[PATCH 2/2] refperf: Add a test to measure performance of read-side synchronization
From: Joel Fernandes (Google)
Date: Mon May 25 2020 - 00:36:58 EST
Add a test for comparing the performance of RCU with various read-side
synchronization mechanisms. The test has proved useful for collecting
data and performing these comparisons.
Currently RCU, SRCU, reader-writer lock, reader-writer semaphore and
reference counting can be measured using refperf.perf_type parameter.
Each invocation of the test runs measures performance of a specific
mechanism.
The maximum number of CPUs to concurrently run readers on is chosen by
the test itself and is 75% of the total number of CPUs. So if you had 24
CPUs, the test runs with a maximum of 18 parallel readers.
A number of experiments are conducted, and in each experiment, the
number of readers is increased by 1, upto the 75% of CPUs mark. During
each experiment, all readers execute an empty loop with refperf.loops
iterations and time the total loop duration. This is then averaged.
Example output:
Parameters "refperf.perf_type=srcu refperf.loops=2000000" looks like:
[ 3.347133] srcu-ref-perf:
[ 3.347133] Threads Time(ns)
[ 3.347133] 1 36
[ 3.347133] 2 34
[ 3.347133] 3 34
[ 3.347133] 4 34
[ 3.347133] 5 33
[ 3.347133] 6 33
[ 3.347133] 7 33
[ 3.347133] 8 33
[ 3.347133] 9 33
[ 3.347133] 10 33
[ 3.347133] 11 33
[ 3.347133] 12 33
[ 3.347133] 13 33
[ 3.347133] 14 33
[ 3.347133] 15 32
[ 3.347133] 16 33
[ 3.347133] 17 33
[ 3.347133] 18 34
Signed-off-by: Joel Fernandes (Google) <joel@xxxxxxxxxxxxxxxxx>
---
kernel/rcu/Kconfig.debug | 19 ++
kernel/rcu/Makefile | 1 +
kernel/rcu/refperf.c | 558 +++++++++++++++++++++++++++++++++++++++
3 files changed, 578 insertions(+)
create mode 100644 kernel/rcu/refperf.c
diff --git a/kernel/rcu/Kconfig.debug b/kernel/rcu/Kconfig.debug
index a4db41d9a401e..04c35e1e3c3fa 100644
--- a/kernel/rcu/Kconfig.debug
+++ b/kernel/rcu/Kconfig.debug
@@ -56,6 +56,25 @@ config RCU_TORTURE_TEST
Say M if you want the RCU torture tests to build as a module.
Say N if you are unsure.
+config RCU_REF_PERF_TEST
+ tristate "Performance tests for read-side synchronization (RCU and others)"
+ depends on DEBUG_KERNEL
+ select TORTURE_TEST
+ select SRCU
+ select TASKS_RCU
+ select TASKS_RUDE_RCU
+ select TASKS_TRACE_RCU
+ default n
+ help
+ This option provides a kernel module that runs performance tests
+ useful comparing RCU with various read-side synchronization mechanisms.
+ The kernel module may be built after the fact on the running kernel to be
+ tested, if desired.
+
+ Say Y here if you want these performance tests built into the kernel.
+ Say M if you want to build it as a module instead.
+ Say N if you are unsure.
+
config RCU_CPU_STALL_TIMEOUT
int "RCU CPU stall timeout in seconds"
depends on RCU_STALL_COMMON
diff --git a/kernel/rcu/Makefile b/kernel/rcu/Makefile
index f91f2c2cf1382..ba7d82609cbe1 100644
--- a/kernel/rcu/Makefile
+++ b/kernel/rcu/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_TREE_SRCU) += srcutree.o
obj-$(CONFIG_TINY_SRCU) += srcutiny.o
obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
obj-$(CONFIG_RCU_PERF_TEST) += rcuperf.o
+obj-$(CONFIG_RCU_REF_PERF_TEST) += refperf.o
obj-$(CONFIG_TREE_RCU) += tree.o
obj-$(CONFIG_TINY_RCU) += tiny.o
obj-$(CONFIG_RCU_NEED_SEGCBLIST) += rcu_segcblist.o
diff --git a/kernel/rcu/refperf.c b/kernel/rcu/refperf.c
new file mode 100644
index 0000000000000..20a40eb134ad1
--- /dev/null
+++ b/kernel/rcu/refperf.c
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Performance test comparing RCU vs other mechanisms
+// for acquiring references on objects.
+//
+// Copyright (C) Google, 2020.
+//
+// Author: Joel Fernandes <joel@xxxxxxxxxxxxxxxxx>
+
+#define pr_fmt(fmt) fmt
+
+#include <linux/atomic.h>
+#include <linux/bitops.h>
+#include <linux/completion.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/notifier.h>
+#include <linux/percpu.h>
+#include <linux/rcupdate.h>
+#include <linux/reboot.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <linux/stat.h>
+#include <linux/srcu.h>
+#include <linux/slab.h>
+#include <linux/torture.h>
+#include <linux/types.h>
+
+#include "rcu.h"
+
+#define PERF_FLAG "-ref-perf: "
+
+#define PERFOUT(s, x...) \
+ pr_alert("%s" PERF_FLAG s, perf_type, ## x)
+
+#define VERBOSE_PERFOUT(s, x...) \
+ do { if (verbose) pr_alert("%s" PERF_FLAG s, perf_type, ## x); } while (0)
+
+#define VERBOSE_PERFOUT_ERRSTRING(s, x...) \
+ do { if (verbose) pr_alert("%s" PERF_FLAG "!!! " s, perf_type, ## x); } while (0)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Joel Fernandes (Google) <joel@xxxxxxxxxxxxxxxxx>");
+
+static char *perf_type = "rcu";
+module_param(perf_type, charp, 0444);
+MODULE_PARM_DESC(perf_type, "Type of test (rcu, srcu, refcnt, rwsem, rwlock.");
+
+torture_param(int, verbose, 0, "Enable verbose debugging printk()s");
+
+// Number of loops per experiment, all readers execute an operation concurrently
+torture_param(long, loops, 10000000, "Number of loops per experiment.");
+
+#ifdef MODULE
+# define REFPERF_SHUTDOWN 0
+#else
+# define REFPERF_SHUTDOWN 1
+#endif
+
+torture_param(bool, shutdown, REFPERF_SHUTDOWN,
+ "Shutdown at end of performance tests.");
+
+struct reader_task {
+ struct task_struct *task;
+ atomic_t start;
+ wait_queue_head_t wq;
+ u64 last_duration_ns;
+
+ // The average latency When 1..<this reader> are concurrently
+ // running an experiment. For example, if this reader_task is
+ // of index 5 in the reader_tasks array, then result is for
+ // 6 cores.
+ u64 result_avg;
+};
+
+static struct task_struct *shutdown_task;
+static wait_queue_head_t shutdown_wq;
+
+static struct task_struct *main_task;
+static wait_queue_head_t main_wq;
+static int shutdown_start;
+
+static struct reader_task *reader_tasks;
+static int nreaders;
+
+// Number of readers that are part of the current experiment.
+static atomic_t nreaders_exp;
+
+// Use to wait for all threads to start.
+static atomic_t n_init;
+
+// Track which experiment is currently running.
+static int exp_idx;
+
+// Operations vector for selecting different types of tests.
+struct ref_perf_ops {
+ void (*init)(void);
+ void (*cleanup)(void);
+ int (*readlock)(void);
+ void (*readunlock)(int idx);
+ const char *name;
+};
+
+static struct ref_perf_ops *cur_ops;
+
+// Definitions for RCU ref perf testing.
+static int ref_rcu_read_lock(void) __acquires(RCU)
+{
+ rcu_read_lock();
+ return 0;
+}
+
+static void ref_rcu_read_unlock(int idx) __releases(RCU)
+{
+ rcu_read_unlock();
+}
+
+static void rcu_sync_perf_init(void)
+{
+}
+
+static struct ref_perf_ops rcu_ops = {
+ .init = rcu_sync_perf_init,
+ .readlock = ref_rcu_read_lock,
+ .readunlock = ref_rcu_read_unlock,
+ .name = "rcu"
+};
+
+
+// Definitions for SRCU ref perf testing.
+DEFINE_STATIC_SRCU(srcu_ctl_perf);
+static struct srcu_struct *srcu_ctlp = &srcu_ctl_perf;
+
+static int srcu_ref_perf_read_lock(void) __acquires(srcu_ctlp)
+{
+ return srcu_read_lock(srcu_ctlp);
+}
+
+static void srcu_ref_perf_read_unlock(int idx) __releases(srcu_ctlp)
+{
+ srcu_read_unlock(srcu_ctlp, idx);
+}
+
+static struct ref_perf_ops srcu_ops = {
+ .init = rcu_sync_perf_init,
+ .readlock = srcu_ref_perf_read_lock,
+ .readunlock = srcu_ref_perf_read_unlock,
+ .name = "srcu"
+};
+
+// Definitions for reference count
+static atomic_t refcnt;
+
+static int srcu_ref_perf_refcnt_lock(void)
+{
+ atomic_inc(&refcnt);
+ return 0;
+}
+
+static void srcu_ref_perf_refcnt_unlock(int idx) __releases(srcu_ctlp)
+{
+ atomic_dec(&refcnt);
+ srcu_read_unlock(srcu_ctlp, idx);
+}
+
+static struct ref_perf_ops refcnt_ops = {
+ .init = rcu_sync_perf_init,
+ .readlock = srcu_ref_perf_refcnt_lock,
+ .readunlock = srcu_ref_perf_refcnt_unlock,
+ .name = "refcnt"
+};
+
+// Definitions for rwlock
+static rwlock_t test_rwlock;
+
+static void ref_perf_rwlock_init(void)
+{
+ rwlock_init(&test_rwlock);
+}
+
+static int ref_perf_rwlock_lock(void)
+{
+ read_lock(&test_rwlock);
+ return 0;
+}
+
+static void ref_perf_rwlock_unlock(int idx)
+{
+ read_unlock(&test_rwlock);
+}
+
+static struct ref_perf_ops rwlock_ops = {
+ .init = ref_perf_rwlock_init,
+ .readlock = ref_perf_rwlock_lock,
+ .readunlock = ref_perf_rwlock_unlock,
+ .name = "rwlock"
+};
+
+// Definitions for rwsem
+static struct rw_semaphore test_rwsem;
+
+static void ref_perf_rwsem_init(void)
+{
+ init_rwsem(&test_rwsem);
+}
+
+static int ref_perf_rwsem_lock(void)
+{
+ down_read(&test_rwsem);
+ return 0;
+}
+
+static void ref_perf_rwsem_unlock(int idx)
+{
+ up_read(&test_rwsem);
+}
+
+static struct ref_perf_ops rwsem_ops = {
+ .init = ref_perf_rwsem_init,
+ .readlock = ref_perf_rwsem_lock,
+ .readunlock = ref_perf_rwsem_unlock,
+ .name = "rwsem"
+};
+
+// Reader kthread. Repeatedly does empty RCU read-side
+// critical section, minimizing update-side interference.
+static int
+ref_perf_reader(void *arg)
+{
+ unsigned long flags;
+ long me = (long)arg;
+ struct reader_task *rt = &(reader_tasks[me]);
+ unsigned long spincnt;
+ int idx;
+ u64 start;
+ s64 duration;
+
+ VERBOSE_PERFOUT("ref_perf_reader %ld: task started", me);
+ set_cpus_allowed_ptr(current, cpumask_of(me % nr_cpu_ids));
+ set_user_nice(current, MAX_NICE);
+ atomic_inc(&n_init);
+repeat:
+ VERBOSE_PERFOUT("ref_perf_reader %ld: waiting to start next experiment on cpu %d", me, smp_processor_id());
+
+ // Wait for signal that this reader can start.
+ wait_event(rt->wq, (atomic_read(&nreaders_exp) && atomic_read(&rt->start)) ||
+ torture_must_stop());
+
+ if (torture_must_stop())
+ goto end;
+
+ // Make sure that the CPU is affinitized appropriately during testing.
+ WARN_ON_ONCE(smp_processor_id() != me);
+
+ atomic_dec(&rt->start);
+
+ // To prevent noise, keep interrupts disabled. This also has the
+ // effect of preventing entries into slow path for rcu_read_unlock().
+ local_irq_save(flags);
+ start = ktime_get_mono_fast_ns();
+
+ VERBOSE_PERFOUT("ref_perf_reader %ld: experiment %d started", me, exp_idx);
+
+ for (spincnt = 0; spincnt < loops; spincnt++) {
+ idx = cur_ops->readlock();
+ cur_ops->readunlock(idx);
+ }
+
+ duration = ktime_get_mono_fast_ns() - start;
+ local_irq_restore(flags);
+
+ rt->last_duration_ns = WARN_ON_ONCE(duration < 0) ? 0 : duration;
+
+ atomic_dec(&nreaders_exp);
+
+ VERBOSE_PERFOUT("ref_perf_reader %ld: experiment %d ended, (readers remaining=%d)",
+ me, exp_idx, atomic_read(&nreaders_exp));
+
+ if (!atomic_read(&nreaders_exp))
+ wake_up(&main_wq);
+
+ if (!torture_must_stop())
+ goto repeat;
+end:
+ torture_kthread_stopping("ref_perf_reader");
+ return 0;
+}
+
+void reset_readers(int n)
+{
+ int i;
+ struct reader_task *rt;
+
+ for (i = 0; i < n; i++) {
+ rt = &(reader_tasks[i]);
+
+ rt->last_duration_ns = 0;
+ }
+}
+
+// Print the results of each reader and return the sum of all their durations.
+u64 process_durations(int n)
+{
+ int i;
+ struct reader_task *rt;
+ char buf1[64];
+ char buf[512];
+ u64 sum = 0;
+
+ buf[0] = 0;
+ sprintf(buf, "Experiment #%d (Format: <THREAD-NUM>:<Total loop time in ns>)",
+ exp_idx);
+
+ for (i = 0; i <= n && !torture_must_stop(); i++) {
+ rt = &(reader_tasks[i]);
+ sprintf(buf1, "%d: %llu\t", i, rt->last_duration_ns);
+
+ if (i % 5 == 0)
+ strcat(buf, "\n");
+ strcat(buf, buf1);
+
+ sum += rt->last_duration_ns;
+ }
+ strcat(buf, "\n");
+
+ PERFOUT("%s\n", buf);
+
+ return sum;
+}
+
+// The main_func is the main orchestrator, it performs a bunch of
+// experiments. For every experiment, it orders all the readers
+// involved to start and waits for them to finish the experiment. It
+// then reads their timestamps and starts the next experiment. Each
+// experiment progresses from 1 concurrent reader to N of them at which
+// point all the timestamps are printed.
+static int main_func(void *arg)
+{
+ int exp, r;
+ char buf1[64];
+ char buf[512];
+
+ set_cpus_allowed_ptr(current, cpumask_of(nreaders % nr_cpu_ids));
+ set_user_nice(current, MAX_NICE);
+
+ VERBOSE_PERFOUT("main_func task started");
+ atomic_inc(&n_init);
+
+ // Wait for all threads to start.
+ wait_event(main_wq, atomic_read(&n_init) == (nreaders + 1));
+
+ // Start exp readers up per experiment
+ for (exp = 0; exp < nreaders && !torture_must_stop(); exp++) {
+ if (torture_must_stop())
+ goto end;
+
+ reset_readers(exp);
+ atomic_set(&nreaders_exp, exp + 1);
+
+ exp_idx = exp;
+
+ for (r = 0; r <= exp; r++) {
+ atomic_set(&reader_tasks[r].start, 1);
+ wake_up(&reader_tasks[r].wq);
+ }
+
+ VERBOSE_PERFOUT("main_func: experiment started, waiting for %d readers",
+ exp);
+
+ wait_event(main_wq,
+ !atomic_read(&nreaders_exp) || torture_must_stop());
+
+ VERBOSE_PERFOUT("main_func: experiment ended");
+
+ if (torture_must_stop())
+ goto end;
+
+ reader_tasks[exp].result_avg = process_durations(exp) / ((exp + 1) * loops);
+ }
+
+ // Print the average of all experiments
+ PERFOUT("END OF TEST. Calculating average duration per loop (nanoseconds)...\n");
+
+ buf[0] = 0;
+ strcat(buf, "\n");
+ strcat(buf, "Threads\tTime(ns)\n");
+
+ for (exp = 0; exp < nreaders; exp++) {
+ sprintf(buf1, "%d\t%llu\n", exp + 1, reader_tasks[exp].result_avg);
+ strcat(buf, buf1);
+ }
+
+ PERFOUT("%s", buf);
+
+ // This will shutdown everything including us.
+ if (shutdown) {
+ shutdown_start = 1;
+ wake_up(&shutdown_wq);
+ }
+
+ // Wait for torture to stop us
+ while (!torture_must_stop())
+ schedule_timeout_uninterruptible(1);
+
+end:
+ torture_kthread_stopping("main_func");
+ return 0;
+}
+
+static void
+ref_perf_print_module_parms(struct ref_perf_ops *cur_ops, const char *tag)
+{
+ pr_alert("%s" PERF_FLAG
+ "--- %s: verbose=%d shutdown=%d loops=%ld\n", perf_type, tag,
+ verbose, shutdown, loops);
+}
+
+static void
+ref_perf_cleanup(void)
+{
+ int i;
+
+ if (torture_cleanup_begin())
+ return;
+
+ if (!cur_ops) {
+ torture_cleanup_end();
+ return;
+ }
+
+ if (reader_tasks) {
+ for (i = 0; i < nreaders; i++)
+ torture_stop_kthread("ref_perf_reader",
+ reader_tasks[i].task);
+ }
+ kfree(reader_tasks);
+
+ torture_stop_kthread("main_task", main_task);
+ kfree(main_task);
+
+ // Do perf-type-specific cleanup operations.
+ if (cur_ops->cleanup != NULL)
+ cur_ops->cleanup();
+
+ torture_cleanup_end();
+}
+
+// Shutdown kthread. Just waits to be awakened, then shuts down system.
+static int
+ref_perf_shutdown(void *arg)
+{
+ wait_event(shutdown_wq, shutdown_start);
+
+ smp_mb(); // Wake before output.
+ ref_perf_cleanup();
+ kernel_power_off();
+
+ return -EINVAL;
+}
+
+static int __init
+ref_perf_init(void)
+{
+ long i;
+ int firsterr = 0;
+ static struct ref_perf_ops *perf_ops[] = {
+ &rcu_ops, &srcu_ops, &refcnt_ops, &rwlock_ops, &rwsem_ops,
+ };
+
+ if (!torture_init_begin(perf_type, verbose))
+ return -EBUSY;
+
+ for (i = 0; i < ARRAY_SIZE(perf_ops); i++) {
+ cur_ops = perf_ops[i];
+ if (strcmp(perf_type, cur_ops->name) == 0)
+ break;
+ }
+ if (i == ARRAY_SIZE(perf_ops)) {
+ pr_alert("rcu-perf: invalid perf type: \"%s\"\n", perf_type);
+ pr_alert("rcu-perf types:");
+ for (i = 0; i < ARRAY_SIZE(perf_ops); i++)
+ pr_cont(" %s", perf_ops[i]->name);
+ pr_cont("\n");
+ WARN_ON(!IS_MODULE(CONFIG_RCU_REF_PERF_TEST));
+ firsterr = -EINVAL;
+ cur_ops = NULL;
+ goto unwind;
+ }
+ if (cur_ops->init)
+ cur_ops->init();
+
+ ref_perf_print_module_parms(cur_ops, "Start of test");
+
+ // Shutdown task
+ if (shutdown) {
+ init_waitqueue_head(&shutdown_wq);
+ firsterr = torture_create_kthread(ref_perf_shutdown, NULL,
+ shutdown_task);
+ if (firsterr)
+ goto unwind;
+ schedule_timeout_uninterruptible(1);
+ }
+
+ // Reader tasks (~75% of online CPUs).
+ nreaders = (num_online_cpus() >> 1) + (num_online_cpus() >> 2);
+ reader_tasks = kcalloc(nreaders, sizeof(reader_tasks[0]),
+ GFP_KERNEL);
+ if (!reader_tasks) {
+ VERBOSE_PERFOUT_ERRSTRING("out of memory");
+ firsterr = -ENOMEM;
+ goto unwind;
+ }
+
+ VERBOSE_PERFOUT("Starting %d reader threads\n", nreaders);
+
+ for (i = 0; i < nreaders; i++) {
+ firsterr = torture_create_kthread(ref_perf_reader, (void *)i,
+ reader_tasks[i].task);
+ if (firsterr)
+ goto unwind;
+
+ init_waitqueue_head(&(reader_tasks[i].wq));
+ }
+
+ // Main Task
+ init_waitqueue_head(&main_wq);
+ firsterr = torture_create_kthread(main_func, NULL, main_task);
+ if (firsterr)
+ goto unwind;
+ schedule_timeout_uninterruptible(1);
+
+
+ // Wait until all threads start
+ while (atomic_read(&n_init) < nreaders + 1)
+ schedule_timeout_uninterruptible(1);
+
+ wake_up(&main_wq);
+
+ torture_init_end();
+ return 0;
+
+unwind:
+ torture_init_end();
+ ref_perf_cleanup();
+ return firsterr;
+}
+
+module_init(ref_perf_init);
+module_exit(ref_perf_cleanup);
--
2.27.0.rc0.183.gde8f92d652-goog