[PATCH v2 00/12] iio: imu: new inv_icm42600 driver

From: Jean-Baptiste Maneyrol
Date: Wed May 27 2020 - 14:57:54 EST


Changelog
v1
-initial patch submission
v2
- formatting reworks, missing headers, code cleanup ...
- delete all debug traces
- add commentaries for better explanation of suspend/resume, timestamp, ...
- delete i2c/spi table ids keeping only of, and use I2C probe_new function
- switch calibbias to SI units and add calibias_available attribute
- use DMA-safe buffer for all regmap_bulk_* calls
- delete iio trigger usage and setup/handle interrupt in core module
- add open-drain interrupt support
- add FIFO on reference counter and buffer postenable/predisable to replace
iio trigger usage
- check that temperature data is present before copying in buffer
- add temperature sensor off when fifo is turned off
- delete timestamp channel reading
- move timestamp state in IIO device private data
- allow only 1 ODR change in a batch of data
- add driver-open-drain in devicetree YAML and delete spi options

This series add a new driver for managing InvenSense ICM-426xx 6-axis IMUs.
This next generation of chips includes new generations of 3-axis gyroscope
and 3-axis accelerometer, support of I3C in addition to I2C and SPI, and
intelligent MotionTracking features like pedometer, tilt detection, and
tap detection.

This series is delivering a driver supporting gyroscope, accelerometer and
temperature data, with polling and buffering using hwfifo and watermark,
on I2C and SPI busses.

Gyroscope and accelerometer sensors are completely independent and can have
different ODRs. Since there is only a single FIFO a specific value is used to
mark invalid data. For keeping the device standard we are de-multiplexing data
from the FIFO to 2 IIO devices with 2 buffers, 1 for the accelerometer and 1
for the gyroscope. This architecture also enables to easily turn each sensor
on/off without impacting the other. The device interrupt is used to read the
FIFO and launch parsing of accelerometer and gyroscope data. A complex
timestamping mechanism is added to handle correctly FIFO watermark and dynamic
changes of settings.

Jean-Baptiste Maneyrol (12):
iio: imu: inv_icm42600: add core of new inv_icm42600 driver
iio: imu: inv_icm42600: add I2C driver for inv_icm42600 driver
iio: imu: inv_icm42600: add SPI driver for inv_icm42600 driver
iio: imu: inv_icm42600: add gyroscope IIO device
iio: imu: inv_icm42600: add accelerometer IIO device
iio: imu: inv_icm42600: add temperature sensor support
iio: imu: add Kconfig and Makefile for inv_icm42600 driver
iio: imu: inv_icm42600: add device interrupt
iio: imu: inv_icm42600: add buffer support in iio devices
iio: imu: inv_icm42600: add accurate timestamping
dt-bindings: iio: imu: Add inv_icm42600 documentation
MAINTAINERS: add entry for inv_icm42600 6-axis imu sensor

.../bindings/iio/imu/invensense,icm42600.yaml | 86 ++
MAINTAINERS | 8 +
drivers/iio/imu/Kconfig | 1 +
drivers/iio/imu/Makefile | 1 +
drivers/iio/imu/inv_icm42600/Kconfig | 29 +
drivers/iio/imu/inv_icm42600/Makefile | 15 +
drivers/iio/imu/inv_icm42600/inv_icm42600.h | 395 +++++++++
.../iio/imu/inv_icm42600/inv_icm42600_accel.c | 784 +++++++++++++++++
.../imu/inv_icm42600/inv_icm42600_buffer.c | 583 +++++++++++++
.../imu/inv_icm42600/inv_icm42600_buffer.h | 98 +++
.../iio/imu/inv_icm42600/inv_icm42600_core.c | 782 +++++++++++++++++
.../iio/imu/inv_icm42600/inv_icm42600_gyro.c | 795 ++++++++++++++++++
.../iio/imu/inv_icm42600/inv_icm42600_i2c.c | 101 +++
.../iio/imu/inv_icm42600/inv_icm42600_spi.c | 100 +++
.../iio/imu/inv_icm42600/inv_icm42600_temp.c | 87 ++
.../iio/imu/inv_icm42600/inv_icm42600_temp.h | 30 +
.../imu/inv_icm42600/inv_icm42600_timestamp.c | 195 +++++
.../imu/inv_icm42600/inv_icm42600_timestamp.h | 85 ++
18 files changed, 4175 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
create mode 100644 drivers/iio/imu/inv_icm42600/Kconfig
create mode 100644 drivers/iio/imu/inv_icm42600/Makefile
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600.h
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_temp.c
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_temp.h
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_timestamp.c
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_timestamp.h

--
2.17.1