Re: [PATCH v3] thermal: qoriq: Update the settings for TMUv2

[Daniel Lezcano]

On 25/05/2020 09:21, Yuantian Tang wrote:
> For TMU v2, TMSAR registers need to be set properly to get the
> accurate temperature values.
> Also the temperature read needs to be converted to degree Celsius
> since it is in degrees Kelvin.

> Signed-off-by: Yuantian Tang <andy.tang@xxxxxxx>
> ---

[ ... ]

> @@ -202,6 +213,8 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
>  	} else {
>  		regmap_write(data->regmap, REGS_V2_TMTMIR, TMTMIR_DEFAULT);
>  		regmap_write(data->regmap, REGS_V2_TEUMR(0), TEUMR0_V2);
> +		for (i = 0; i < 7; i++)

Please wrap this litteral 7 to an explicit constant name

> +			regmap_write(data->regmap, REGS_V2_TMSAR(i), TMSARA_V2);
>  	}
>  
>  	/* Disable monitoring */
> @@ -212,6 +225,7 @@ static const struct regmap_range qoriq_yes_ranges[] = {
>  	regmap_reg_range(REGS_TMR, REGS_TSCFGR),
>  	regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)),
>  	regmap_reg_range(REGS_V2_TEUMR(0), REGS_V2_TEUMR(2)),
> +	regmap_reg_range(REGS_V2_TMSAR(0), REGS_V2_TMSAR(15)),
>  	regmap_reg_range(REGS_IPBRR(0), REGS_IPBRR(1)),
>  	/* Read only registers below */
>  	regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)),
> 


-- 
<http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog