Re: [PATCH v1] bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot

From: Marcel Holtmann
Date: Mon May 25 2020 - 07:31:44 EST


Hi Zijun,

> Warm reboot can not restore qca6390 controller baudrate
> to default due to lack of controllable BT_EN pin or power
> supply, so fails to download firmware after warm reboot.
>
> Fixed by sending EDL_SOC_RESET VSC to reset controller
> within added device shutdown implementation.
>
> Signed-off-by: Zijun Hu <zijuhu@xxxxxxxxxxxxxx>
> ---
> drivers/bluetooth/btqca.c | 8 ++++----
> drivers/bluetooth/hci_qca.c | 27 +++++++++++++++++++++++++++
> 2 files changed, 31 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index 3ea866d..7bbdf4d 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -74,10 +74,10 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>
> ver = (struct qca_btsoc_version *)(edl->data);
>
> - BT_DBG("%s: Product:0x%08x", hdev->name, le32_to_cpu(ver->product_id));
> - BT_DBG("%s: Patch :0x%08x", hdev->name, le16_to_cpu(ver->patch_ver));
> - BT_DBG("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->rom_ver));
> - BT_DBG("%s: SOC :0x%08x", hdev->name, le32_to_cpu(ver->soc_id));
> + BT_INFO("%s: Product:0x%08x", hdev->name, le32_to_cpu(ver->product_id));
> + BT_INFO("%s: Patch :0x%08x", hdev->name, le16_to_cpu(ver->patch_ver));
> + BT_INFO("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->rom_ver));
> + BT_INFO("%s: SOC :0x%08x", hdev->name, le32_to_cpu(ver->soc_id));

if you do this then switch to bt_dew_info() please. However it should be a separate patch since it has nothing to do with what you are fixing.

>
> /* QCA chipset version can be decided by patch and SoC
> * version, combination with upper 2 bytes from SoC
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index e4a6823..a4f86e4 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1975,6 +1975,32 @@ static void qca_serdev_remove(struct serdev_device *serdev)
> hci_uart_unregister_device(&qcadev->serdev_hu);
> }
>
> +static void qca_serdev_shutdown(struct device *dev)
> +{
> + int res;
> + int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS);
> + struct serdev_device *serdev = to_serdev_device(dev);
> + struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
> + u8 ibs_wake_cmd[] = {0xfd};
> + u8 edl_reset_soc_cmd[] = {0x01, 0x00, 0xfc, 0x01, 0x05};

{ 0xAB, 0x12 } please. And these can be const.

> +
> + if (qcadev->btsoc_type == QCA_QCA6390) {
> + serdev_device_write_flush(serdev);
> + res = serdev_device_write_buf(serdev,
> + ibs_wake_cmd, sizeof(ibs_wake_cmd));
> + BT_INFO("%s: send ibs_wake_cmd res = %d", __func__, res);

We are not printing __func__ with BT_INFO. Use BT_DBG here.

> + serdev_device_wait_until_sent(serdev, timeout);
> + usleep_range(8000, 10000);
> +
> + serdev_device_write_flush(serdev);
> + res = serdev_device_write_buf(serdev,
> + edl_reset_soc_cmd, sizeof(edl_reset_soc_cmd));
> + BT_INFO("%s: send edl_reset_soc_cmd res = %d", __func__, res);
> + serdev_device_wait_until_sent(serdev, timeout);
> + usleep_range(8000, 10000);
> + }
> +}
> +
> static int __maybe_unused qca_suspend(struct device *dev)
> {
> struct hci_dev *hdev = container_of(dev, struct hci_dev, dev);
> @@ -2100,6 +2126,7 @@ static struct serdev_device_driver qca_serdev_driver = {
> .name = "hci_uart_qca",
> .of_match_table = of_match_ptr(qca_bluetooth_of_match),
> .acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
> + .shutdown = qca_serdev_shutdown,
> .pm = &qca_pm_ops,
> },
> };

Regards

Marcel