[PATCH v3 00/10] Improvements to IMX290 CMOS driver

From: Andrey Konovalov
Date: Sun May 24 2020 - 15:25:33 EST


This patchset adds improvements to the existing media driver for IMX290
CMOS sensor from Sony. The major changes are adding 2 lane support,
configurable link frequency & pixel rate, test pattern generation, and
RAW12 mode support.

The link frequency & pixel rate combinations depend on various factors like
lane count, resolution and image format as per the datasheet.

Also fixes for the following issues in the existing driver are included:
* the current_format field in the struct imx290 can be used before
initialization,
* the reset signal to IMX290 isn't handled correctly,
* the bus_type field of v4l2_fwnode_endpoint structure passed as the
argument to v4l2_fwnode_endpoint_alloc_parse() function is not
initiaized.

Changes in v3:

* The review comments from Sakari are addressed
https://lkml.org/lkml/2019/12/19/705
As a part of those changes:
. null ptr checks are added to imx290_set_fmt() so that it can be called
early in the probe() function to set the default format, and to
initialize imx290->current_mode and imx290->bpp - these last two must be
set before imx290_calc_pixel_rate() is called when creating the controls
. setting imx290->bpp removed from imx290_write_current_format(). Now this
function only writes to the camera sensor registers. The call to
imx290_write_current_format() is moved from imx290_set_fmt() back to
imx290_start_streaming(): imx290_set_fmt() can be called when the sensor
is powered off, and writes to the sensor registers would fail.
. in imx290_set_ctrl() in the 12 bpp case the value the BLKLEVEL register
is restored to when the test pattern is disabled is made consistent with
imx290_12bit_settings[]
* The "IMX290 sensor driver fixes" patchset included
https://patchwork.kernel.org/cover/11407347/
* Added a patch to set the bus_type field of v4l2_fwnode_endpoint structure
before calling v4l2_fwnode_endpoint_alloc_parse()

Andrey Konovalov (4):
media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is
called
media: i2c: imx290: fix the order of the args in SET_RUNTIME_PM_OPS()
media: i2c: imx290: fix reset GPIO pin handling
media: i2c: imx290: set bus_type before calling
v4l2_fwnode_endpoint_alloc_parse()

Manivannan Sadhasivam (6):
media: i2c: imx290: Add support for 2 data lanes
media: i2c: imx290: Add configurable link frequency and pixel rate
media: i2c: imx290: Add support for test pattern generation
media: i2c: imx290: Add RAW12 mode support
media: i2c: imx290: Add support to enumerate all frame sizes
media: i2c: imx290: Move the settle time delay out of loop

drivers/media/i2c/imx290.c | 358 ++++++++++++++++++++++++++++++-------
1 file changed, 297 insertions(+), 61 deletions(-)

--
2.17.1