vip_port *port = stream->port;
>>> + struct vip_fmt *fmt;
>>> + struct v4l2_subdev_frame_size_enum fse;
>>> + int ret;
>>> +
>>> + fmt = find_port_format_by_pix(port, f->pixel_format);
>>> + if (!fmt)
>>> + return -EINVAL;
>>> +
>>> + fse.index = f->index;
>>> + fse.pad = port->source_pad;
>>> + fse.code = fmt->code;
>>> + fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>> + ret = v4l2_subdev_call(port->subdev, pad, enum_frame_size, NULL, &fse);
>>> + if (ret == -ENOIOCTLCMD && !f->index) {
>>> + /*
>>> + * if subdev does not support enum_frame_size
>>> + * then use get_fmt
>>
>> I don't think that's right. If the subdev doesn't support this, then
>> this ioctl should be disabled altogether. Typically this ioctl is only
>> valid for sensor subdevs, not for video receivers.
>>
>> Use v4l2_subdev_has_op() and v4l2_disable_ioctl().
>
> You mean to check if the subdev support this ioctl and if not disable it
> for the current video device only, correct?

Correct.

There are several other drivers that do this, just grep for them.

>>> +static int vip_calc_format_size(struct vip_port *port,
>>> + struct vip_fmt *fmt,
>>> + struct v4l2_format *f)
>>> +{
>>> + enum v4l2_field *field;
>>> + unsigned int stride;
>>> +
>>> + if (!fmt) {
>>> + vip_dbg(2, port,
>>> + "no vip_fmt format provided!\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + field = &f->fmt.pix.field;
>>> + if (*field == V4L2_FIELD_ANY)
>>> + *field = V4L2_FIELD_NONE;
>>> + else if (V4L2_FIELD_NONE != *field && V4L2_FIELD_ALTERNATE != *field)
>>> + return -EINVAL;
>>> +
>>> + v4l_bound_align_image(&f->fmt.pix.width, MIN_W, MAX_W, W_ALIGN,
>>> + &f->fmt.pix.height, MIN_H, MAX_H, H_ALIGN,
>>> + S_ALIGN);
>>> +
>>> + stride = f->fmt.pix.width * (fmt->vpdma_fmt[0]->depth >> 3);
>>> + if (stride > f->fmt.pix.bytesperline)
>>> + f->fmt.pix.bytesperline = stride;
>>> +
>>> + f->fmt.pix.bytesperline = clamp_t(u32, f->fmt.pix.bytesperline,
>>> + stride, VPDMA_MAX_STRIDE);
>>> + f->fmt.pix.bytesperline = ALIGN(f->fmt.pix.bytesperline,
>>> + VPDMA_STRIDE_ALIGN);
>>> +
>>> + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
>>> + if (fmt->coplanar) {
>>> + f->fmt.pix.sizeimage += f->fmt.pix.height *
>>> + f->fmt.pix.bytesperline *
>>> + fmt->vpdma_fmt[VIP_CHROMA]->depth >> 3;
>>> + }
>>> +
>>> + f->fmt.pix.colorspace = fmt->colorspace;
>>> + f->fmt.pix.priv = 0;
>>
>> No need to set this.
>
> You mean pix.priv? I thought I remember v4l2-compliance complaining about
> something like this?

Yes, pix.priv. It used to complain a long time ago, but the v4l2 core should
handle this. Basically drivers shouldn't touch pix.priv.

>
>>
>>> +
>>> + vip_dbg(3, port, "calc_format_size: fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
>>> + fourcc_to_str(f->fmt.pix.pixelformat),
>>> + f->fmt.pix.width, f->fmt.pix.height,
>>> + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static inline bool vip_is_size_dma_aligned(u32 bpp, u32 width)
>>> +{
>>> + return ((width * bpp) == ALIGN(width * bpp, VPDMA_STRIDE_ALIGN));
>>> +}
>>> +
>>> +static int vip_try_fmt_vid_cap(struct file *file, void *priv,
>>> + struct v4l2_format *f)
>>> +{
>>> + struct vip_stream *stream = file2stream(file);
>>> + struct vip_port *port = stream->port;
>>> + struct v4l2_subdev_frame_size_enum fse;
>>> + struct vip_fmt *fmt;
>>> + u32 best_width, best_height, largest_width, largest_height;
>>> + int ret, found;
>>> + enum vip_csc_state csc_direction;
>>> +
>>> + vip_dbg(3, stream, "try_fmt fourcc:%s size: %dx%d\n",
>>> + fourcc_to_str(f->fmt.pix.pixelformat),
>>> + f->fmt.pix.width, f->fmt.pix.height);
>>> +
>>> + fmt = find_port_format_by_pix(port, f->fmt.pix.pixelformat);
>>> + if (!fmt) {
>>> + vip_dbg(2, stream,
>>> + "Fourcc format (0x%08x) not found.\n",
>>> + f->fmt.pix.pixelformat);
>>> +
>>> + /* Just get the first one enumerated */
>>> + fmt = port->active_fmt[0];
>>> + f->fmt.pix.pixelformat = fmt->fourcc;
>>> + }
>>> +
>>> + csc_direction = vip_csc_direction(fmt->code, fmt->finfo);
>>> + if (csc_direction != VIP_CSC_NA) {
>>> + if (!is_csc_available(port)) {
>>> + vip_dbg(2, stream,
>>> + "CSC not available for Fourcc format (0x%08x).\n",
>>> + f->fmt.pix.pixelformat);
>>> +
>>> + /* Just get the first one enumerated */
>>> + fmt = port->active_fmt[0];
>>> + f->fmt.pix.pixelformat = fmt->fourcc;
>>> + /* re-evaluate the csc_direction here */
>>> + csc_direction = vip_csc_direction(fmt->code,
>>> + fmt->finfo);
>>> + } else {
>>> + vip_dbg(3, stream, "CSC active on Port %c: going %s\n",
>>> + port->port_id == VIP_PORTA ? 'A' : 'B',
>>> + (csc_direction == VIP_CSC_Y2R) ? "Y2R" : "R2Y");
>>> + }
>>> + }
>>> +
>>> + /*
>>> + * Given that sensors might support multiple mbus code we need
>>> + * to use the one that matches the requested pixel format
>>> + */
>>> + port->try_mbus_framefmt = port->mbus_framefmt;
>>> + port->try_mbus_framefmt.code = fmt->code;
>>> +
>>> + /* check for/find a valid width/height */
>>> + ret = 0;
>>> + found = false;
>>> + best_width = 0;
>>> + best_height = 0;
>>> + largest_width = 0;
>>> + largest_height = 0;
>>> + fse.pad = port->source_pad;
>>> + fse.code = fmt->code;
>>> + fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>> + for (fse.index = 0; ; fse.index++) {
>>> + u32 bpp = fmt->vpdma_fmt[0]->depth >> 3;
>>> +
>>> + ret = v4l2_subdev_call(port->subdev, pad,
>>> + enum_frame_size, NULL, &fse);
>>> + if (ret == -ENOIOCTLCMD) {
>>> + /*
>>> + * if subdev does not support enum_frame_size
>>> + * then just try to set_fmt directly
>>> + */
>>> + struct v4l2_subdev_format format = {
>>> + .which = V4L2_SUBDEV_FORMAT_TRY,
>>> + };
>>> + struct v4l2_subdev_pad_config *pad_cfg;
>>> +
>>> + pad_cfg = v4l2_subdev_alloc_pad_config(port->subdev);
>>> + if (!pad_cfg)
>>> + return -ENOMEM;
>>> +
>>> + v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
>>> + fmt->code);
>>> + ret = v4l2_subdev_call(port->subdev, pad, set_fmt,
>>> + pad_cfg, &format);
>>> + if (ret)
>>> + /* here regardless of the reason we give up */
>>> + break;
>>> +
>>> + if (f->fmt.pix.width == format.format.width &&
>>> + f->fmt.pix.height == format.format.height) {
>>> + found = true;
>>> + vip_dbg(3, stream, "try_fmt loop:%d found direct match: %dx%d\n",
>>> + fse.index, format.format.width,
>>> + format.format.height);
>>> + }
>>> + largest_width = format.format.width;
>>> + largest_height = format.format.height;
>>> + best_width = format.format.width;
>>> + best_height = format.format.height;
>>> +
>>> + v4l2_subdev_free_pad_config(pad_cfg);
>>> + break;
>>> +
>>> + } else if (ret) {
>>> + break;
>>> + }
>>> +
>>> + vip_dbg(3, stream, "try_fmt loop:%d fourcc:%s size: %dx%d\n",
>>> + fse.index, fourcc_to_str(f->fmt.pix.pixelformat),
>>> + fse.max_width, fse.max_height);
>>> +
>>> + if (!vip_is_size_dma_aligned(bpp, fse.max_width))
>>> + continue;
>>> +
>>> + if ((fse.max_width >= largest_width) &&
>>> + (fse.max_height >= largest_height)) {
>>> + vip_dbg(3, stream, "try_fmt loop:%d found new larger: %dx%d\n",
>>> + fse.index, fse.max_width, fse.max_height);
>>> + largest_width = fse.max_width;
>>> + largest_height = fse.max_height;
>>> + }
>>> +
>>> + if ((fse.max_width >= f->fmt.pix.width) &&
>>> + (fse.max_height >= f->fmt.pix.height)) {
>>> + vip_dbg(3, stream, "try_fmt loop:%d found at least larger: %dx%d\n",
>>> + fse.index, fse.max_width, fse.max_height);
>>> +
>>> + if (!best_width ||
>>> + ((abs(best_width - f->fmt.pix.width) >=
>>> + abs(fse.max_width - f->fmt.pix.width)) &&
>>> + (abs(best_height - f->fmt.pix.height) >=
>>> + abs(fse.max_height - f->fmt.pix.height)))) {
>>> + best_width = fse.max_width;
>>> + best_height = fse.max_height;
>>> + vip_dbg(3, stream, "try_fmt loop:%d found new best: %dx%d\n",
>>> + fse.index, fse.max_width,
>>> + fse.max_height);
>>> + }
>>> + }
>>> +
>>> + if ((f->fmt.pix.width == fse.max_width) &&
>>> + (f->fmt.pix.height == fse.max_height)) {
>>> + found = true;
>>> + vip_dbg(3, stream, "try_fmt loop:%d found direct match: %dx%d\n",
>>> + fse.index, fse.max_width,
>>> + fse.max_height);
>>> + break;
>>> + }
>>> +
>>> + if ((f->fmt.pix.width >= fse.min_width) &&
>>> + (f->fmt.pix.width <= fse.max_width) &&
>>> + (f->fmt.pix.height >= fse.min_height) &&
>>> + (f->fmt.pix.height <= fse.max_height)) {
>>> + found = true;
>>> + vip_dbg(3, stream, "try_fmt loop:%d found direct range match: %dx%d\n",
>>> + fse.index, fse.max_width,
>>> + fse.max_height);
>>> + break;
>>> + }
>>> + }
>>> +
>>> + if (found) {
>>> + port->try_mbus_framefmt.width = f->fmt.pix.width;
>>> + port->try_mbus_framefmt.height = f->fmt.pix.height;
>>> + /* No need to check for scaling */
>>> + goto calc_size;
>>> + } else if (largest_width && f->fmt.pix.width > largest_width) {
>>> + port->try_mbus_framefmt.width = largest_width;
>>> + port->try_mbus_framefmt.height = largest_height;
>>> + } else if (best_width) {
>>> + port->try_mbus_framefmt.width = best_width;
>>> + port->try_mbus_framefmt.height = best_height;
>>> + } else {
>>> + /* use existing values as default */
>>> + }
>>> +
>>> + vip_dbg(3, stream, "try_fmt best subdev size: %dx%d\n",
>>> + port->try_mbus_framefmt.width,
>>> + port->try_mbus_framefmt.height);
>>> +
>>> + if (is_scaler_available(port) &&
>>> + csc_direction != VIP_CSC_Y2R &&
>>> + !vip_is_mbuscode_raw(fmt->code) &&
>>> + f->fmt.pix.height <= port->try_mbus_framefmt.height &&
>>> + port->try_mbus_framefmt.height <= SC_MAX_PIXEL_HEIGHT &&
>>> + port->try_mbus_framefmt.width <= SC_MAX_PIXEL_WIDTH) {
>>> + /*
>>> + * Scaler is only accessible if the dst colorspace is YUV.
>>> + * As the input to the scaler must be in YUV mode only.
>>> + *
>>> + * Scaling up is allowed only horizontally.
>>> + */
>>> + unsigned int hratio, vratio, width_align, height_align;
>>> + u32 bpp = fmt->vpdma_fmt[0]->depth >> 3;
>>> +
>>> + vip_dbg(3, stream, "Scaler active on Port %c: requesting %dx%d\n",
>>> + port->port_id == VIP_PORTA ? 'A' : 'B',
>>> + f->fmt.pix.width, f->fmt.pix.height);
>>> +
>>> + /* Just make sure everything is properly aligned */
>>> + width_align = ALIGN(f->fmt.pix.width * bpp, VPDMA_STRIDE_ALIGN);
>>> + width_align /= bpp;
>>> + height_align = ALIGN(f->fmt.pix.height, 2);
>>> +
>>> + f->fmt.pix.width = width_align;
>>> + f->fmt.pix.height = height_align;
>>> +
>>> + hratio = f->fmt.pix.width * 1000 /
>>> + port->try_mbus_framefmt.width;
>>> + vratio = f->fmt.pix.height * 1000 /
>>> + port->try_mbus_framefmt.height;
>>> + if (hratio < 125) {
>>> + f->fmt.pix.width = port->try_mbus_framefmt.width / 8;
>>> + vip_dbg(3, stream, "Horizontal scaling ratio out of range adjusting -> %d\n",
>>> + f->fmt.pix.width);
>>> + }
>>> +
>>> + if (vratio < 188) {
>>> + f->fmt.pix.height = port->try_mbus_framefmt.height / 4;
>>> + vip_dbg(3, stream, "Vertical scaling ratio out of range adjusting -> %d\n",
>>> + f->fmt.pix.height);
>>> + }
>>> + vip_dbg(3, stream, "Scaler: got %dx%d\n",
>>> + f->fmt.pix.width, f->fmt.pix.height);
>>> + } else {
>>> + /* use existing values as default */
>>> + f->fmt.pix.width = port->try_mbus_framefmt.width;
>>> + f->fmt.pix.height = port->try_mbus_framefmt.height;
>>> + }
>>> +
>>> +calc_size:
>>> + /* That we have a fmt calculate imagesize and bytesperline */
>>> + return vip_calc_format_size(port, fmt, f);
>>> +}
>>> +
>>> +static int vip_g_fmt_vid_cap(struct file *file, void *priv,
>>> + struct v4l2_format *f)
>>> +{
>>> + struct vip_stream *stream = file2stream(file);
>>> + struct vip_port *port = stream->port;
>>> + struct vip_fmt *fmt = port->fmt;
>>> +
>>> + /* Use last known values or defaults */
>>> + f->fmt.pix.width = stream->width;
>>> + f->fmt.pix.height = stream->height;
>>> + f->fmt.pix.pixelformat = port->fmt->fourcc;
>>> + f->fmt.pix.field = stream->sup_field;
>>> + f->fmt.pix.colorspace = port->fmt->colorspace;
>>> + f->fmt.pix.bytesperline = stream->bytesperline;
>>> + f->fmt.pix.sizeimage = stream->sizeimage;
>>> +
>>> + vip_dbg(3, stream,
>>> + "g_fmt fourcc:%s code: %04x size: %dx%d bpl:%d img_size:%d\n",
>>> + fourcc_to_str(f->fmt.pix.pixelformat),
>>> + fmt->code,
>>> + f->fmt.pix.width, f->fmt.pix.height,
>>> + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
>>> + vip_dbg(3, stream, "g_fmt vpdma data type: 0x%02X\n",
>>> + port->fmt->vpdma_fmt[0]->data_type);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int vip_s_fmt_vid_cap(struct file *file, void *priv,
>>> + struct v4l2_format *f)
>>> +{
>>> + struct vip_stream *stream = file2stream(file);
>>> + struct vip_port *port = stream->port;
>>> + struct v4l2_subdev_format sfmt;
>>> + struct v4l2_mbus_framefmt *mf;
>>> + enum vip_csc_state csc_direction;
>>> + int ret;
>>> +
>>> + vip_dbg(3, stream, "s_fmt input fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
>>> + fourcc_to_str(f->fmt.pix.pixelformat),
>>> + f->fmt.pix.width, f->fmt.pix.height,
>>> + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
>>> +
>>> + ret = vip_try_fmt_vid_cap(file, priv, f);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + vip_dbg(3, stream, "s_fmt try_fmt fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
>>> + fourcc_to_str(f->fmt.pix.pixelformat),
>>> + f->fmt.pix.width, f->fmt.pix.height,
>>> + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
>>> +
>>> + if (vb2_is_busy(&stream->vb_vidq)) {
>>> + vip_err(stream, "%s queue busy\n", __func__);
>>> + return -EBUSY;
>>> + }
>>> +
>>> + /*
>>> + * Check if we need the scaler or not
>>> + *
>>> + * Since on previous S_FMT call the scaler might have been
>>> + * allocated if it is not needed in this instance we will
>>> + * attempt to free it just in case.
>>> + *
>>> + * free_scaler() is harmless unless the current port
>>> + * allocated it.
>>> + */
>>> + if (f->fmt.pix.width == port->try_mbus_framefmt.width &&
>>> + f->fmt.pix.height == port->try_mbus_framefmt.height)
>>> + free_scaler(port);
>>> + else
>>> + allocate_scaler(port);
>>> +
>>> + port->fmt = find_port_format_by_pix(port,
>>> + f->fmt.pix.pixelformat);
>>> + stream->width = f->fmt.pix.width;
>>> + stream->height = f->fmt.pix.height;
>>> + stream->bytesperline = f->fmt.pix.bytesperline;
>>> + stream->sizeimage = f->fmt.pix.sizeimage;
>>> + stream->sup_field = f->fmt.pix.field;
>>> + stream->field = f->fmt.pix.field;
>>> +
>>> + port->c_rect.left = 0;
>>> + port->c_rect.top = 0;
>>> + port->c_rect.width = stream->width;
>>> + port->c_rect.height = stream->height;
>>> +
>>> + /*
>>> + * Check if we need the csc unit or not
>>> + *
>>> + * Since on previous S_FMT call, the csc might have been
>>> + * allocated if it is not needed in this instance we will
>>> + * attempt to free it just in case.
>>> + *
>>> + * free_csc() is harmless unless the current port
>>> + * allocated it.
>>> + */
>>> + csc_direction = vip_csc_direction(port->fmt->code, port->fmt->finfo);
>>> + if (csc_direction == VIP_CSC_NA)
>>> + free_csc(port);
>>> + else
>>> + allocate_csc(port, csc_direction);
>>> +
>>> + if (stream->sup_field == V4L2_FIELD_ALTERNATE)
>>> + port->flags |= FLAG_INTERLACED;
>>> + else
>>> + port->flags &= ~FLAG_INTERLACED;
>>> +
>>> + vip_dbg(3, stream, "s_fmt fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
>>> + fourcc_to_str(f->fmt.pix.pixelformat),
>>> + f->fmt.pix.width, f->fmt.pix.height,
>>> + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
>>> +
>>> + mf = &sfmt.format;
>>> + v4l2_fill_mbus_format(mf, &f->fmt.pix, port->fmt->code);
>>> + /* Make sure to use the subdev size found in the try_fmt */
>>> + mf->width = port->try_mbus_framefmt.width;
>>> + mf->height = port->try_mbus_framefmt.height;
>>> +
>>> + vip_dbg(3, stream, "s_fmt pix_to_mbus mbus_code: %04X size: %dx%d\n",
>>> + mf->code,
>>> + mf->width, mf->height);
>>> +
>>> + sfmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>> + sfmt.pad = port->source_pad;
>>> + ret = v4l2_subdev_call(port->subdev, pad, set_fmt, NULL, &sfmt);
>>> + if (ret) {
>>> + vip_dbg(1, stream, "set_fmt failed in subdev\n");
>>> + return ret;
>>> + }
>>> +
>>> + /* Save it */
>>> + port->mbus_framefmt = *mf;
>>> +
>>> + vip_dbg(3, stream, "s_fmt subdev fmt mbus_code: %04X size: %dx%d\n",
>>> + port->mbus_framefmt.code,
>>> + port->mbus_framefmt.width, port->mbus_framefmt.height);
>>> + vip_dbg(3, stream, "s_fmt vpdma data type: 0x%02X\n",
>>> + port->fmt->vpdma_fmt[0]->data_type);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/*
>>> + * Does the exact opposite of set_fmt_params
>>> + * It makes sure the DataPath register is sane after tear down
>>> + */
>>> +static void unset_fmt_params(struct vip_stream *stream)
>>> +{
>>> + struct vip_dev *dev = stream->port->dev;
>>> + struct vip_port *port = stream->port;
>>> +
>>> + stream->sequence = 0;
>>> + if (stream->port->flags & FLAG_INTERLACED)
>>> + stream->field = V4L2_FIELD_TOP;
>>> +
>>> + if (port->csc == VIP_CSC_Y2R) {
>>> + if (port->port_id == VIP_PORTA) {
>>> + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_SRC_DATA_SELECT, 0);
>>> + } else {
>>> + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
>>> + }
>>> + /* We are done */
>>> + return;
>>> + } else if (port->csc == VIP_CSC_R2Y) {
>>> + if (port->scaler && port->fmt->coplanar) {
>>> + if (port->port_id == VIP_PORTA) {
>>> + vip_set_slice_path(dev,
>>> + VIP_CSC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_SC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT,
>>> + 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_RGB_OUT_HI_DATA_SELECT,
>>> + 0);
>>> + }
>>> + } else if (port->scaler) {
>>> + if (port->port_id == VIP_PORTA) {
>>> + vip_set_slice_path(dev,
>>> + VIP_CSC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_SC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT,
>>> + 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_RGB_OUT_HI_DATA_SELECT,
>>> + 0);
>>> + }
>>> + } else if (port->fmt->coplanar) {
>>> + if (port->port_id == VIP_PORTA) {
>>> + vip_set_slice_path(dev,
>>> + VIP_CSC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT,
>>> + 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_RGB_OUT_HI_DATA_SELECT,
>>> + 0);
>>> + }
>>> + } else {
>>> + if (port->port_id == VIP_PORTA) {
>>> + vip_set_slice_path(dev,
>>> + VIP_CSC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT,
>>> + 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_RGB_OUT_HI_DATA_SELECT,
>>> + 0);
>>> + }
>>> + }
>>> + /* We are done */
>>> + return;
>>> + } else if (v4l2_is_format_rgb(port->fmt->finfo)) {
>>> + if (port->port_id == VIP_PORTA) {
>>> + vip_set_slice_path(dev,
>>> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
>>> + }
>>> + /* We are done */
>>> + return;
>>> + }
>>> +
>>> + if (port->scaler && port->fmt->coplanar) {
>>> + if (port->port_id == VIP_PORTA) {
>>> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
>>> + } else {
>>> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_2_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
>>> + }
>>> + } else if (port->scaler) {
>>> + if (port->port_id == VIP_PORTA) {
>>> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
>>> + } else {
>>> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_2_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
>>> + }
>>> + } else if (port->fmt->coplanar) {
>>> + if (port->port_id == VIP_PORTA) {
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
>>> + } else {
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_2_SRC_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
>>> + }
>>> + } else {
>>> + /*
>>> + * We undo all data path setting except for the multi
>>> + * stream case.
>>> + * Because we cannot disrupt other on-going capture if only
>>> + * one stream is terminated the other might still be going
>>> + */
>>> + vip_set_slice_path(dev, VIP_MULTI_CHANNEL_DATA_SELECT, 1);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
>>> + }
>>> +}
>>> +
>>> +/*
>>> + * Set the registers that are modified when the video format changes.
>>> + */
>>> +static void set_fmt_params(struct vip_stream *stream)
>>> +{
>>
>> Hmm, this is a *very* long function. Perhaps this could be split up a bit,
>> or reorganized?
>
> Yeah, I'll start by removing the extra comment lines and reformat it.
>
>>
>>> + struct vip_dev *dev = stream->port->dev;
>>> + struct vip_port *port = stream->port;
>>> +
>>> + stream->sequence = 0;
>>> + if (stream->port->flags & FLAG_INTERLACED)
>>> + stream->field = V4L2_FIELD_TOP;
>>> +
>>> + if (port->csc == VIP_CSC_Y2R) {
>>> + port->flags &= ~FLAG_MULT_PORT;
>>> + /* Set alpha component in background color */
>>> + vpdma_set_bg_color(dev->shared->vpdma,
>>> + (struct vpdma_data_format *)
>>> + port->fmt->vpdma_fmt[0],
>>> + 0xff);
>>> + if (port->port_id == VIP_PORTA) {
>>> + /*
>>> + * Input A: YUV422
>>> + * Output: Y_UP/UV_UP: RGB
>>> + * CSC_SRC_SELECT = 1
>>> + * RGB_OUT_HI_SELECT = 1
>>> + * RGB_SRC_SELECT = 1
>>> + * MULTI_CHANNEL_SELECT = 0
>>
>> It's a bit pointless to comment what the register values should be when you
>> set them in the code below. I'd drop that part, it will make the code
>> shorter.
>
> Ok.
>
>>
>>> + */
>>> + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 1);
>>> + vip_set_slice_path(dev,
>>> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
>>
>> For readability purposes I think it is better to keep this on one line. Same for
>> the other vip_set_slice_path calls.
>
> Ok.
>
>>
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 1);
>>> + vip_set_slice_path(dev, VIP_RGB_SRC_DATA_SELECT, 1);
>>> + } else {
>>> + /*
>>> + * Input B: YUV422
>>> + * Output: Y_UP/UV_UP: RGB
>>> + * CSC_SRC_SELECT = 2
>>> + * RGB_OUT_LO_SELECT = 1
>>> + * MULTI_CHANNEL_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 2);
>>> + vip_set_slice_path(dev,
>>> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 1);
>>> + }
>>> + /* We are done */
>>> + return;
>>> + } else if (port->csc == VIP_CSC_R2Y) {
>>> + port->flags &= ~FLAG_MULT_PORT;
>>> + if (port->scaler && port->fmt->coplanar) {
>>> + if (port->port_id == VIP_PORTA) {
>>> + /*
>>> + * Input A: RGB
>>> + * Output: Y_UP/UV_UP: Scaled YUV420
>>> + * CSC_SRC_SELECT = 4
>>> + * SC_SRC_SELECT = 1
>>> + * CHR_DS_1_SRC_SELECT = 1
>>> + * CHR_DS_1_BYPASS = 0
>>> + * RGB_OUT_HI_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev,
>>> + VIP_CSC_SRC_DATA_SELECT, 4);
>>> + vip_set_slice_path(dev,
>>> + VIP_SC_SRC_DATA_SELECT, 1);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT,
>>> + 1);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_RGB_OUT_HI_DATA_SELECT,
>>> + 0);
>>> + } else {
>>> + vip_err(stream, "RGB sensor can only be on Port A\n");
>>> + }
>>> + } else if (port->scaler) {
>>> + if (port->port_id == VIP_PORTA) {
>>> + /*
>>> + * Input A: RGB
>>> + * Output: Y_UP: Scaled YUV422
>>> + * CSC_SRC_SELECT = 4
>>> + * SC_SRC_SELECT = 1
>>> + * CHR_DS_1_SRC_SELECT = 1
>>> + * CHR_DS_1_BYPASS = 1
>>> + * RGB_OUT_HI_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev,
>>> + VIP_CSC_SRC_DATA_SELECT, 4);
>>> + vip_set_slice_path(dev,
>>> + VIP_SC_SRC_DATA_SELECT, 1);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT,
>>> + 1);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_DATA_BYPASS, 1);
>>> + vip_set_slice_path(dev,
>>> + VIP_RGB_OUT_HI_DATA_SELECT,
>>> + 0);
>>> + } else {
>>> + vip_err(stream, "RGB sensor can only be on Port A\n");
>>> + }
>>> + } else if (port->fmt->coplanar) {
>>> + if (port->port_id == VIP_PORTA) {
>>> + /*
>>> + * Input A: RGB
>>> + * Output: Y_UP/UV_UP: YUV420
>>> + * CSC_SRC_SELECT = 4
>>> + * CHR_DS_1_SRC_SELECT = 2
>>> + * CHR_DS_1_BYPASS = 0
>>> + * RGB_OUT_HI_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev,
>>> + VIP_CSC_SRC_DATA_SELECT, 4);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT,
>>> + 2);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_RGB_OUT_HI_DATA_SELECT,
>>> + 0);
>>> + } else {
>>> + vip_err(stream, "RGB sensor can only be on Port A\n");
>>> + }
>>> + } else {
>>> + if (port->port_id == VIP_PORTA) {
>>> + /*
>>> + * Input A: RGB
>>> + * Output: Y_UP/UV_UP: YUV420
>>> + * CSC_SRC_SELECT = 4
>>> + * CHR_DS_1_SRC_SELECT = 2
>>> + * CHR_DS_1_BYPASS = 1
>>> + * RGB_OUT_HI_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev,
>>> + VIP_CSC_SRC_DATA_SELECT, 4);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT,
>>> + 2);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_DATA_BYPASS, 1);
>>> + vip_set_slice_path(dev,
>>> + VIP_RGB_OUT_HI_DATA_SELECT,
>>> + 0);
>>> + } else {
>>> + vip_err(stream, "RGB sensor can only be on Port A\n");
>>> + }
>>> + }
>>> + /* We are done */
>>> + return;
>>> + } else if (v4l2_is_format_rgb(port->fmt->finfo)) {
>>> + port->flags &= ~FLAG_MULT_PORT;
>>> + /* Set alpha component in background color */
>>> + vpdma_set_bg_color(dev->shared->vpdma,
>>> + (struct vpdma_data_format *)
>>> + port->fmt->vpdma_fmt[0],
>>> + 0xff);
>>> + if (port->port_id == VIP_PORTA) {
>>> + /*
>>> + * Input A: RGB
>>> + * Output: Y_LO/UV_LO: RGB
>>> + * RGB_OUT_LO_SELECT = 1
>>> + * MULTI_CHANNEL_SELECT = 1
>>> + */
>>> + vip_set_slice_path(dev,
>>> + VIP_MULTI_CHANNEL_DATA_SELECT, 1);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 1);
>>> + } else {
>>> + vip_err(stream, "RGB sensor can only be on Port A\n");
>>> + }
>>> + /* We are done */
>>> + return;
>>> + }
>>> +
>>> + if (port->scaler && port->fmt->coplanar) {
>>> + port->flags &= ~FLAG_MULT_PORT;
>>> + if (port->port_id == VIP_PORTA) {
>>> + /*
>>> + * Input A: YUV422
>>> + * Output: Y_UP/UV_UP: Scaled YUV420
>>> + * SC_SRC_SELECT = 2
>>> + * CHR_DS_1_SRC_SELECT = 1
>>> + * CHR_DS_1_BYPASS = 0
>>> + * RGB_OUT_HI_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 2);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT, 1);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
>>> + } else {
>>> + /*
>>> + * Input B: YUV422
>>> + * Output: Y_LO/UV_LO: Scaled YUV420
>>> + * SC_SRC_SELECT = 3
>>> + * CHR_DS_2_SRC_SELECT = 1
>>> + * RGB_OUT_LO_SELECT = 0
>>> + * MULTI_CHANNEL_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 3);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_2_SRC_DATA_SELECT, 1);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
>>> + }
>>> + } else if (port->scaler) {
>>> + port->flags &= ~FLAG_MULT_PORT;
>>> + if (port->port_id == VIP_PORTA) {
>>> + /*
>>> + * Input A: YUV422
>>> + * Output: Y_UP: Scaled YUV422
>>> + * SC_SRC_SELECT = 2
>>> + * CHR_DS_1_SRC_SELECT = 1
>>> + * CHR_DS_1_BYPASS = 1
>>> + * RGB_OUT_HI_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 2);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT, 1);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 1);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
>>> + } else {
>>> + /*
>>> + * Input B: YUV422
>>> + * Output: UV_UP: Scaled YUV422
>>> + * SC_SRC_SELECT = 3
>>> + * CHR_DS_2_SRC_SELECT = 1
>>> + * CHR_DS_1_BYPASS = 1
>>> + * CHR_DS_2_BYPASS = 1
>>> + * RGB_OUT_HI_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 3);
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_2_SRC_DATA_SELECT, 1);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 1);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 1);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
>>> + }
>>> + } else if (port->fmt->coplanar) {
>>> + port->flags &= ~FLAG_MULT_PORT;
>>> + if (port->port_id == VIP_PORTA) {
>>> + /*
>>> + * Input A: YUV422
>>> + * Output: Y_UP/UV_UP: YUV420
>>> + * CHR_DS_1_SRC_SELECT = 3
>>> + * CHR_DS_1_BYPASS = 0
>>> + * RGB_OUT_HI_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_1_SRC_DATA_SELECT, 3);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
>>> + } else {
>>> + /*
>>> + * Input B: YUV422
>>> + * Output: Y_LO/UV_LO: YUV420
>>> + * CHR_DS_2_SRC_SELECT = 4
>>> + * CHR_DS_2_BYPASS = 0
>>> + * RGB_OUT_LO_SELECT = 0
>>> + * MULTI_CHANNEL_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev,
>>> + VIP_CHR_DS_2_SRC_DATA_SELECT, 4);
>>> + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 0);
>>> + vip_set_slice_path(dev,
>>> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
>>> + }
>>> + } else {
>>> + port->flags |= FLAG_MULT_PORT;
>>> + /*
>>> + * Input A/B: YUV422
>>> + * Output: Y_LO: YUV422 - UV_LO: YUV422
>>> + * MULTI_CHANNEL_SELECT = 1
>>> + * RGB_OUT_LO_SELECT = 0
>>> + */
>>> + vip_set_slice_path(dev, VIP_MULTI_CHANNEL_DATA_SELECT, 1);
>>> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
>>> + }
>>> +}
>>> +
>>> +static int vip_g_selection(struct file *file, void *fh,
>>> + struct v4l2_selection *s)
>>> +{
>>> + struct vip_stream *stream = file2stream(file);
>>> +
>>> + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>>> + return -EINVAL;
>>> +
>>> + switch (s->target) {
>>> + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
>>> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
>>> + case V4L2_SEL_TGT_CROP_BOUNDS:
>>> + case V4L2_SEL_TGT_CROP_DEFAULT:
>>> + s->r.left = 0;
>>> + s->r.top = 0;
>>> + s->r.width = stream->width;
>>> + s->r.height = stream->height;
>>> + return 0;
>>> +
>>> + case V4L2_SEL_TGT_COMPOSE:
>>> + case V4L2_SEL_TGT_CROP:
>>> + s->r = stream->port->c_rect;
>>> + return 0;
>>> + }
>>> +
>>> + return -EINVAL;
>>> +}
>>> +
>>> +static int enclosed_rectangle(struct v4l2_rect *a, struct v4l2_rect *b)
>>> +{
>>> + if (a->left < b->left || a->top < b->top)
>>> + return 0;
>>> + if (a->left + a->width > b->left + b->width)
>>> + return 0;
>>> + if (a->top + a->height > b->top + b->height)
>>> + return 0;
>>> +
>>> + return 1;
>>> +}
>>
>> There are helper functions in include/media/v4l2-rect.h, it would make
>> sense to add this one to that header.
>
> I'll check that out.
>
>>
>>> +
>>> +static int vip_s_selection(struct file *file, void *fh,
>>> + struct v4l2_selection *s)
>>> +{
>>> + struct vip_stream *stream = file2stream(file);
>>> + struct v4l2_rect r = s->r;
>>> +
>>> + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>>> + return -EINVAL;
>>> +
>>> + switch (s->target) {
>>> + case V4L2_SEL_TGT_COMPOSE:
>>> + case V4L2_SEL_TGT_CROP:
>>
>> Why both crop and compose when it is the same c_rect? That makes no sense.
>
> Yeah, this is always puzzling to me. When to use which and what not.
> I'll catch you on IRC sometime to chat about this.

For video capture devices cropping occurs before the DMA step, usually
in the sensor. Composing affects the DMA engine: it composes the (possibly
cropped) video frame into a buffer. E.g. the buffer might be sized for
1920x1080, but the video is 1280x720 and you want to have it DMAed to the
center of the 1920x1080-sized buffer.

This requires that the DMA engine supports this, which is uncommon for video
capture drivers. So typically video capture drivers just support cropping.

>
>>
>>> + v4l_bound_align_image(&r.width, 0, stream->width, 0,
>>> + &r.height, 0, stream->height, 0, 0);
>>> +
>>> + r.left = clamp_t(unsigned int, r.left, 0,
>>> + stream->width - r.width);
>>> + r.top = clamp_t(unsigned int, r.top, 0,
>>> + stream->height - r.height);
>>> +
>>> + if (s->flags & V4L2_SEL_FLAG_LE &&
>>> + !enclosed_rectangle(&r, &s->r))
>>> + return -ERANGE;
>>> +
>>> + if (s->flags & V4L2_SEL_FLAG_GE &&
>>> + !enclosed_rectangle(&s->r, &r))
>>> + return -ERANGE;
>>> +
>>> + s->r = r;
>>> + stream->port->c_rect = r;
>>> +
>>> + vip_dbg(1, stream, "cropped (%d,%d)/%dx%d of %dx%d\n",
>>> + r.left, r.top, r.width, r.height,
>>> + stream->width, stream->height);
>>> +
>>> + s->r = stream->port->c_rect;
>>> + return 0;
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +
>>> + return 0;
>>> +}

Regards,

Hans